Загрузить

Загрузить руководства, технические описания, программное обеспечение и т. д.:

ТИП ЗАГРУЗКИ
МОДЕЛЬ ИЛИ КЛЮЧЕВОЕ СЛОВО

Обратная связь

Поддержка приборов и материалы для загрузки

Добро пожаловать на страницу технической поддержки продуктов Tektronix

Специалисты компании готовы часами говорить с клиентами на технические темы, но мы ценим ваше время. Поэтому мы максимально упростили загрузку руководств, технических описаний и программного обеспечения для выпускаемых приборов и многих продуктов, которые сняты с производства. Просто укажите, каким продуктом вы пользуетесь, и мы предоставим все имеющиеся материалы.

Модель, номер которой вы выбрали, в настоящее время находится в продаже. В наличии есть следующая справочная информация.

  • Техническое описание Номер публикации: Дата выпуска
    AC/DC Current Probes
    TCP0020 AC/DC Current Probe.
    51W-28098-1
  • Watch this demo video to learn how Tektronix High Speed Interface (HSI) can boost performance speed to be much faster than traditional VISA- and SCPI-based waveform data transfer.
    Длительность: 6m 7s
    For RF design engineers, validation and verification engineers, or radar and EW systems engineers working on wideband radar systems, satellite communications systems, and other high-bandwidth RF …
    Длительность: 03:36
    TekScope v2.12 includes a built-in screenshot capture feature, HSI enhancements supporting 2.5Gbps USB to ethernet adapters, digital power management, protocol decodes and more.  Watch this short …
    Длительность: 2m 22s
    Learn how spectrum analysis on a 5 Series B MSO, along with voltage-vs-time waveforms, provides more insight into power rail noise.   Note: A 5 Series MSO is used in this video, but the same …
    Длительность: 05:23
    See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO …
    Длительность: 0h 6m 15s
    The switching performance of power semiconductors is often characterized using double pulse tests. This testing is now being widely applied to GaN and SiC MOSFETs. This video explains how to use …
    Длительность: 7 minutes
    Wide Bandgap power devices (SiC and GaN) offer significant benefits and are smaller, faster and more efficient than their silicon counterpart. But they also present several validation challenges …
    Длительность: 24:07
    This video demonstrates Time Domain Reflectometry (TDR) measurements using a 6 Series MSO oscilloscope.  (TDR measurements are also available on 4 and 5 Series MSOs.) Having TDR measurements on …
    Длительность: 7
    Watch this video to learn what's new in V1.4 of tm_devices - the Tektronix device management package that enables better control and usage of test & measurement devices in Python scripts.
    Длительность: 3m 47s
    Control your oscilloscope and analyze your measurements at home.  Learn how to connect to a 5 Series B MSO remotely, save measurements, and analyze waveforms on your PC.   Note: A 5 Series MSO is …
    Длительность: 04:32
    Combining the power of Python and Tektronix oscilloscopes makes complex testing procedures more efficient, accurate and customizable. This short video shows how to use tm_devices, the Tektronix …
    Длительность: 2m 5s
    Watch a demonstration of the Wide Bandgap Double Pulse Test application (Opt. WBG-DPT) on the 5 Series B MSO oscilloscope. The application makes testing easier by providing precise double-pulse …
    Длительность: 1:07
    See how oscilloscopes such as the 6 Series B MSO Mixed Signal oscilloscope are enabled by advanced features of Tektronix SignalVu-PC software to provide RF spectral and modulation analysis across …
    Длительность: 5:08
    CAN XL is a third generation of CAN bus, designed to bridge gaps between existing CAN standards and higher data-rate standards such as Automotive Ethernet.  This short video shows how to set up …
    Длительность: 3m 45s
    Frequency settling time, an essential measurement in the design and evaluation of programmable oscillators, phase locked loop circuits, RF synthesizers and more, becomes much easier when the …
    Длительность: 14:12
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) transmitter (Tx) testing with a disturber.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software.  …
    Длительность: 6:38
    Having an arbitrary/function generator built into your oscilloscope is useful and convenient. Learn about the AFG outputs available in 2, 4, 5 and 6 Series MSOs.
    Длительность: 4m 56s
    Built-in logic analysis on mixed signal oscilloscopes expand visibility into digital systems. This video gives a quick overview of the logic probe, settings, triggering and searches.
    Длительность: 3m 4s
    Learn how the Advanced Power Supply Measurements and Analysis package for Tektronix oscilloscopes simplifies analysis of power conversion systems with automated power quality, harmonics, switching …
    Длительность: 7m 46s
    This video covers the basics of CAN bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    Длительность: 5m 16s
    Making measurements on the PWM outputs of inverters and motor drives is challenging. Learn about automated 3-phase power measurement packages on 4, 5 and 6 Series B MSO oscilloscopes that deliver …
    Длительность: 7m 26s
    This video covers the basics of SPI bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    Длительность: 5m 18s
    This video covers the basics of I2C bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    Длительность: 5m 12s
    The 4 Series B MSO is a versatile addition to your bench, addressing scores of signal types and applications. This video touches on available probes, RF spectrum analysis, mixed signal analysis …
    Длительность: 5m 8s
    This video will give you a taste of the 4 Series B MSO's award-winning user interface, integrating an HD touchscreen display with traditional knobs and buttons. By the end of this video you will …
    Длительность: 3m
    The 4 Series B MSO oscilloscope offers powerful measurement and debugging tools. Watch this video to learn about visual triggers, segmented memory, 12 to 16-bit vertical resolution, automated …
    Длительность: 3m 50s
    For new engineering students, gaining a quick understanding of fundamental concepts is an important step in the learning process. This updated video explains the fundamental principles of the Fast …
    Длительность: 4m 3s
    This video provides an overview of the new 4 Series B MSO oscilloscope, including key measurement specifications and highlighting the new faster processor, analysis capabilities and the award …
    Длительность: 3m 7s
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) return loss testing.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software.  Hardware includes a …
    Длительность: 4:40
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) testing.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress software to perform the testing.  Hardware includes a Tektronix …
    Длительность: 6:32
    Learn about the many types of RF analysis available on the 4, 5 and 6 Series MSOs, enabled by the patented integrated digital downconverters behind each channel. This overview touches on …
    Длительность: 1:51
    Customers across all industries and applications are using automation to extend the capabilities of their oscilloscopes.  Here we cover what you need to get started programming scopes in Python.  …
    Длительность: 31:09
    Watch this short video to learn about the new features in TekScope version 2.4, including TekScope Basic – a new free tier license, maintenance licenses, fast frames with improved support, a new …
    Длительность: 4m 39s
    See how you can get more insight to transient and dynamic behavior of the spectral content of your signals. Using the new spectrogram feature, an enhancement of the RF vs time option for Spectrum …
    Длительность: 7:15
    With electric vehicles (EVs) increasingly becoming mainstream, the industry must create a convenient and reliable EV charging network to ensure driving adoption. Watch as we discuss what's coming …
    Длительность: 26:18
    How to use Tektronix 4, 5 and 6 Series MSO oscilloscopes to decode and analyze Near Field Communications (NFC) wirelessly, using a near field probe and the RFNFC package on the instrument.
    Длительность: 6:02
    Gain new insights into the field of power electronics including market overviews and an overview of new device technologies from Dr. Ana Villamor, Team Lead Analyst for power electronics, Yole …
    Длительность: 28:44
    Motor designers typically measure direct-quadrature-zero (dq0) using custom built embedded control software together with hardware having an FPGA for Field Oriented Control (FOC). This session …
    Длительность: 20:42
    Hear an overview of SignalVu, Tektronix's RF and vector signal analysis platform. Tektronix' spectrum analyzers and oscilloscopes combined with SignalVu uniquely allows you to view live spectral …
    Длительность: 00:12:51
    Autonomous driving and connected vehicle are driving higher speed in-vehicle networks, such as Automotive Ethernet. This webinar offers insights into the new measurement requirements for the …
    Длительность: 55:37
    Power rail noise is one of the most significant sources of jitter in high-speed systems, phase noise in RF systems, and noise in A/D and D/A converters.  Semiconductor manufacturers are responding …
    Длительность: 27:30
    Watch as we discuss techniques for properly testing Silicon Carbide (SiC) devices.  We'll review considerations for creating a double pulse test setup.  We offer an overview of basic equipment …
    Длительность: 30:05
    Silicon carbide (SiC) MOSFETs are supplanting silicon IGBTs in the drivetrain inverter of battery electric vehicles. While today SiC claims only around 5% of the market, with the vast majority of …
    Длительность: 30:07
    A demonstration of 100BASE-T1 Automotive Ethernet protocol decoding on a 6 Series MSO oscilloscope.  This video shows how full-duplex 100BASE-T1 can be separated and decoded without breaking the …
    Длительность: 5:21
    This vides shows how to set up the 5 Series MSO mixed signal oscilloscope to work as a CAN bus decoder for automated CAN or CAN FD bus decoding, triggering, and search.
    Длительность: 2m 23s
    Watch as panelists discuss emerging technologies and the feedback loop between signal integrity and power integrity. See how to combine jitter and power integrity analysis into a formidable tool …
    Длительность: 35:32
    This explains how to use an oscilloscope equipped with control loop response measurement capability to measure the frequency response (Bode Plot) of a power supply control loop. A Bode plot …
    Длительность: 01:39
    Make extremely accurate power rail measurements using two Tektronix power rail probes, a Keithley DMM6500 touchscreen Digital Multimeter, and ultra-low-noise 6 Series mixed signal oscilloscope …
    Длительность: 0h 1m 46s
    See how RF design and validation engineers working on MIMO, phased-array and beam-forming systems can make fast, accurate pulse and phase measurements on as many as 8 channels using SignalVu-PC …
    Длительность: 4m 37s
    Watch this demonstration to learn about switching loss measurements on a SiC MOSFET with a 5 Series B MSO.
    Длительность: 5 minutes
    With many new features, the TBS2000B oscilloscope is a great option to replace our recently discontinued TDS2000 line of oscilloscopes. This video covers five key reasons to consider upgrading to …
    Длительность: 2m 34s
    Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering …
    Длительность: 0h 3m 14s
    Watch our Mixed-Signal Oscilloscope capturing multiple RF channels and performing RF analysis of radar pulses. Here we're taking advantage of the high-bandwidth and independent digital …
    Длительность: 57s
    Technical Marketing Manager Wilson Lee discusses important criteria to use when choosing your next oscilloscope. In this webinar, you will learn about:• The “5 times rule” to avoid Bandwidth …
    Длительность: 43m 11s
    Watch this video to see more on the advanced features and performance that you can expect from the TBS2000 Series. From longer recording time, flexible triggering, automated measurements, easy …
    Длительность: 7m 7s
    This video tutorial will introduce you to basic time and amplitude measurements using built-in automated measurement functions available on TBS2000 series oscilloscopes. You will be guided through …
    Длительность: 3m 58s
    Anyone can twiddle the knobs on a scope and get something. And there’s always “Autoset” in a pinch. But do you know how to compensate a probe? How about the difference between a 1X and 10X probe? …
    Длительность: 6m 37s
    Find out how to take voltage and time measurements off the oscilloscope display and by using cursors.
    Длительность: 7m 45s
    With the built-in courseware feature, the TBS1000C and TBS2000B oscilloscopes become a powerful educational tool enabling students to create labs on their computer and view them right on the …
    Длительность: 1m 54s
    Have you ever struggled to get a stable waveform on your scope? This video will show you how to set your triggers to get a stable display of signals from simple sine waves to modulated signals and …
    Длительность: 5m 57s
    This video tutorial will show you how to make important amplitude measurements using built-in automated measurement functions on a digital oscilloscope. It covers the definitions of average, RMS …
    Длительность: 10m 39s
    Many oscilloscope measurements are used for characterizing pulse signals or digital data. While you can always use cursors or estimate the measurement off the disply, it's often easier and more …
    Длительность: 9m 31s
    In the 2nd video on triggering an oscilloscope, we look at pulse width triggering, trigger hold-off and runt pulse triggers. These techniques will come in handy when capturing digital signals and …
    Длительность: 5m 15s
    Learn about our USB4 receiver testing solution which offers comprehensive coverage for compliance requirements outlined by the USB Implementers Forum or USB-IF to give you confidence that your …
    Длительность: 6m 24s
    Double-pulse testing is the standard method for measuring the switching parameters of MOSFETs or IGBT power devices. Historically it has been a time-consuming process. However, the Tektronix …
    Длительность: 5:17
    A demonstration of serial bus protocol decoding, display and searching on the 5 Series B MSO. Examples using CAN, USB 2.0, SPI are shown.
    Длительность: 06:25
    Watch this short video to see how to use the Raspberry Pi as a remote control PC for test automation with the Tektronix 2 Series MSO Mixed Signal Oscilloscope and Python language.
    Длительность: 3m 50s
    Being able to easily collect waveform data from your oscilloscope is essential when performing a variety of applications. Fortunately, there many options to export data from your TBS2000B and then …
    Длительность: 1m 56s
    See how the RF vs Time hardware triggering capability (Spectrum View) on the 4, 5, and 6 Series MSO oscilloscopes can capture a low amplitude RF emission.  This video focuses on the low amplitude …
    Длительность: 4:23
    When making radar measurements, it is critical to have  synchronous measurements by a single digitizer. Watch our short video in which Alex Krauska, Solutions Engineer, demonstrates making four …
    Длительность: 2m 12s
    Learn about the domain/zonal controllers and discuss what changes it will bring for in-vehicle network architectures, highlighting some of the testing challenges measurement requirements. 
    Длительность: 57:08
    MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobile applications.  Oscilloscope-based protocol layer validation enables isolating …
    Длительность: 31:33
    Automotive Ethernet with PAM3 introduces new test challenges. Tektronix' new, innovative, non-intrusive Signal Separation simplifies Automotive Ethernet testing and set-up, providing advanced …
    Длительность: 0h 8m 3s
    In this short video, we demo the CAN FD bus decoding process on the flexible MDO3000 oscilloscope. 
    Длительность: 4m 28s
    The Tektronix MDO4000C mixed domain oscilloscope can measure digital, analog, and RF signals all at once enabling engineers to troubleshoot complex embedded designs more quickly. Learn more »
    Длительность: 1m 7s
    A demonstration of TekExpress Automotive Ethernet, an automated application, for Automotive Multigigabit Ethernet (IEEE802.3ch) Compliance Testing.
    Длительность: 6:56
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length and enables their Spectrum …
    Длительность: 29:31
    Watch this video learn about the new features in TekScope version 1.44, including RF analysis capabilities, added support for the MSO2000 and MSO2000B oscilloscopes, user interface improvements …
    Длительность: 8m 8s
    Watch this short demo of RF vs Time hardware trigger to see how an ASK (Amplitude Shift-Keying) signal changes over time.  The Spectrum View capability on the 4, 5 and 6 Series MSO oscilloscopes …
    Длительность: 3:16
    In this workshop, Tektronix Senior Applications engineer Alan Wolke demonstrates how to perform time correlated multi-domain signal analysis across multiple channels with the Tektronix 6 Series B …
    Длительность: 34:07
    For new engineering students, gaining a quick understanding of fundamental concepts is an important step in the learning process. This video uses plain language and clear visual examples to define …
    Длительность: 4m 31s
    Do you have trouble making accurate current or voltage measurements? Are you able to make repeatable single ended, differential, and common mode measurements? Start making reliable power …
    Длительность: 1m 25s
    The Tektronix 3 Series MDO and Keysight DSO/MSO 3000T X-Series use different techniques for making automated measurements.  The Tektronix 3 Series MDO calculates measurements and performs waveform …
    Длительность: 2m 16s
    A side-by-side comparison of the 11.6-inch HD display on the Tektronix 3 Series MDO and the 8.5-inch VGA display on the Keysight 3000T X-Series oscilloscope. The same I2C signals are shown on both …
    Длительность: 1m 7s
    See how to stabilize a hardware trigger on the up-down chirp pattern of a spread spectrum clock using a Frequency Deviation vs. Time trigger.  The Spectrum View capability on the 4, 5 and 6 Series …
    Длительность: 2:14
    Explore a collection of test and measurement tools chosen by Tektronix experts perfect for engineers working on power integrity. From measuring ripple on DC power rails to seeing noise on your …
    Длительность: 1m 26s
    After checking the gain and phase margin of a power supply control loop, observing the response of the supply to a step load change lets you watch the control loop in action. In this example, a …
    Длительность: 01:38
    Example of the use of an oscilloscope to measure Power Supply Rejection Ratio, in this case for a linear voltage regulator. Power Supply Rejection Ratio or Power Supply Ripple Rejection (PSRR) is …
    Длительность: 01:34
    Example of how to determine the EMI filter stability and the Middlebrook Criterion. The Middlebrook Criterion is a method for determining if the input filter of a switching mode power supply will …
    Длительность: 03:13
    Examples showing how to use Time Domain Reflectometry (TDR) to measure impedance and length of cables and PCB traces as well as printed circuit board dielectric constant and fault location. You …
    Длительность: 05:42
    This video shows an example of using a line injector and oscilloscope to measure frequency dependent inductance with a 1 A DC Bias current applied to the inductor. Power supplies include inductors …
    Длительность: 01:49
    Experience the 5 Series MSO, the scope that changes everything. 
    Длительность: 1m 3s
    An oscilloscope is typically set up to measure voltage versus time. But you can configure the oscilloscope to measure current as well. This video shows two very simple methods of using the …
    Длительность: 1m 32s
    See how to track down the source of transient RF/EMI emissions with Spectrum View and the RF vs Time triggering capabilities. Clearly determine which PCB signals are causing EMI emissions so that …
    Длительность: 4:21
    Aspiring electrical engineers from Queensborough Community College got an early preview of the 3 Series MDO after using an earlier generation Tek scope in their lab class.  See (and hear) their …
    Длительность: 1m 40s
    An AWG70002B was used to create a pair of 20us wide RF pulse trains at 3.85GHz. One pulse train has a constant/unchanging phase – this is our reference and is applied to Ch1. The other pulse …
    Длительность: 3m 29s
    See how an edge trigger on the RF Frequency Deviation vs Time trace isolates and captures a short duration transient in the frequency of a clock signal.  The Spectrum View capability on the 4, 5 …
    Длительность: 1:55
    Oscilloscopes are often used in educational settings, and our TBS1000C and TBS2000B oscilloscopes includes many features that come standard. Watch this video to learn about the many ways that the …
    Длительность: 1m 51s
    With its built-in 1 GHz spectrum analyzer, the 3 Series MDO oscilloscope enables RF engineers to test the latest IoT devices using sub-GHz band without adding any extra cost. The basic RF …
    Длительность: 04:25
    This Picotest video gives a quick overview of the many power-related measurements that can be made using a Tektronix oscilloscope and Picotest accessories. Advanced power supply tests, such as …
    Длительность: 1m 49s
    Example of the use of an oscilloscope and signal source to measure sub-milliohm impedance of an active power plane. Source: Arbitrary/function generator (built into 6 Series MSO) …
    Длительность: 01:39
    Testing just got easier. Whether you need a scope every day or just every now and then, it’s an affordable scope that delivers class-leading performance. The only thing it’s missing is your …
    Длительность: 42s
    Get techniques for in-system checks on Wi-Fi or other wireless modules by simultaneously viewing radio output, transceiver power supply, and RS-232 serial control bus.  Learn how to optimize …
    Длительность: 4m 28s
    Take important power supply measurements, including power quality input measurements and switching loss.  Learn important preparations, including probe deskew and current probe degauss.  See power …
    Длительность: 4m 48s
    Given the approximate frequency of EMI, these techniques will help track down the source of transient RF emissions. They employ a near-field probe with the MDO4000 integrated oscilloscope and …
    Длительность: 4m 32s
    See a few everyday examples of engineering tasks you can do with this ultimate 6-in-1 integrated instrument.
    Длительность: 6m 54s
    Watch this short video to explore some of the great features of the new 5 Series MSO oscilloscope.
    Длительность: 5m
    Watch some of the team members behind the innovative new Tektronix 5 Series MSO talk about the challenges they faced and how they overcame them.
    Длительность: 9m 5s
    A side-by-side comparison of the same waveform measurements performed on both the Tektronix MDO4000C and the Keysight X 4000A shows different results. This is because the Tektronix MDO4000C …
    Длительность: 2m 51s
    Are you seeing ALL the noise from your power rails? Lee Morgan, Technical Marketing Manager in EMEA, demos one of our power integrity setups with a 6 Series MSO, our new Power Rail Probes, and an …
    Длительность: 0h 1m 27s
    This webinar compares different methods of untethering your instrument data from your bench. Accessing your data locally and remotely is discussed, from custom Python code to automatic cloud …
    Длительность: 46m 31s
    TekDrive is a file sharing platform for storing, sharing, and collaborating on waveform and analysis data in a much more convenient, efficient, secure, and useful way. In this webinar, you will …
    Длительность: 47m
    View this recorded webinar to get a solid overview of jitter components as well as jitter characterization and visualization. Learn how to control Jitter during system design and improve timing …
    Длительность: 32m 54s
    Found in labs and workshops across a diverse range of engineering professions, modern oscilloscopes are faster, more precise and more affordable than ever. Many people new to oscilloscopes can be …
    Длительность: 46m 26s
    Watch as we demonstrate the use of digitizers having high signal integrity and software being used to reliably enable single shot and high-energy physics tests.
    Длительность: 41:56
    Webinar on applications and trends and solving problems making measurements in 5G MIMO using a scope for wideband analysis.  A demonstration shows time and frequency correlation for a power …
    Длительность: 35:33
    In this webinar, Product Manager and engineer Brandon Gould runs through 5 demonstrations of the New 5 Series B MSO oscilloscope.  This is a great, detailed overview whether you’re researching the …
    Длительность: 53:25
    What's the big deal with low noise? We talked to our engineers about how they achieved ground-breaking noise performance in the 6 Series Mixed Signal Oscilloscope.
    Длительность: 0h 6m 58s
    See what happens when you mix a brand new oscilloscope, an apps engineer, and his composite video separator. Yes, you’ll see video on the scope display. But you’ll also learn about using 16-bit …
    Длительность: 2m 39s
    Watch how easy it can be to setup and analyze waveform behavior using the highly intuitive touch interface. Setting up your measurement and debugging your system has never been easier with the …
    Длительность: 1:51
    Tektronix Sr. Applications Engineer Alan Wolke leads a workshop on practical tips and techniques for Mixed Signal Oscilloscopes using the Tektronix 6 Series B MSO. - How to remotely access your …
    Длительность: 37:32
    Learn how to get optimal results from your power supply design by checking the power supply rejection ratio. This video covers how DC-DC  converters or low voltage drop-out regulators (LDOs) …
    Длительность: 0h 8m 55s
    Learn how to annotate test results and methods with “Callouts” for easily documenting important information when sharing data across a team, recreating a measurement at a later date, or delivering …
    Длительность: 1:42
    Learn how the Wave Inspector can help you quickly set up event searches and mark all occurrences across the record.
    Длительность: 1m
    Learn how to quickly capture bursts just by drawing a couple of boxes, and how to apply logic and add more shapes to capture increasingly complex waveforms. See how visual triggers work on the 5 …
    Длительность: 4m 5s
    Get a 6-minute introduction to the Fastframe segmented memory feature on the 5 Series MSO. FastFrame enables high-quality data with the efficient use of memory. Learn how to get off the ground …
    Длительность: 6m 7s
    Cursors provide a quick method for making manual measurements. Here's how to use them.
    Длительность: 58s
    The 5 Series MSO contains many built-in demo examples. Here are just a few of them.
    Длительность: 39s
    Learn how to quickly trigger and decode serial busses.
    Длительность: 41s
    The FastAcq feature provides a quick method of finding even the most elusive signal events.
    Длительность: 101717 - 0:39
    Learn how to use the eScope function to remotely control a Tektronix oscilloscope over a network without any special software. This video shows how to find the IP address of the scope and use a …
    Длительность: 2:14
    Watch how to easily change the font size used on your 4/5/6 Series MSO with just a few clicks. This will make it easier to read measurement values at a distance from your scope or maximize the …
    Длительность: 1:27
    This video demonstrates how to update the firmware on the 5 Series MSO.
    Длительность: 2m 29s
    Automated measurements provide quick, precise insights with a simple drag-and-drop.
    Длительность: 41s
    Learn how fast waveform update rates help uncover intermittent signal anomalies, and advanced triggering and search techniques can determine how often they occur.   For more information on the new …
    Длительность: 2m 6s
    Learn how to configure and get started with SignalVu-PC software and 5 and 6 Series MSOs for vector signal analysis.
    Длительность: 2:42
    See how Spectrum View provides ease-of-use and the ability to achieve optimal views in both RF and Time domains simultaneously when analyzing the turn on behavior of a spread spectrum clock.  This …
    Длительность: 2:32
    Find the most comprehensive solution available for PAM4 analysis. Find out about the advanced equalization and digital clock recovery, effective error rate analysis, and offline analysis available …
    Длительность: 1m 51s
    If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels …
    Длительность: 0h 6m 0s
    During the design and validation of systems that utilize 3 Phase power, it can be difficult to correlate control systems and power electronics with the performance of the overall system. Watch how …
    Длительность: 2:45
    A side-by-side comparison of the Tektronix MDO4000C and the Keysight 4000 X-Series for one of the most common debug tasks: automated search.
    Длительность: 2m 33s
    This is a side-by-side comparison of the Visual Trigger option on the Tektronix MSO/DPO5000 Series and Zone Triggering on the Agilent DSO-X 4000A Series oscilloscopes.  Find out how MSO/DPO5000 …
    Длительность: 3m 30s
    This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes, focusing on the search and measurement functionality of each instrument for …
    Длительность: 6m 15s
    This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes.  The capabilities of each oscilloscope are evaluated as we walk through the …
    Длительность: 5m 24s
    This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Agilent 9000H.
    Длительность: 7m 13s
    This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Teledyne LeCroy HDO4000.
    Длительность: 5m 27s
    This short video shows how to debug a compliance measurement that has failed by using Tektronix’ Jitter and Eye Diagram Software, DPOJET. Using DPOJET, engineers can go from a compliance …
    Длительность: 4m 36s
    TekScope PC software, combined with Tektronix oscilloscopes, makes it easy to log waveform data, waveform images and measurements on your PC.  Simply set the logging interval, count, and hit Start …
    Длительность: 5m 29s
    See how you can use TDR (Time Domain Reflectometry) techniques to better understand power integrity issues and more quickly eliminate issues, like ripple, from your system designs.
    Длительность: 25:29
    Learn how using TekScope software together with entry-level  oscilloscopes enables far greater insight into the data captured and far more powerful analysis and sharing capabilities than might be …
    Длительность: 21:00
    See how Spectrum View's triggering functionality can be used together with the independent control of time and frequency domains to capture infrequent anomalies.  Additional videos: Spectrum View …
    Длительность: 7:19
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length. This enables their Spectrum …
    Длительность: 3:35
    For complex troubleshooting, Spectrum View is available on multiple channels.  With all Spectrum Time indicators locked and moving together you can see time correlated spectrums across all …
    Длительность: 4:56
    This video shows how to set up automated SENT bus (also known as SAE J2716) decoding, triggering, and search on the 5 Series MSO mixed signal oscilloscope.
    Длительность: 2m 57s
    Measuring a small signal imposed on a much larger one requires enough vertical scale to capture the large signal, and enough resolution to see the small one.  This video shows some best practices …
    Длительность: 8m 21s
    See how the pre-compensation feature found on Tektronix Arbitrary Waveform Generators can correct for the negative effects of cables, components, and fixtures on the amplitude and phase of high …
    Длительность: 6:05
    See how the 4, 5, and 6B Series of MSO oscilloscopes provide a platform for multichannel test and measurement of MIMO systems through extension of MATLAB® algorithms for analysis of channel …
    Длительность: 24:54
    Get tips on measuring sub-milliohm impedance on a board at low frequencies across surface mount capacitors. See how this VNA measurement is made using a Tektronix 6B Series MSO oscilloscope …
    Длительность: 15:36
    See how a 6 Series B MSO can display a decoded serial bus, analog waveforms, and digital timing information for a rich view of your systems. This video shows a decoded SPI bus.   For more …
    Длительность: 2:06
    This demonstration shows the very quick jitter summary on the 6 Series B MSO, which includes an eye diagram, TIE histogram and spectrum, and bathtub plot.   For more information on the new 6 …
    Длительность: 01:58
    Test automation may be used to check automotive Ethernet transmitters for compliance with the BroadR-Reach, 100BASE-T1 (P802.3bw), and 1000BASE-T1 (802.3bp) standards. This demonstration shows the …
    Длительность: 0h 4m 52s
    This demonstration shows the clean capture of a small detail with extremely low noise, even on a signal that spans hundreds of volts.   For more information on the new 6 Series B MSO visit here.
    Длительность: 01:54
    Watch this demonstration showing how the 6 Series B MSO oscilloscope offers the industry’s best solution for debugging with the ability to optimize fully correlated RF (spectrum) and time-domain …
    Длительность: 4:38
    Learn how to perform multi-domain signal analysis of 5G base station and user equipment systems.  See the benefits of using a mixed domain oscilloscope for analyzing RF amplifier performance.  …
    Длительность: 6:47
    Watch to learn how you can simplify several 3GPP 5G New Radio transmitter tests. You’ll see how to verify transmitter characteristics including power, power dynamics, signal quality and RF …
    Длительность: 8:50
    See how MIMO analysis of RF, analog and digital can be performed simultaneously for easy analysis and correlation between both the frequency and time domain while addressing the unmet needs of the …
    Длительность: 51:53
    Get an overview of the 3 Series MDO.  See how to operate the controls -- after the first 3 minutes you'll know everything you need to know to be able to operate the instrument.  Learn about making …
    Длительность: 13m 34s
    The 3 Series MDO offers impressive specifications and supports powerful measurement tools.   See how to make cursor measurements and automated measurements like peak-to-peak voltage,  period, and …
    Длительность: 2m 48s
    The 3 Series MDO is a versatile addition to any bench.  Find out how digital channels can expand your visibility into your designs. Learn about the built-in spectrum analyzer options.  See serial …
    Длительность: 5m 39s
    Learn how the 1 GHz or 3 GHz built-in spectrum analyzers available in the 3 Series MDO can take the place of a stand-alone spectrum analyzer.  Learn about specifications, markers, spectrogram …
    Длительность: 3m 0s
    In just a few minutes you'll learn everything you need to know to be able to operate the 3 Series MDO.  You'll get a guided tour of the high-definition display, learn how to use the touchscreen to …
    Длительность: 2m 37s
    This video shows how the MDO4000B linked to SignalVu-PC can be used to debug and test the integration of a WLAN module in an embedded design. The MDO4000B multi-domain capability helps with the …
    Длительность: 8m 32s
    Learn how a modern oscilloscope can provide six different capabilities: 1)Oscilloscope; 2) Spectrum Analyzer; 3) Protocol Analyzer; 4) Logic Analyzer; 5) AFG; 6) DVM/counter.
    Длительность: 21:35
    Discover the benefits of seeing your analog, digital, and RF signals time-correlated on one display. Whether you’re integrating Bluetooth, Zigbee or other wireless technologies in your design …
    Длительность: 4m 26s
    Discover how to use a Tektronix MSO5000B Series Oscilloscope to validate the operation of a High-Speed USB serial bus, using the SR-USB option.
    Длительность: 6m 19s
    Sometimes bad things happen to good scopes!  Ensure you've got it covered with a Total Product Protection plan from Tektronix, the only coverage plan available for test equipment with accident …
    Длительность: 1m 2s
    The MDO4000C offers the functions of a high-performance mainstream oscilloscope with the flexibility to add a spectrum analyzer, arbitrary / function generator, a logic analyzer, a protocol …
    Длительность: 2m 50s
    Generate a Wide Range of Signals with the Integrated Arbitrary/Function Generator.
    Длительность: 2m 31s
    The MDO3000 Mixed Domain Oscilloscope features six integrated instruments, including a spectrum analyzer, function generator and more, giving you the ability to capture analog, digital and RF …
    Длительность: 56s
    Uncover Noise Sources and Debug Wireless with the Integrated Spectrum Analyzer.
    Длительность: 3m
    Discover the exceptionally wide capture bandwidth of the integrated spectrum analyzer found in the MDO3000 Series Mixed Domain Oscilloscope.
    Длительность: 3m 24s
    Monitor More of Your Design with the Integrated Logic Analyzer.
    Длительность: 2m 48s
    Debug Your Serial Buses in Seconds with the Integrated Protocol Analyzer.
    Длительность: 2m 58s
    Perform Quick Measurements with the Integrated Digital Voltmeter.
    Длительность: 1m 50s
    Find Elusive Signal Problems with the MDO3000 Mixed Domain Oscilloscope.
    Длительность: 2m 39s
    This video looks at how to minimize power losses at the component level and optimize the overall efficiency of a power system. The primary causes of power loss in a power system are the power …
    Длительность: 1m 51s
    Testing power quality is a critical part of any power design process. In this video, our Tektronix expert shares tips and tricks for using an oscilloscopes or power analyzer during design and …
    Длительность: 2:55
    This quick demonstration shows in real-time how phase relationships change based on the relative position of antennas. The phase-coherent digital downconverters (DDCs) in a 6 Series MSO …
    Длительность: 2:09
    Watch this video to learn about the new features in TekScope version 1.40, including continuous acquisition, license expiration notification, and IMDA-MECH and WBG-DPT in the pro automotive and …
    Длительность: 7m 19s
    Example of how to measure 2-Port shunt impedance on your (Voltage Regulator Module) VRM. Power plane impedance is the most common power integrity assessment, and the 2-port shunt through method is …
    Длительность: 01:48