與我們聯絡

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

High-Performance Differential Probes

P7350 • P7330 • P6330 Datasheet

Tektronix 不再銷售此產品規格表上的產品。
檢視 Tektronix Encore 以取得檢修測試設備。
檢查這些產品的支援和保固狀態。

下載產品規格表
更多資訊

線上參閱：

P7350 • P7330 • P6330 Datasheet

Tektronix’ proven expertise in probes brings you the highest fidelity in high-speed differential probing. The P7350, P7330, and P6330 high-bandwidth differential probes offer excellent signal fidelity, meeting the needs of engineers in design and debug of technologies with very fast clock speeds and edge rates. They provide high-bandwidth, low circuit loading, low-noise differential probing solutions for high-speed circuit designers.

Notice to EU customers

This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.

Key performance specifications
  • 5 GHz to 3.5 GHz bandwidths (typical)
  • Low input capacitance:
  • ≥60 dB (1000:1) Common Mode Rejection Ratio (CMRR) at 1 MHz (P7330, P6330 typical)
Key features
  • High-bandwidth, low-noise differential probing
  • Small probe head allows easy probing of SMDs
Applications
  • Communications (Gigabit Ethernet, Fibre Channel, InfiniBand)
  • Semiconductor characterization and validation
    • PCI Express
    • Serial ATA
    • IEEE 1394 
    • USB 2.0 (The P7350 is not recommended for USB 2.0 compliance testing)
    • MIPI® D-PHY
    • DDR
  • Disk drive design

P7350

The P7350 improves usability with variable spacing and solder-down capability, and a small form factor for ease of use on densely packed circuit boards with difficult-to-reach probe points. It employs the patented TekConnect® interface, which preserves signal integrity to 10 GHz and beyond to meet present and future bandwidth needs.

P7330 and P6330

The P7330 and P6330 enable users to make time-domain or frequency-domain measurements on high-bandwidth signals commonly found in digital IC designs, communication applications, and disk drive applications. The P7330 and P6330 provide high-bandwidth, low circuit loading, and low-noise differential probing solutions. The small probe head geometry and assorted probe tip accessories allow these probes to easily accommodate manual probing of surface-mount devices.

Performance you can count on

Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Model overview
Characteristic P7350 P7330 P6330
Rise Time
Bandwidth 5.0 GHz 3.5 GHz 3.5 GHz
Attenuation 6.25x 5x 5x
Differential Input C
Differential Input Resistance 100 kΩ 100 kΩ 100 kΩ
Differential Input Range ±2.5 V (20 °C to 30 °C) ±2 V (20 °C to 30 °C) ±2 V (20 °C to 30 °C)
Common Mode Input Range +6.25 V to -5 V +5 V to -4 V +5 V to -4 V
Max Voltage (nondestruct) ±15 V (DC + peak AC) ±15 V (DC + peak AC) ±15 V (DC + peak AC)
CMRR >55 dB at 1 MHz (typical) >60 dB at 1 MHz (typical) >60 dB at 1 MHz (typical)
Noise Approx. 46 nV/root Hz Approx. 35 nV/root Hz Approx. 35 nV/root Hz
Interface TekConnect TekConnect TEKPROBE II BNC
Cable Length 1.3 m 1.3 m 1.3 m

Ordering information

Models
P7350

5.0 GHz Differential Probe for TekConnect Interface. Supports DSA8300, MSO/DPO70000C/D/DX, CSA/TDS8200, CSA/TDS8000, CSA/TDS7000/B, and TDS6000/B/C Series. 1

P7330

3.5 GHz Differential Probe for TekConnect Interface. Supports DSA8300, MSO/DPO70000C/D/DX, CSA/TDS8200, CSA/TDS8000, CSA/TDS7000/B, and TDS6000/B/C Series. 1

P6330

3.5 GHz Differential Probe for TEKPROBE II® BNC Interface. Supports MSO/DPO70000C/D/DX, CSA/TDS7000/B, TDS6000/B/C, TDS700, TDS600 Series. 2

All Include: One-year warranty, plus see Accessories table below.

1DSA8300, CSA/TDS8200, CSA/TDS8000 Series requires the use of the 80A03 TekConnect Interface Adapter.

2TDS6000/B/C or TekConnect TDS7000/B Series oscilloscopes require a TCA-BNC adapter.

Standard accessories
  P7350 P7330 P6330
Accessory Part Number Quantity Part Number Quantity Part Number Quantity
Y Lead Adapter 196-3434-xx 2 each 196-3434-xx 2 each 196-3434-xx 2 each
3 in. Ground Lead (Pkg of 2) 196-3469-xx 1 pkg 196-3469-xx 1 pkg 196-3469-xx 1 pkg
SMT KlipChip™ Adapter 206-0569-xx 2 each 206-0569-xx 2 each 206-0569-xx 2 each
TwinFoot™ Adapter (Pkg of 4) 016-1785-xx 1 pkg 016-1785-xx 1 pkg 016-1785-xx 1 pkg
Square Pin Adapter (Pkg of 4) 016-1884-xx 1 pkg 016-1884-xx 1 pkg 016-1884-xx 1 pkg
Plastic Accessory Box 006-7164-xx 1  006-7164-xx 1  006-7164-xx 1 
Coding Color Marker Kit 016-1886-xx 1 set 016-1315-xx 1 set 016-1315-xx 1 set
Variable Spacing Adapter (pkg of 4) 016-1885-xx 1 pkg 016-1885-xx 1 pkg 016-1885-xx 1 pkg
Probe Carrying Case 016-1952-xx 1  016-1952-xx 1  016-1952-xx 1 
Instruction Manual 071-1238-xx 1  071-0758-xx 1  071-0757-xx 1 
Certificate of Traceable Calibration and Calibration Data Report - 1  - 1  - 1 
Antistatic Wrist Strap 006-3415-xx 1  006-3415-xx 1  006-3415-xx 1 
Pin Jumper Lead 196-3473-xx 2  196-3473-xx 2  196-3473-xx 2 
Solder In Kit 020-2505-xx 1  - - - -
Recommended accessories
IEEE 1394 Breakout Connector

Order 679-5027-xx

IC Grabber
Order 013-0309-xx (Pkg of 2)
Service options
Opt. C3
Calibration Service 3 Years
Opt. C5
Calibration Service 5 Years
Opt. D3
Calibration Data Report 3 Years (with Opt. C3)
Opt. D5
Calibration Data Report 5 Years (with Opt. C5)
Opt. G3
Complete Care 3 Years (includes loaner and more). P7330, P7350 only
Opt. G5
Complete Care 5 Years (includes loaner and more). P7330, P7350 only
Opt. R3
Repair Service 3 Years (including warranty)
Opt. R5
Repair Service 5 Years (including warranty)
Related products
1103 
TEKPROBE® II power supply for interfacing with other BNC instruments
80A03
TekConnect probe interface module for DSA8300, TDS/CSA8000 Series oscilloscopes
Power plug options for the 1103
A0
North America power
A1
Universal EURO power
A2
United Kingdom power
A3
Australia power
A4
240 V, North America power
A5
Switzerland power
A6

Japan power

A99
No power cord
A10
China power
A11
India power
A12
Brazil power


  • 60W-13756-16

    P7350-P7330-P6330-Probes-Datasheet--782696-9-N
         		Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.