Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

Assistance produit et téléchargements

Bienvenue dans l'assistance produit de Tektronix

Nous serions ravis de « parler technologie » avec vous toute la journée, mais nous sommes conscients que vous avez mieux à faire. Nous avons donc simplifié le téléchargement des manuels, fiches techniques et logiciels pour tous les produits actuellement commercialisés et de nombreux produits plus anciens. Dites-nous simplement quel produit vous utilisez et nous vous proposerons le matériel de référence qui s'y rapporte.

Le modèle de produit que vous avez choisi n’est plus fabriqué et les ressources suivantes sont disponibles.

  • Manuels Type de manuel Numéro de référence : Date de publication
    Tektronix BERTScope

    Clock Recovery Declassification & Securities Instructions

    Déclassification 077110200
    Tektronix BERTScope

    BSA & BA Remote Control Guide Programmer Manual

    Programmation 077069605
    Tektronix BERTScope

    Clock Recovery Instruments Quick Start User Manual

    Utilisateur principal 071285202
    Tektronix BERTScope

    BSAPCI3 Instructions

    Utilisateur 071304600
  • Documents techniques Type de document Date de publication
    Stress Calibration for Jitter >1UI
    While measuring the amount of jitter present on a signal is relatively straight forward conceptually; when the levels of jitter are small, amounts above a bit period (1 unit interval or UI) can be more difficult. This has practical consequences for …
    Note d'application
    Characterizing an SFP+ Transceiver at the 16G Fibre Channel Rate
    Figure 1. An example Fibre Channel topology. Abstract The Fibre Channel standard is evolving to include the next generation "16G" data rate. Specifications show a line rate of 14 …
    Guide de présentation
    Stressed Eye Primer
    Figure 1. Conceptual picture of an ideal receiver. Figure 2. Simplified Receiver Block Diagram. Abstract Many high-speed serial …
    Guide de présentation
    PCI Express® Transmitter PLL Testing — A Comparison of Methods
    Abstract The electrical compliance test specification drafted by PCISIG requires testing loop response of the Phase Locked Loop (PLL) used in add-in cards to generate a local transmitter clock from a 100 MHz reference oscillator …
    Guide de présentation
    Stressed Eye: “Know What You’re Really Testing With”
    BER-based measurements can provide a better view of the stress eye opening down at the deep BER levels that the receiver will be expected to operate at when it is tested.
    Guide de présentation
    Clock Recovery Primer, Part 2
    Abstract Clock recovery is a common part of many measurements, whether as part of the test setup or part of the device under test. We’re going to look at clock recovery from a practical point of view, with emphasis on how it affects …
    Guide de présentation
    Clock Recovery Primer, Part 1
    Figure 1. If clock and data were to move in time by the same amount at the same time, a decision circuit could remove the effect of jitter. Abstract Clock recovery is a common part …
    Guide de présentation
    Dual-Dirac+ Scope Histograms and BERTScan Measurements
    Figure 1.1. Using an eye diagram to set a window around the crossing point and plot edge positions. Abstract Much has been written about the strengths and weaknesses of dual-Dirac …
    Guide de présentation
    Evaluating Stress Components using BER-Based Jitter Measurements
    Figure 1.1. Self-verification stress setup - connections to a BERTScope S or BERTScope with option SE (left). Stress user interface (right) showing the addition of individual impairments …
    Guide de présentation
    BERTScope® Bit Error Rate Testers Jitter Map “Under the Hood”
    Abstract Jitter Map is a capability on the BERTScope that uses BER measurements tomeasure Total Jitter as well as decompose jitter beyond basic Random and Deterministic Jitter. This paper introduces the reader to the methodologies …
    Note d'application
    Comparing Jitter Using a BERTScope® Bit Error Rate Testing
    Introduction In most systems, it is desirable to have each data bit have the same duration (see Figures 1(a) and 2(d)). When bits vary in length, either randomly or systematically, this is known as jitter. One traditional form of …
    Note d'application
    Six Sigma’ Mask Testing with a BERTScope® Bit Error Rate Tester
    Introduction Mask testing is a common method of estimating whether a transmitted waveform is of sufficient quality to meet system requirements. In most systems the requirement is to pass bits error free, or at least at better than 1 …
    Note d'application
    Bridging the Gap Between BER and Eye Diagrams — A BER Contour Tutorial
    Abstract This paper provides an introduction to the BER Contour measurement - what it is, how it is constructed, and why it is a valuable way of viewing parametric performance at gigabit speeds. It also provides illustrative examples …
    Note d'application
    Clock Recovery’s Impact on Test and Measurement
    Introduction Clock recovery plays a significant role in making accurate test measurements, whether incorporated into the test setup or as part of the device under test. As most gigabit communication systems are synchronous, the data …
    Note d'application
    Anatomy of an Eye Diagram: How to Construct & Trigger
      Abstract This paper describes what an eye diagram is, how it is constructed, and common methods of triggering used to generate one. It then describes different ways that information from an eye diagram can be sliced to gain more insight. It …
    Note d'application
    BERTScope™ CR125A+ 175A+ & 286A Clock Recovery Fact Sheet
    Key Specs and Ordering Information for BERTScope CR125A, 175A, & 286A Clock Recovery.
    Fiche d'informations
  • Logiciel Type de document Numéro de référence : Date de publication
    BERTSCOPE PC APPLICATION SOFTWARE - V12.04.5608
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125B) instruments that are being operated as stand-alone instruments, i.e. not connected directly to a …
    Application 063430807
    BERTSCOPE PC APPLICATION SOFTWARE - V12.04.5522
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125B) instruments that are being operated as stand-alone instruments, i.e. not connected directly to a …
    Application 063430806
    BERTScopePC Software, V 10.15.1284
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125, DPP125B, DPP125C)and BSAITS instruments that are being operated as stand-alone instruments, i.e. not …
    Application 063430803
    BERTScopeCR Help File V1.0
    BERTScope Clock Recovery Instrument Help File for offline use.
    Application 066130900
    BERTScopePC Software V 10.9.1024
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125, DPP125B) instruments that are being operated as stand-alone instruments, i.e. not connected directly to …
    Application 1000000482
  • The USB 3.1 Receiver application's Margin Test feature gives engineers quantitative answers on a design's performance and as a debug tool, a better understanding of where devices fail. This video …
    Durée: 3m 34s
    This video focuses on the Link Training Status State Machine UI feature of the USB 3.1 Gen2 Receiver test application and shows the path that is taken by a device being trained into loopback mode …
    Durée: 4m 35s
    The physical setup for USB 3.1 receiver calibration and testing is shown in this video.
    Durée: 4m 33s
    Get an overview of the optical solutions available from Tektronix. Learn about what we showcased at our OFC 2016 exhibit, then learn more about these solutions online.
    Durée: 1m 16s