Manufacturers are transitioning to automotive Ethernet for in-vehicle networks to support the data speed performance required for these new systems. To ensure that Ethernet equipment operates correctly in the automotive network, components like transmitters, receivers, and cables/connector assemblies must pass a series of compliance tests.
The MDI Mode Conversion Loss measurement ensures the compliance of the Common mode EMI/EMC generated by the ECU-to-ECU communications. Learn about this measurement by reading this application note, then learn more about:
- TekExpress Automotive Ethernet 100BASE-T1 and 1000BASE-T1 Signal Separation and PAM3 Analysis solution
- Tektronix solutions for automotive applications