Optical Transmitter and Receiver

OI1125 • OI2125

Tektronix 不再銷售此產品規格表上的產品。
檢視 Tektronix Encore 以取得檢修測試設備。
檢查這些產品的支援和保固狀態。

OI1125 • OI2125

Features & Benefits

OI1125 E/O Transmitter

Generates SONET/SDH Compliant Optical Waveforms up to 12.5 Gb/s
Internal DFO Laser at 1550.9 nm
Adjustable Extinction Ratio from 5 dB to >12 dB (>12 dB nominal) to Test with Worst-case Conditions
Accepts a Wide Range of Input Voltage Levels from 0.25 to 1.5 V_p-p
Remote Operation and Monitoring

OI2125 O/E Receiver

High Performance Receiver Supports Data Rates up to 12.5 Gb/s
User-installable Modules for Clock Recovery at 10.664 Gb/s and 9.953 Gb/s
Broad Wavelength from 1100 to 1620 nm
High Sensitivity (-16 dBm) to Detect Low-level Optical Input Signals
Amplified Electrical Output to Connect Directly to Most Commercial Error Analyzers

Applications

Bit Error Rate Testing
Optical Receiver and Transmitter Testing
Optical Component and Fiber Loop Testing
Optical Signal Analysis
Remote Operation for System Integration

A High-performance Optical Interface for Bit Error Rate Testing of Optical Systems, Subsystems and Components up to 12.5 Gb/s

The Tektronix high-performance OI1125 E/O transmitter and OI2125 O/E receiver offer a simple and cost-effective solution for generating and receiving SONET/SDH compliant optical signals for bit error rate (BER) testing and optical signal analysis up to 12.5 Gb/s. Both include a remote port for easy integration and remote monitoring and control in a test system environment. Users can completely control instrument settings, monitor instrument status and access additional features through the remote port.

Transmitter Generates SONET/SDH Compliant Optical Waveforms up to 12.5 Gb/s for Testing Optical Subsystems and Components

Using the internal 1550 nm DFB laser or an external C-band tunable laser, the OI1125 is excellent for generating optical signals modulated by a high-performance pattern generator and is designed so most commercial generators connect directly to the modulation input. The input voltage range (250 mV to 1.5 V) accommodates most commercial pattern generators for bit error ratio (BER) testing of optical components and receiver testing. The adjustable extinction ratio allows testing the receiver sensitivity at worst-case conditions without complex test setups. The OI1125 also generates optical signals for optical signal analysis of components, systems and subsystems using a CSA8000 sampling oscilloscope.

Receiver Clock Recovery and Multi-data Rate Support Simplify Testing of High-performance Optical Transmitters, Laser Diodes, Optical Components and Fiber Loops

The OI2125 O/E Receiver receives modulated optical signals up to 12.5 Gb/s from transmission systems, including SONET/SDH compatible systems, and converts them to electrical signals for further testing by equipment such as a bit error rate tester (BERT). The OI2125 electrical output can be connected directly to most commercial error analyzers, and does not require an external amplifier. The data and clock output voltage ranges (0.5 to 1.5 V_p-p) make the OI2125 an excellent optical interface for most commercial error analyzers.

With the optional OM1420 module, the receiver can extract the clock on signals up to 10.664 Gb/s (OC-192 FEC). The recovered clock signal can then be used to trigger a CSA8000 sampling oscilloscope or serve as the clock input to an error analyzer. Used with the Tektronix TDS/CSA8000 series sampling oscilloscope and a pattern generator, the OI1125 can create modulated optical signals for high-speed optical communications testing, extinction ratio measurements, eye-pattern analysis and optical signal analysis. The optical signal is passed through the DUT and received by the appropriate 80Cxx sampling head on the oscilloscope.

The OM1420 OC-192 Dual-rate Clock Recovery Module supports standard OC-192 (9.953 Gb/s) and OC-192 FEC (10.664 Gb/s).

Characteristics

OI1125 E/O Transmitter Specifications

Specification	Min	Typ	Max	Units	Comments
Data Rate*¹	2.4		12.5	Gb/s
Data Input Voltage	0.25		1.5	V_p-p
Int. (DFB) Wavelength	1550.82	1550.92	1551.02	nm	±1 nm adjustment range
Ext. (Modulator) Wavelength Range*²	1530		1565	nm
Input Power	<5		+12	dBm
Extinction Ratio	12			dB	Up to OC-192
Extinction Ratio	10			dB	Rates >OC-192
Adjustable Extinction Ratio*³	5		>12	dB	(typical)
Peak-to-peak Jitter			0.15	UI	Up to OC-192
Peak-to-peak Jitter		15	18	ps	Rates >OC-192 Data Input Voltage 0.5 to 1.5 V_p-p
Random Jitter			0.02 UI up to OC-192	2 ps_RMS Rates >OC-192
Output Power	+0	+2	+4	dBm	Using the internal laser
Insertion Loss			8	dB
Percent Crossing	45		55	%
Eye Mask Testing*⁴	GR-1377-CORE GR-253-CORE

*¹ Data rates down to 622 Mb/s are achievable, but specifications are not guaranteed at rates below 2.4 Gb/s.

*² Wavelength range from 1565 nm to 1600 nm is achievable, but specifications are not guaranteed above 1565 nm.

*³ The range of adjustment for the extinction ratio may vary from unit to unit, but is typically 5 dB to >12 dB. The OI1125 is calibrated with the adjustable extinction ratio disabled. Specifications are guaranteed at the calibrated (fixed) position.

*⁴ No mask hits with 5% mask margin for OC-48, OC-192, and 12.5 Gb/s (scaled OC-192 mask).

OI2125 O/E Receiver Specifications

Specification	Min	Typ	Max	Units	Comments
Data Rate	2.4		12.5	Gb/s
Wavelength (typical)*⁵	1100		1620	nm
Input Power	-16		+0	dBm
Loss of Signal Threshold	-27	-25	-23	dBm
Input Fiber Size		9		um
Data Output Voltage	0.05		1.5	V_p-p	-8 to +0 dBm input power
Data Output Voltage	0.2		1.5	V_p-p	-16 to -8 dBm input power
Upper Bandwidth	7.5			GHz
Lower Bandwidth			50	MHz
Jitter (rms)			1.5	ps_RMS	-8 to +0 dBm input power
Percent Crossing	45		55	%
Eye Mask Testing*⁶	GR-1377-CORE GR-253-CORE

*⁵ Manufacturer specifications for the photodiode are 1100 to 1620 nm. The OI2125 specifications are tested and verified for 1530 to 1565 nm, but are not verified beyond this range.

*⁶ No mask hits with 5% mask margin for OC-48, OC-192 and 12.4 Gb/s (scaled OC-192 mask) at an input power of 0 to -8 dBm. For input power levels down to -16 dBm, a minimum BER of 10^-12 is typical for rates up to OC-192, and 10^-10 for rates above OC-192.

Environment

Temperature -

Operating: 0 °C to +40 °C.

Nonoperating: -40 °C to +71 °C.

Humidity -

Operating: 5% to 95% RH (up to +30 °C).

5% to 45% RH (30 °C to +50 °C).

Nonoperating: 5% to 95% RH (up to +30 °C).

5% to 45% RH (30 °C to +50 °C).

Altitude -

Operating: Up to 3000 m (10,000 ft.).

Nonoperating: Up to 12,000 m (40,000 ft.).

EMC Compliance - Meets or exceeds EN55011 Class A Radiated and Conducted Emissions; FCC47 CFR, Part 15, Subpart B, Class A.

Safety - UL3111-1; CSA1010.1; EN61010-1; IEC61010-1.

Power Supply

Rating - 100 to 240 VAC.

Range - 90 to 265 VAC.

Maximum Power and Current - 40 W Max.

Frequency - 47 to 63 Hz.

I/O Interface

OI1125 E/O Transmitter -

Laser In (Optical) FC/APC PMF.

Modulator Data In (Electrical SMA).

Low-Frequency Direct Modulation (Electrical SMA).

Laser Out (Optical) FC/APC PMF.

Modulator Out (Optical) FC/APC: Universal.

Remote Interface/Laser Interlock (DB25).

OI2125 O/E Receiver -

Optical Input (Optical) FC: Universal.

Data Out (Electrical SMA).

Attenuated Data Out (Electrical SMA).

Remote Interface (DB25).

Physical Characteristics

OI1125 E/O TRANSMITTER
Dimensions	mm	in.
Weight	kg	lbs.
OI2125 O/E RECEIVER
Dimensions	mm	in.
Weight	kg	lbs.
SHIPPING WEIGHT WITH PACKAGING
Instrument/Module	kg	lbs.
RACKMOUNT
Dimensions	mm	in.
Height	45	1.75
Width	204	8
Depth	331	13
Instrument only	1.72	3.79
Height	45	1.75
Width	204	8
Depth	331	13
Instrument only	1.91	4.20
With slot cover installed	2.09	4.62
With OM1420 installed	2.26	4.99
OI1125	5.12	11.39
OI2125	5.49	12.22
Height	89	3.5
Width	483	19
Depth	477	18.75

Ordering Information

OI1125

E/O Transmitter

Service

Opt. C3 - Calibration Service 3 Years

Opt. C5 - Calibration Service 5 Years

Opt. D1 - Calibration Data Report

Opt. D3 - Calibration Data Report 3 Years (with Option C3)

Opt. D5 - Calibration Data Report 5 Years (with Option C5)

Opt. R3 - Repair Service 3 Years

Opt. R5 - Repair Service 5 Years

Included Accessories

071-1052-00 - User Reference: English only.

006-8018-01 - Important Documents Folder.

Certificate of Calibration: NIST, MIL-STD-45662A and ISO Calibration Certificate.

Placed inside "Important Documents Folder."

119-5155-00 - Optical Adapter (FC).

015-1022-01 - Terminator (1 each).

131-7350-00 - Laser Safety Interlock.

174-4664-00 - Polarization Maintaining Single-mode Fiber Cable (FC/APC) (<1 ft. long).

174-4727-00 - Optical Cable (FC/APC-FC/PC) (2 m long).

015-0561-00 - Electrical Cable, SMA, (1 m long).

006-8217-00 - Optical Cleaning Kit.

Please specify power plug when ordering.

Recommended Accessories

174-4725-00 - Optical Cable, Polarization Maintaining, (FC/APC Narrow Key) (2 m long).

TVGF13 - Dual Rackmount Kit.

119-5115-00 - FC/APC Optical Adapter.

119-5888-00 - ST/APC Optical Adapter.

119-5116-00 - SC/APC Optical Adapter.

119-5887-00 - DIN/APC 47256 Optical Adapter.

Power Plug Options

Opt. A0 - US Plug, 115 V, 60 Hz

Opt. A1 - Euro Plug, 220V, 50 Hz

Opt. A2 - UK Plug, 240V, 50 Hz

Opt. A3 - Australian Plug, 240V, 50 Hz

Opt. A5 - Swiss Plug, 220V, 50 Hz

Opt. A99 - No Power Cord

Opt. AC - China Plug, 50 Hz

OI2125

O/E Receiver

Service

Opt. C3 - Calibration Service 3 Years

Opt. C5 - Calibration Service 5 Years

Opt. D1 - Calibration Data Report

Opt. D3 - Calibration Data Report 3 Years (with Option C3)

Opt. D5 - Calibration Data Report 5 Years (with Option C5)

Opt. R3 - Repair Service 3 Years

Opt. R5 - Repair Service 5 Years

Included Accessories

071-1053-00 - User Reference: English only.

006-8018-01 - Important Documents Folder.

Certificate of Calibration: NIST, MIL-STD-45662A and ISO Calibration Certificate.

Placed inside "Important Documents Folder."

119-5155-00 - Optical Adapter (FC).

015-1022-01 - Terminator (2 each).

174-3922-00 - Optical Cable (FC/PC-FC/PC) (2 m long).

015-0561-00 - Electrical Cable, SMA, (1 m long).

006-8217-00 - Optical Cleaning Kit.

119-6690-00 - Module Assy, Clock Recovery Slot Cover.

Please specify power plug when ordering.

Recommended Accessories

OM1420 - OC-192 Dual-rate Clock Recovery Module.

TVGF13 - Dual Rackmount Kit.

131-7368-00 - Optical Attenuator, 5 dB.

119-5115-00 - FC/PC Optical Adapter.

119-5888-00 - ST/PC Optical Adapter.

119-5116-00 - SC/PC Optical Adapter.

119-5887-00 - DIN/PC 47256 Optical Adapter.

119-4517-00 - SMA 2.5 Optical Adapter.

119-4556-00 - Diamond Optical Adapter.

119-4557-00 - SMA Optical Adapter.

119-4558-00 - Diamond 3.5 Optical Adapter.