Question :
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
Réponses :
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.
Equipment list:
- Windows 7 oscilloscope with firmware version 6.4 or later
- MATLAB with the Instrument Control Toolbox or any other toolboxes you will use (e.g. Signal Processing Toolbox).
This example will show you how to update a txt file using the Application Development Kit (ADK) with values for your cutoff frequency. Then using a custom MATLAB filter file it will read in the values from this txt file and apply the appropriate butter worth 3rd order filter with corresponding cutoff frequencies.
Cette FAQ concerne :
Série du produit : DPO7000 Oscilloscopes au phosphore numérique et à signaux mixtes MSO/DPO70000DX Oscilloscope à signaux mixtes MSO/DPO2000B
Produit :
Numéro de la FAQ 64766
Afficher toutes les FAQ »