연락처
텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능
전화
전화 문의
9:00am-6:00PM KST에 이용 가능
다운로드
매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.
피드백
제품 지원 및 다운로드
텍트로닉스 제품 지원 센터
'텍크놀로지(Tek-nology)'를 개발하는 일은 행복하지만, 동시에 매우 바쁘다는 걸 알고 있습니다. 이에. 텍트로닉스는 현재 출시되는 모든 제품과 단종된 여러 제품에 대한 설명서와 데이터 시트, 소프트웨어를 쉽게 다운로드할 수 있도록 제품 지원 센터를 만들었습니다. 사용 중인 제품명을 입력해 주시기만 하면 텍스로닉스가 보유하고 있는 모든 정보를 알려 드리겠습니다.
선택한 제품 모델은 현재 구입할 수 있으며, 다음 지원 정보도 제공됩니다.
-
데이터 시트 참고자료 번호: 릴리즈 날짜 패시브 1x/10x 전압 프로브
51K-17984-3 THP0301 시리즈 패시브 10x 전압 프로브
3GK-27122-3 TPP0051 Probe Datasheet
51W-30155-0 500MHz 패시브 프로브
P6139B 및 P5050B 프로브는 입력 저항이 10MΩ인 고대역, 고임피던스 10X 패시브 전압 프로브입니다. 이러한 프로브는 작은 프로브 헤드가 있고 팁이 뾰족해 조밀한 회로를 더 손쉽게 탐침할 수 있습니다. P6139B와 P5050B는 전기 사양이 유사하지만 보정 범위가 각기 다른 텍트로닉스 오실로스코프를 지원합니다. kr.tek.co/probes에 위치한 오실로스코프 프로브 및 액세서리 선택 도구를 참조해 사용 중인 …51K-26150-5 패시브 10X 전압 프로브
TPP0100 및 TPP0101 프로브는 10MΩ 입력 저항을 포함한 100MHz, 10X 패시브 전압 프로브입니다.51K-25690-3 패시브 전압 프로브
TPP1000, TPP0500B, TPP0502 및 TPP0250 모델은 이전에 이 제품 등급에서 제공하지 못했던 획기적인 사양을 제공하는, 텍트로닉스의 고대역폭, 범용 프로브입니다. 텍트로닉스 MDO3000, MDO4000, MSO/DPO5000 및 5 시리즈 MSO 시리즈 오실로스코프와 함께 사용하도록 설계된 이 프로브는 최대 1GHz의 아날로그 대역폭과 함께 3.9pF 미만의 용량 부하를 제공합니다.51K-26151-9 패시브 10X 전압 프로브
TPP0200 및 TPP0201 프로브는 10MΩ 입력 저항을 포함한 200MHz, 10X 패시브 전압 프로브입니다.51K-25681-3 Passive Voltage Probes
51W-26153-3
-
매뉴얼 매뉴얼 유형 부품 번호: 릴리즈 날짜 Tektronix Supplemental
Product Information Sheet for People's Republic of China Other사용자 071329402 Tektronix Supplemental
Product Information Sheet for People's Republic of China Other사용자 071296603 TPH1000
Probe Holder Instructions주 사용자 071289400 TPP0100 & TPP0200 Series
100 and 200 MHz 10X Passive Probes Instructions주 사용자 071278600 P2221
200 MHz 1X/10X Passive Probe Instructions사용자 071233500 P2220 200 MHz 1X/10X Passive Probe
1X/10X MHz Passive Probe Instructions주 사용자 071146400 P2220 Probe Safety Warning Sheet
1X/10X MHz Passive Probe Other사용자 063380400 P6101B Instructions
15 MHz 1X Passive Probe Instructions통합 사용자/서비스 070781907 P3010 100 MHz 10X Passive Probe With Readout
100 MHz 10X Passive Probe With Readout Instructions주 사용자 071046600 P6111B 200 MHz 10X Passive Probe w/Readout
200 MHz 10X Passive Probe With Readout Instructions주 사용자 070854305 Probes and Accessories Declassification and Security Instructions
Declassification and Security기밀 해제 071238400 TPP0250 and TPP0500B Instructions
250 MHz & 500 MHz 10X Passive Probes주 사용자 071316404 P6139B and P5050B Instructions
500 MHz 10X Passive Probes주 사용자 071271001 TPH1000 Probe Holder Instructions
Probe Holder사용자 071289401 TPP0502
500 MHz 2X Passive Probe주 사용자 071288304 TPP1000
1GHz Probe주 사용자 071280904 Power Measurement Deskew & Calibration Fixture Instructions
067-1686-03주 사용자 071187203 Tektronix Supplemental, 071329404
Product Information Sheet for People‚s Republic of China사용자 071329404 Tektronix Supplemental, 071296605
Product Information Sheet for People‚s Republic of China사용자 071296605
-
기술 문서 문서 유형 릴리즈 날짜 2014 Bench Products Catalog
To complement our oscilloscopes, we offer a portfolio of bench instruments designed with the same ease-of-use you've come to expect from us over the last 60 years. From dedicated buttons for common functions to USB ports for saving data. Our …제품 선택 가이드 How Oscilloscope Probes Affect Your Measurement
This application note describes how an oscilloscope probe changes the signal you’re measuring at the test point and whatprobing specifications to look for to minimize probing effects. One measurement trap often overlooked are the effects of probe …애플리케이션 노트 프로브 기초 입문서
프로브는 오실로스코프 측정의 핵심이며 측정 품질에 중요한 영향을 미칩니다. 60페이지 분량의 이 입문서에는 프로브의 다양한 유형과 장점부터 고급 프로브 기법에 이르는 전자 엔지니어링 입문자들이 프로브에 대해 알아야 할 모든 내용이 설명되어 있습니다.입문서 장비 최대한활용하기
텍트로닉스 오실로스코프 소프트웨어,프로브 및 악세사리를 사용하면 오실로스코프를 특정 애플리케이션 요구사항 및 환경에 맞출 수 있습니다.제품 선택 가이드 Probing High Frequency Digital Circuitry
기술 브리프(Brief) ABCs of Probes Primer
Learn about the fundamentals of probes and discover how to choose the right probe for your oscilloscope and get reliable measurements every time in this comprehensive ABCs of Probes primer. *Download the PDF for the most recent UPDATED version of …백서 How to Minimize Probe Loading with Low Capacitance Probes
Probing a circuit always has some impact on signals. Probe loading changes the signal being probed and can cause measurement problems or can even cause a circuit to perform differently. Reducing capacitive loading can help minimize these effects. In …애플리케이션 노트
-
FAQ FAQ ID When using my TPP0250, TPP0500, TPP1000, or TPP0500B probe, the signal disappears or is intermittant. What could be causing this?
The internal probe tip may have come loose and is causing the loss or intermittency of the signal. The probe tip might also be damaged. How to check: Pull off probe tip. Unscrew black insulation sleeve (item 2). Look at inner probe tip that is …69511 What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A.From a mechanical perspective, there are some differences:- Sharper tip- Ground …64441 Is there a shorter ground connection for the P2220 probe than the 6" one that comes with it?
Yes, it uses the same accessories as the P61xxB family of 5mm probes, so there is a 3" grounding lead set consisting of the 175-0849-00 (3" wire and clip) and the 344-0046-01 (alligator clip).62001 What is the p/n of the replacment body shell for my P6139B probe? See arrow below:
The replacment p/n for this part is 204122600.64741 What Is The Difference Between The P2220 And P2221?
The only difference between the P2220 and the P2221 is the compensation range.P2220: 15 to 25 pFP2221: 10 to 25 pFThe P2221 will always work as a replacement for the P2220 but the P2220 will not always work as a replacement for the P2221. For example …60081 What is the maximum floating voltage for a single-ended probe?
A single-ended probe is a ground-referenced probe. The alligator clip connected to the side of the probe is a ground reference. This allows the scope and device under test have a common reference to ground. Typically, a single-ended probe should only …246196 Where can I find a list of passive probe accessories such as surface mount interconnects+ circuit board test points+ and replacement parts?
The accessories will depend upon which type of passive probe. There are three probe diameters: 2.5 mm, 3.5 mm, and 5 mm. The part numbers and a diagram of the accessories for each type can be found below:2.5 mm (subminiature) probe accessories for …58961 Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …56226 I have a probe that is no longer being manufactured. What is the replacement?
Please use our "Interactive Probe Selection Tool" to assist in locating a replacement probe for your Tektronix instrument. The interactive tool is located at /node/3661. If your instrument is not located in the upper instrument list, you can click …52846 What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …56016 Are there accessories for the P2220 Probe? None are listed in the manual.
Yes, the accessories that fit the P61XXB probe family will fit this 5mm probe also. Here is the link: http://www2.tek.com/cmswpt/psdetails.lotr?ct=PS&ci=13523&cs=psu&lc=EN Click on the diagram itself for an enlarged view.61486 I need a very close ground connection to reduce ringing on my P3010 probe for my TDS3014 scope.
The bayonnet adapter is the shortest ground connection. Part number 013-0085-01. It works onall 5mm probes.63706 Does the P2220 probe replace the P2200 probe?
Yes. The P2220 probe is compatible with TDS1000 and TDS2000 Series as well as the TPS2000 Series. The P2200 probe and other standard single-ended passive probes cannot be used with the TPS2000 Series because safe operation of the TPS2000 Series …58196 The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …58571 Can the P6139B be used on scopes that shipped with a P6139A? What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A. From a mechanical perspective, there are some differences: - Sharper tip …58111
