Why do I get a flat line signal in Vectorscope Display Mode when I apply a 75% or 100% Color Bar Composite Video signal to Channel 1 of my TDS3000 series scope with TDS3VID or TDS3SDI Video module?

질문:

답변:

The TDS3VID, or TDS3SDI Vectorscope feature only supports Component Video signals. You must apply a Color Difference Component Analog Video signal, for example; Y,Pb,Pr to two input channels on the TDS3000/B Scope which uses XY mode to produce the Vectorscope display.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈: TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued)

제품:

FAQ ID 59016

모든 FAQ 보기 »