問題:
I have a TDS3000 scope and just connected it to the Ethernet. In the Ethernet setup menu there is a Test Connection selection. What does the Test Connection test?
答案:
The Test Connection button pings the Gateway. If the Gateway IP Address is not specified, or specified incorrectly, the Test Connection will fail. This applies whether you are using a crossover cable or a "real" Ethernet connection. The selection is not required to communicate with the scope, it is strictly that the Test Connection button, which pings the gateway, will work.
常見問答集 ID 55806
檢視所有常見問答集 »