與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

意見回饋

Why does the amplitude of my signal cut to half+ or even less then half+ when I add noise?

問題:

Why does the amplitude of my signal cut to half+ or even less then half+ when I add noise?

答案:

Adding noise in the AFG 3000 uses a power splitter to add the noise to the signal. When you are at the highest amplitude levels of your AFG 3000, it must reduce the amplitude of the signal, in order to be able to add noise. It will halve the amplitude, because theoretically the noise could be as high as half the amplitude, and so the AFG 3000 must accommodate that possibility. Because the noise is Gaussian, however, it rarely is that high in amplitude, so measuring peak to peak will not necessarily show double the voltage.


常見問答集 ID 56266

檢視所有常見問答集 »