| User Interface | |
Tektronix PA1000
 |
Zimmer LMG95
|
| Analysis Features & Test Solutions | |
|
Tektronix PA1000 ✔ Harmonics Analysis – included standard, to 50th harmonic ✔ DUAL current shunts – 20Amp and 1Amp for low current accuracy ✔ PC Software (PWRVIEW) – with setup wizards & test automation ✔ Standards Compliance – Full Compliance for Standby Power per IEC62301 standard |
Zimmer LMG95 ✔ Harmonics Analysis – included, to 40th harmonic ✗ Single 20 Amp shunt ✗ PC Software – all application SW is optional / extra-cost ✗ Standards Compliance – Compliance test SW for Standby Power is extra cost |
| Standard & Optional Features: Value Proposition | |
|
Tektronix PA1000 (with included PWRVIEW software) Included in base product: Instrument with 1MHz bandwidth ✔ Current ranges for measurement from 40µA to 20Arms✔ Data logging to front panel USB flash drive ✔ Data logging to PC running PWRVIEW ✔ Remote PA1000 control from PC running PWRVIEW ✔ Full Compliance Test for IEC62301 Standby Pwr |
Zimmer LMG95 Included in base product: Instrument with 50kHz bandwidth + Bandwidth to 500kHz (Option L95-06-1)+ Current range extended below 150mA (Option L95-08-x) for low current measurements + Add comm ports (RS-232,GPIB) (Option L95-01) (Note: LAN not available, USB not available) Optional Software: + Software TERM-L5 (config & data logging)+ Software NDL5 (autonomous data logging without PC; requires TERM-L5) + Software “CE-Test-Standby” |