PPG4001 PatternPro® Programmable Pattern Generator Datasheet

PPG4001 Datasheet

Tektronix 不再銷售此產品規格表上的產品。
檢視 Tektronix Encore 以取得檢修測試設備。
檢查這些產品的支援和保固狀態。

PPG4001 Datasheet

The Tektronix PPG4001 PatternPro® programmable pattern generator provides stressed pattern generation for high-speed Datacom testing.

Notice to EU customers

This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.

Key performance specifications

Low inherent jitter (typical RJ 150 fs @40 Gb/s)
11 ps typical 20% to 80% rise/fall times
Low frequency, high amplitude jitter insertion range of 10 Hz to 10 MHz at up to 5000 UI (with Option LFJIT)
High frequency jitter insertion, including SR, RJ, and BUJ with amplitudes up to 50 ps (with Option HFJIT)
Adjustable output voltage

Key features

DC coupled differential data outputs
Full rate and sub-rate multiple clock outputs
Pattern trigger output
Built-in adjustable clock source
PRBS and user defined patterns
Front panel touch screen GUI and USB computer control

Applications

Semiconductor device testing
Optical component testing
Transceiver module testing

Product description

The Tektronix PPG4001 PatternPro® programmable pattern generator provides an unparalleled combination of industry leading performance, features, and ease of use. Design validation of today’s demanding high-speed applications requires instruments that produce the highest quality signals and enable programmable controls while being simple and easy to use.

Fast rise time and low jitter are critical performance parameters and the PPG4001 delivers typical 150 fs inherent RJ with 11 ps rise time. Within seconds of powering up the instrument, a first time user can be creating high-performance programmable patterns to test a DUT. In addition, the PPG4001 offers comprehensive jitter insertion for stressed receiver testing and similar applications.

The PPG4001 may be paired with the PED4001 40 Gb/s programmable error detector to provide a complete BERT system that includes control and analysis software.

PPG4001-PatternPro-Pattern-Generator-Datasheet--846340-9-N

Typical 40 Gb/s eye diagram

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Data outputs

Voltage amplitude

Each positive and negative differential output is independently programmable.

Single-ended: 300 mV to 1.0 V
Differential: 600 mV to 2.0 V

Offset window: -2 V to +3.3 V, programmable/adjustable

Termination voltage range

-2.0 V to +3.3 V window. Programmable/adjustable. Applied by user via 50 Ω.

This setting is used in cases where the load being driven is terminated at a level other than zero volts. The effect of termination voltage on the output voltage is shown in the following figure. To ensure proper operation, never load the output with a termination voltage less than Voh minus 3 V.

PPG4001-PatternPro-Pattern-Generator-Datasheet--846340-10-N

Rise/fall time

Scope bandwidth can impact the measured signal rise time.

20 to 80%: 11 ps, typical
10 to 90 %: 16 ps, typical

Data output jitter

Measured at 40 Gb/s with 2¹¹-1 PRBS at 500 mV_p-p, single ended

Total jitter (1E-12): 7 ps_p-p, typical
Random jitter: 200 fs, RMS, typical

Connector type: 2.4 mm

Output impedance

50 Ω: Single-ended
100 Ω: Differential

Clock outputs

Full rate clock output

AC coupled, single-ended

Frequency: 20 GHz to 40 GHz
Amplitude: 500 mV_p-p, typical
Connector type: 2.4 mm

Half rate clock output

AC coupled, differential

Amplitude: 400 mV_p-p, typical
Connector type: 2.4 mm

/n clock output

AC coupled, single ended

Programmable divider: n = 2, 4, 8, 16
Amplitude: 500 mV_p-p typical
Connector type: 2.4 mm

Trigger output

Programmed as pattern trigger or clock/n (with n = multiples of 128)

Amplitude: -500 mV to 0 V, DC coupled
Connector type: SMA

Data patterns

Pattern type: Data (from memory) or PRBS

Data rate

Programmable/adjustable

Range: 4 Gb/s to 40 Gb/s
Resolution: 10 kb/s
Accuracy: ±5 ppm

PRBS pattern lengths

2⁷ -1 bits: Polynomial = X⁷ + X⁶ + 1
2⁹ - 1 bits: Polynomial = X⁹ + X⁵ + 1
2¹¹ - 1 bits: Polynomial = X¹¹ + X⁹ + 1
2¹⁵ - 1 bits: Polynomial = X¹⁵ + X¹⁴ + 1
2²³ - 1 bits: Polynomial = X²³ + X¹⁸ + 1
2³¹ - 1 bits: Polynomial = X³¹ + X²⁸ + 1

Data pattern depth

Range: 2 to 4,194,304 bits
Resolution: 1 bit

Programmable error insertion

Error insertion can be enabled with either single bit error insertion or at a programmable rate.

Single bit errors: Yes
Programmable bit errors: 10^-3 to 10^-15 BER

Jitter insertion

High frequency jitter insertion option

Add-on option for the instrument. Sum of external, internal sine, internal noise, and BUJ. Exceeding the range can generate errors.

Total modulation range: 50 ps_p-p

Built-in sine source

Programmable from either the front panel touch screen or remote control.

Frequency range: 5 kHz to 100 MHz
Amplitude range: 0 to 50 ps_p-p
Accuracy: ±10%, typical

Built-in random noise source

Programmable from either the front panel touch screen or remote control.

Amplitude range: 0 to 5 ps_RMS
Accuracy: ±10% typical

Built-in BUJ source

Programmable from either the front panel touch screen or remote control.

Amplitude range: 0 to 50 ps_p-p
Modulation data rates: 100 Mb/s to 2.5 Gb/s
PRBS sequences: 7,9,11,15,23,31
Filter values: 25/50/100 MHz filters

External modulation input

DC coupled, 3 dB bandwidths

Frequency range: DC to 100 MHz
Amplitude range: 0 to 50 ps _p-p
Maximum input: 5 V_p-p

Low frequency jitter insertion (Option LFJIT)

Add-on option.

The specifications below apply when the data rate equals the internal clock rate frequency of 20 to 40 GHz. For each frequency octave below, the internal clock rate, the specifications below will be reduced by half. Thus when the data rate is 10 to 19.99999 Gb/s, the values below will be divided by 2. When the data rate is 5 to 9.99999 Gb/s, the values will be divided by 4.

SJ modulation range curve points

Parameter	Value
10 Hz f_mod	5000 UI_p-p
100 Hz f_mod	2000 UI_p-p
1 kHz f_mod	2000 UI_p-p
10 kHz f_mod	2000 UI_p-p
100 kHz f_mod	200 UI_p-p
1 MHz f_mod	20 UI_p-p
4 MHz f_mod	5 UI_p-p
10 MHz f_mod	2 UI_p-p
20 MHz f_mod	1 UI_p-p
30 MHz f_mod	0.67 UI_p-p
40 MHz f_mod	0.5 UI_p-p

PPG4001-PatternPro-Pattern-Generator-Datasheet--846340-11-N

Trigger system

Trigger waveform

Pattern mode: 1 pattern per trigger for pattern length = multiple of 128
128 patterns per trigger for other pattern lengths
Clock/n mode: 128 through (2³² - 128), n= any multiple of 128 in that range
Duty cycle: 50%, for either Pattern or Clock/n

High level: 0 V, typical

Low level: -500 mV, typical

Output impedance: 50 Ω, DC-coupled

Connector type: SMA

Clock inputs

Frequency range: 10 GHz to 20 GHz, half rate

Input signal: 500 mV_p-p, typical, AC coupled

Maximum input signal: 800 mV_p-p

Input impedance: 50 Ω, AC-coupled

Reference clock

Input frequency range: 10 MHz

Input signal: 1 V_p-p, typical, 50% duty square wave

Maximum input signal: 5 V_p-p, ±10 V DC, Damage threshold

Input impedance: 50 Ω, AC-coupled

Output signal: 1.2 V_p-p, typical, Square wave

10 MHz reference input/output: Yes, BNC connector

Data error insertion

Error insertion types: Single or rate-based

Error insertion rate

Range: 1 x 10^-3 to 10^-15 BER
Resolution: 3 digits

Control interfaces

Front panel touchscreen GUI: Yes, edit all instrument settings.

Computer programmable interface: USB TMC, program all instrument settings.

Physical characteristics

Front panel width (with mounting tabs): 48.3 cm (19.0 in)

Height: 13.3 cm (5.25 in)

Width: 45.1 cm (17.75 in)

Depth (rack mount): 35.1 cm (13.8 in)

Weight: 11.1 kg (24.5 lbs)

Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)

Ordering information

Models

PPG4001: 40 Gb/s programmable pattern generator, 1 channel

Options

PPG4001 LFJIT: Low frequency jitter option for the PPG4001
PPG4001 HFJIT: High frequency jitter option for the PPG4001

Power plug options

Opt. A0: North America power plug (115 V, 60 Hz)
Opt. A1: Universal Euro power plug (220 V, 50 Hz)
Opt. A2: United Kingdom power plug (240 V, 50 Hz)
Opt. A6: Japan power plug (100 V, 50/60 Hz)
Opt. A10: China power plug (50 Hz)
Opt. A11: India power plug (50 Hz)
Opt. A99: No power cord

Manuals

071-3413-xx: Printed PPG/PED Installation & Safety instructions
077-1089-xx: PPG4001 User manual, PDF-only, downloadable from Tektronix.com

	Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
	Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.

PPG4001 PatternPro® Programmable Pattern Generator Datasheet

PPG4001 Datasheet

更多資訊

Notice to EU customers

Key performance specifications

Key features

Applications

Product description

Specifications

Data outputs

Clock outputs

Data patterns

Jitter insertion

Trigger system

Clock inputs

Reference clock

Data error insertion

Control interfaces

Physical characteristics

Ordering information

Models

Options

Power plug options

Manuals