Serial Triggering and Analysis

I²C Sources

(Clock and Data)

Analog channels

Digital channels

Active Math channels ¹

Active Reference channels¹

Hex

Binary

Start

Repeated Start

Stop

Missing Ack

Address (7 or 10 bit)

Data (1-5 bytes)

Address and Data

Start (green bar)

Address (yellow packet)

Data (cyan packet)

Missing Ack (! symbol in red box)

Stop (red bar)

(Clock, Data, and Slave Select)

Analog channels

Digital channels

Active Math channels¹

Active Reference channels¹

Framing

Clock

Slave Select

Data

Word Size

Bit Order

Slave Select (3-wire SPI), Idle Time (2-wire SPI)

Rising or Falling Edge

Active High or Active Low

Active High or Active Low

4 - 32 bits

Most Significant (MS) First, Least Significant (LS) First

Hex

Binary

SS Active (3-wire SPI)

Start of Frame (2-wire SPI)

Data (1-16 bytes)

Start (green bar)

Data (cyan packet)

Stop (red bar)

I3C Sources

(Clock and Data)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds

Speed

High Speed (480 Mb/s)

Full Speed (12 Mb/s)

Low Speed (1.5 Mb/s)

Recommended Probing

Formats Available

Hex

Binary

Mixed Hex

1.0

1.1

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Search On

Start

Repeated Start

Address

Data

I3C SDR Direct Message

I3C SDR Broadcast Message

I3C DDR Message

Errors

Hot-Join

Direct Message End

Stop

HDR Restart

HDR Exit

Start (green bar)

Address (yellow packet)

Commands (cyan packet)

Data (cyan packet)

Parity (purple packet)

Stop (red bar)

• Select the I3C bus on which to trigger.
• Trigger On Select the type of information on which to trigger.

• Start
• Repeated Start
• Address
• Data
• I3C SDR Direct
• I3C SDR Broadcast
• Hot join
• Errors
• HDR Exit
• HRD Restart
• Stop
• Slave Reset Pattern

Analog channels

Digital channels

Active Math channels¹

Active Reference channels¹

Analog channels

Active Math channels¹

Active Reference channels¹

Normal (RS-232)

Inverted (UART, RS-422, RS-485)

None

Odd

Even

Hex

Binary

ASCII

Packet View

Start

End of Packet

Data (1 - 10 bytes)

Parity Error

For 3 Series MDO: Up to 10 Mb/s

1,200 b/s

2,400 b/s

9,600 b/s

19,200 b/s

38,400 b/s

115,200 b/s

921,600 b/s

Custom (All but 3 Series MDO: 50 b/s - 15 Mb/s

Custom (for 3 Series MDO): 50 b/s - 10 Mb/s

Start (green packet)

Data (cyan packet)

Parity (purple packet)

Parity Error (red packet)

Analog channels

Digital channels

Active Math channels¹

Active Reference channels¹

(differential probing)

Analog channels

Active Math channels¹

Active Reference channels¹

CAN_H, CAN_L, Rx, Tx

Diff

Single-ended

Differential

Predefined list of rates

Custom

10 kb/s - 1 Mb/s

All but 3 Series MDO: 1 kb/s - 1 Mb/s

3 Series MDO: 10 kb/s - 1 Mb/s

All but 3 Series MDO: 0% - 100% of bit period of unit interval

3 Series MDO: 5% - 95% of bit period of unit interval

Mixed Hex

Hex

Binary

Symbolic (.dbc)¹

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Trigger and/or Search On

Start of Frame

Type of Frame (Data, Remote, Error, Overload)

Identifier (Standard or Extended)

Data (number of bytes 1-8, trigger or search when =, ≠, <, ≤, >, ≥)

Identifier and Data

EOF

Missing Ack

Bit Stuff Error

Message

As defined by the .dbc file¹

Message and Signal

As defined by the .dbc file¹

Start of Frame (green bar)

Identifier (yellow packet)

Data Length Control (purple packet)

Data (cyan packet)

CRC (purple packet)

End of Frame (red bar)

Errors (red packet)

(Single-ended probing)

Digital channels

Active Math channels

Active Reference channels

(Differential probing)

Active Math channels

Active Reference channels

Diff

Differential

Custom

50 kb/s - 1 Mb/s

Custom

500 kb/s - 20 Mb/s

Hex

Binary

End of Error

Type of Frame (XL Data Frame)

Priority Identifier

Data (1 byte)

XL Bits (Acceptance Field, Virtual CAN Network ID, SDU Type, Simple Extended Content, Stuff Bit Count, Arbitration to Data Sequence, Data to Arbitration Sequence)

ADS Type (Arbitration to Data High Bit, Data High Bit 1, Data High Bit 2, Data Low Bit)

DAS Type (DAH, Active High 1, Active High 2, Active Low 1)

End of Frame

Error (Missing Ack, XL Form Error, CRC, Any Error)

CRC Type (PCRC, FCRC)

Priority Identifier (cyan packet)

Remote Request Substitute (cyan packet)

FD Format Indicator (cyan packet)

XL Format Indicator (cyan packet)

Reserved Bit XL Format (cyan packet)

XL Bits (cyan packet)

Data Length Control (purple packet)

PCRC (purple packet)

Data (cyan packet)

FCRC (purple packet)

FCP (purple packet)

Ack (cyan packet)

Ack Delimiter (cyan packet)

End of Frame (Dark pink packet)

Errors (red packet)

Type of Frame (XL Data Frame)

Priority Identifier

Data (1 byte)

XL Bits (Acceptance Field, Virtual CAN Network ID, SDU Type, Simple Extended Content, Stuff Bit Count, Arbitration to Data Sequence, Data to Arbitration Sequence)

ADS Type (Arbitration to Data High Bit, Data High Bit 1, Data High Bit 2, Data Low Bit)

DAS Type (DAH, Active High 1, Active High 2, Active Low 1)

End of Frame

Error (Missing Ack, XL Form Error, CRC, Any Error)

CRC Type (PCRC, FCRC)

(single-ended probing)

Digital channels

Active Math channels¹

Active Reference channels¹

(differential probing)

Active Math channels¹

Active Reference channels¹

CAN_H, CAN_L, Rx, or Tx

Differential

non-ISO

Predefined list of rates

Custom

10 kb/s - 1 Mb/s

All but 3 Series MDO: 50 kb/s - 10 Mb/s

3 Series MDO: 10 kb/s - 1 Mb/s

FD Bit Rate Selection:

Predefined list of rates

Custom

All but 3 Series MDO: 1 Mb/s - 16 Mb/s

3 Series MDO: 1 Mb/s - 7 Mb/s

All but 3 Series MDO: 500 kb/s - 16 Mb/s

3 Series MDO: 500 kb/s - 7 Mb/s

Sample Point

All but 3 Series MDO: 55% - 95% of bit period of unit interval

3 Series MDO: 15% - 95% of bit period of unit interval

Formats Available

Hex

Binary

Symbolic (.dbc)¹

Trigger and/or Search On

Type of Frame (Data, Remote, Error, Overload)

FD Bits (Bit Rate Switch bit, Error State Indicator bit)

Identifier (Standard or Extended)

Data (1-8 bytes, trigger or search when =, ≠, <, ≤, >, ≥)

Identifier and Data

End of Frame

Error (Missing Ack, Bit Stuffing Error, FD Form Error, Any Error)

Identifier (yellow packet)

Data Length Control (purple packet)

Data (cyan packet)

CRC (purple packet)

End of Frame (red bar)

Errors (red packet)

Analog channels

Digital channels

Active Math channels¹

Active Reference channels¹

Normal

Inverted

Predefined list of rates

Custom

1.2 kb/s - 19.2 kb/s

All but 3 Series MDO: 1 kb/s - 100 kb/s

3 Series MDO: 800 b/s - 100 kb/s

All but 3 Series MDO: 0% - 100% of bit period of unit interval

3 Series MDO: 10% - 90% of bit period of unit interval

V 1.x

V 2.x

Both

Yes

No

Hex

Binary

Mixed

Sync

Identifier

Data (number of bytes 1-8, trigger or search when =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

ID and Data

Wakeup Frame

Sleep Frame

Error (Sync, ID Parity, Checksum)

Start of Frame (green bar)

Sync

Identifier (yellow packet)

Data (cyan packet)

CRC (purple packet)

Errors (red packet)

Active Math channels¹

Active Reference channels¹

Analog channels

Digital channels

Active Math channels¹

Active Reference channels¹

Analog channels

Digital channels

Active Math channels¹

Active Reference channels¹

Bdiff

BP, BM (analog channels)

BP, BM (digital channels)

Tx, Rx

High and Low thresholds

High and Low thresholds

Single threshold

Single threshold

Bdiff, BP, BM

Tx, Rx

Differential

Single-ended

A

B

Predefined list of rates

Custom

2.5 Mb/s, 5 Mb/s, 10 Mb/s

1 Mb/s - 10 Mb/s

Hex

Binary

Mixed Hex (Decimal: ID, Len, and Count; Hex: Data and CRCs)

Indicator Bits (Normal, Payload, Null, Sync, Startup)

Cycle Count (when =, ≠, <, ≤, >, ≥)

Header Fields (Indicator Bits, Identifier, Payload Length, Header CRC, and Cycle Count)

Identifier (when =, ≠, <, ≤, >, ≥)

Data (when =, ≠, <, >, ≤, ≥)

Identifier and Data

End Of Frame (Static, Dynamic)

Error (Header CRC, Trailer CRC, NULL Frame in Static, NULL Frame in Dynamic, Sync Frame in Dynamic, Start Frame No Sync)

Start (green bracket)

Frame ID (yellow box)

Payload Length (purple box)

Headers (purple box)

Cycle Count (yellow box)

Data (cyan box)

CRC, DTS, CID (purple box)

Stop (red bracket)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Normal

Inverted

(1 Fast Data Channel)

(2 Fast Data Channels)

Yes

No

None

Enhanced w/ 4-bit ID

Enhanced w/ 8-bit ID

Short

Mixed Hex

Binary

Hex

Mixed Decimal

Start of Packet

Fast Channel(s) (Status/Communication, Data)

Slow Channel (Message ID, Data)

CRC Error (Fast channel, Slow channel)

Start of Packet

Fast Channel(s) (Status/Communication, Data)

Slow Channel (Message ID, Data)

Pause Pulse (Number of Ticks)

Error (Frame Length, Fast channel CRC, Slow channel CRC)

Sync (green packet)

Fast Channel Status (purple packet)

Slow Channel Message ID (yellow packet)

Data (cyan packet)

CRC (purple packet)

Pause (purple packet)

Errors (red packet)

Analog channels

Active Math channels

Active Reference channels

Normal

Inverted

Single-ended: Per-channel thresholds

Differential: High and low thresholds

Mixed Hex

Mixed ASCII

Hex

Binary

Sync

Command (Transmit/Receive Bit, Parity, Subaddress / Mode, Word Count / Mode Count, and RT Address =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Status (Parity,

Bit 9 - Message Error,

Bit 10 - Instrumentation,

Bit 11 - Service Request,

Bit 15 - Broadcast Command Received,

Bit 16 - Busy,

Bit 17 - Subsystem Flag,

Bit 18 - Dynamic Bus Control Acceptance,

Bit 19 - Terminal Flag,

and Data =, ≠, <, ≤, >, ≥,

Inside Range, Outside Range)

Data (Parity, and Data =, ≠, <, ≤, >, ≥,

Inside Range, Outside Range)

Time (RT / IMG) (> Maximum, < Minimum, Inside range, Outside Range)

Error (Parity Error, Sync Error, Manchester Error (trigger only), Non-contiguous Data)

Start (green bar)

Sync (purple packet with Word Type identified)

Address (yellow packet)

R/T (purple packet)

Word Count (purple packet)

Data (cyan packet)

Parity (purple packet)

Errors (red packet)

Stop (red bar)

Analog channels

Active Math channels

Active Reference channels

Differential

Normal

Inverted

High and low thresholds

Differential

Bit Rate Selection:

Predefined list of rates

Custom

12.5 kb/s, 100 kb/s

10 kb/s - 1 Mb/s

Data (19 bits)

SDI+Data (21 bits)

SDI+Data+SSM (23 bits)

Mixed Hex

Hex

Binary

Word Start

Label (when =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Data (when =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Label and Data (Label value and Data =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Word End

Error (Any Error, Parity Error, Word Error, Gap Error)

Start (green bracket)

Label (yellow box)

Source Destination Identifier (yellow box)

Data (cyan box)

Sign/Status Matrix (purple box)

Parity (purple box)

Stop (red bracket)

Error (red box)

Audio Sources (Bit Clock, Word Select, Data)

Analog channels

Digital channels

Active Math channels¹

Active Reference channels¹

Thresholds

Per-channel thresholds

Bit Clock Polarity

Rising Edge

Falling Edge

Word Select Polarity

Normal

Invert

Data Polarity

Active High

Active Low

Word Size

4 - 32 bits

Formats Available

Hex

Binary

Signed Decimal

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Trigger and/or Search On

Word Select (I²S, LJ, RJ only)

Frame Sync (TDM only)

Data (when =, ≠, <, >, ≤, ≥, Inside Range, Outside Range; Left, Right, or Either Word)

Maximum Clock/Data Rate

All but 3 Series MDO: Up to 10 Mb/s (for automated decoding of bus)

3 Series MDO: Up to 12.5 Mb/s (for automated decoding of I2S/LJ/RJ bus)

3 Series MDO: Up to 25 Mb/s (for automated decoding of TDM bus)

Decode Display

Left Channel Data (I²S, LJ, RJ) (yellow box)

Right Channel Data (I²S, LJ, RJ) (cyan box)

Channel 1 Data (TDM) (yellow box)

Channel 2 - N Data (TDM) (cyan box)

Digital channels (single-ended)

Active Math channels

Active Reference channels

USB 1.1 (12 Mbps)

USB 2.0 (480 Mbps)

USB 2.0

Differential

Hex

Binary

Mixed ASCII

Reset

Suspend

Resume

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (USB 2.0 only)

Special Packet: PRE (USB 1.1 only), ERR, SPLIT, PING, Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (USB 1.0 and USB 1.1 only)

Reset

Suspend

Resume

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (USB 2.0 only)

Special Packet: PRE (USB 1.1 only), ERR, SPLIT, PING, Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (USB 1.0 and USB 1.1 only)

Sync (green packet)

PID (yellow packet)

Token (address) (yellow packet)

Data (cyan packet)

CRC (purple packet)

Error (red packet)

End of packet (red bar)

Digital channels

Active Math channels

Active Reference channels

USB 1.1 (12 Mbps)

USB 2.0 (480 Mbps)

USB 3.0 (5 Gbps)

USB 3.1 Gen 1 (5 Gbps)

USB 3.2 Gen 1 (5 Gbps)

Binary

Mixed Hex

Mixed ASCII

Binary

Mixed Hex

Off

• Ordered Set: TSEQ, TS1, TS2, SKP, DPPSTART, DPPEND, DPPABORT, LCSTART, HPSTART
• LMP: Port Capability, Port Configuration, Port Configuration Response, Precision Time Management, Set Link Function, U2 Inactivity Timeout, Vendor Device Test, ANY
• TP: ACK, DEV Notification, ERDY, NRDY, PING, PING Response, STATUS, STALL, ANY
• Packet Type: LMP, TP, DP, ITP, ANY
• Error: CRC5, CRC16, CRC32

Packet View Off Only

• Ordered Set: TSEQ, TS1, TS2, SKP
• Compliance Pattern: CP0, CP1, CP2, CP3, CP4, CP5/6, CP7/8
• Custom
• Error: Character, Disparity

Control Character: COM, EDB, END, EPF, SDP, SHP, SKP, SLC, SUB, Any

Ethernet Source(s)

Analog channels

Active Math channels

Active Reference channels

Thresholds

Per-channel thresholds

Speed

10BASE-T

100BASE-TX

Recommended Probing

Differential

Formats Available

Mixed Hex

Hex

Binary

Mixed ASCII

Bus

Bus and Waveforms

Results Table

Trigger On

Start Frame Delimiter

MAC Addresses

Q-Tag Control Information

MAC Length/Type

IPv4 Header

TCP Header

MAC Data

TCP-IPv4 Client Data

Idle

End of Packet

Frame Check Sequence (CRC) Error

Search On

Start Frame Delimiter

MAC Addresses

Q-Tag Control Information

MAC Length/Type

IPv4 Header

TCP Header

MAC Data

TCP-IPv4 Client Data

Idle

End of Packet

Frame Check Sequence (CRC) Error

Decode Display

Start of Packet (green bar)

Preamble (purple packet)

SFD (purple packet)

Address (yellow packet)

EtherType (yellow packet)

IP packet (purple packet)

Data (cyan packet)

IPv4 packet (pink packet)

TCP packet (white packet)

Frame Check Sequence (yellow packet)

Error (red packet)

End of packet (red bar)

SPMI Sources (Clock and Data)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds

Per-channel thresholds

Recommended Probing

Single-ended

Formats Available

Mixed Hex

Hex

Binary

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Trigger On

Sequence Start Condition (SSC)

Reset

Sleep

Shutdown

Wakeup

Authenticate

Master Read

Master Write

Register Read

Register Write

Extended Register Read

Extended Register Write

Extended Register Read Long

Extended Register Write Long

Device Descriptor Block Master Read

Device Descriptor Block Slave Read

Register 0 Write

Transfer Bus Ownership

Parity Error

Search On

Sequence Start Condition (SSC)

Reset

Sleep

Shutdown

Wakeup

Authenticate

Master Read

Master Write

Register Read

Register Write

Extended Register Read

Extended Register Write

Extended Register Read Long

Extended Register Write Long

Device Descriptor Block Master Read

Device Descriptor Block Slave Read

Register 0 Write

Transfer Bus Ownership

Parity Error

Decode Display

Arbitration Start (yellow bar)

Connect Bit (purple packet)

Master ID (purple packet)

Alert Bit (yellow packet)

Slave Request Bit (yellow packet)

Master Priority Level (gray packet)

SSC (green bar)

Command Frame, including Byte Count ² (yellow packet)

Address (yellow packet)

Data (cyan packet)

Parity (purple packet)

Ack/Nack (purple packet)

Parity error (red packet)

End of packet (red bar)

SpaceWire Sources

(Strobe and Data)

Analog Channels

Digital Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-Channel Thresholds

Recommended Probing

Differential

Address/Data Formats Available

Hex

Binary

Bus

Bus Only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Search On

Synchronization

Control Code

Control Character

Data

Errors

Maximum Clock/Data Rate

2 Mbits/sec to 200 Mbits/sec

Decode Display

Null

Control Character

Control Code

FCT

Time-Code

Parity

Data-Control Flag

Data

End Of Packet

Error End Of Packet

Escape Sequence

Escape Error

Start FCT

Start NULL

Digital channels

Active Math channels

Differential

Off

Binary

Mixed Hex

Start of Stream Delimiter

MAC address: Mac Address Source, Mac Address destination

Beacon

Ether Type: IPv4 and IPv6 with Header Type: TCP, UDP, ICMP

Payload: Payload Bytes, Payload value

Data: Data Bytes, Data

End of stream Delimiter.

End of stream Delimiter Ok

Errors: CRC, ESDERR, ESDJAB, Checksum, Any

Start of Stream Delimiter

Preamble

Beacon

End of stream Delimiter.

End of stream Delimiter Ok

Errors: ESDERR, ESDJAB

Ethernet Source(s)

Analog Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-channel Thresholds

Speed

100 Mbits/sec

Recommended Probing

Differential

Formats Available

Mixed Hex

Hex

Binary

Mixed ASCII

Bus

Bus Only

Results Table

Decoded packet data in a tabular view

Search On

Start of Frame

Start of Frame Delimiter

MAC Addresses

Q-Tag Control Information

MAC Length/Type

IPv4 Header

TCP Header

MAC Data

TCP-IPv4 Client Data

End of Packet

Frame Check Sequence (CRC) Error

Maximum Clock/Data Rate

100 Mbits/sec

Decode Display

Start of Packet (green bar)

Preamble (purple packet)

SFD (purple packet)

Address (yellow packet)

EtherType (yellow packet)

IP packet (purple packet)

Data (cyan packet)

IPv4 packet (pink packet)

TCP packet (white packet)

Frame Check Sequence (yellow packet)

Error (red packet)

End of packet (red bar)

8b10b Sources

(Strobe and Data)

Analog Channels

Digital Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-Channel Thresholds

Recommended Probing

Differential

Formats Available

Hex

Binary

Symbolic

Bus

Bus Only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Search On

Symbols [Format:8bit,10bit&symbol]

Errors

Maximum Clock/Data Rate

1 Tbits/sec

Decode Display

Control Symbol (yellow packet)

Data Symbol (cyan packet)

Error Handling

Invalid Symbols

Running Disparity (6 bit and 4 bit)

• Analog channels (Spectrum View to be turned on)
• Active Math channels
• Active Reference channels

• Decode capability for NFC protocol
• Decode capability for ISO/IEC 15693, ISO/IEC14443A, ISO/IEC14443B, and FeliCa Standards
• Decode capability for Command and Response packets
• Search capability for SOC, SOS, SYNC, EOC, SOF, AFI, PUPi, Identifier, Payload, UID, EOF, DATa, and EOS
• Search capability for different ISO/IEC 14443A commands like REQ, WUPA, Proprietary, SELECT, and HLTA
• Search capability for different ISO/IEC 15693, ISO/IEC 14443B, and FeliCa commands
• Search capability for Response packets
• Search capability for Errors like CRC, Parity

• Perform NFC protocol decode and search seamlessly with a single oscilloscope instrument ​
• Analyze and correlate analog RF and digital signals simultaneously for enhanced insight
• Save transfer time and memory of large recordings with hardware DDC (digital downconverter) on each input​
• Trigger on 13.56 MHz RF envelope using RF vs. Time traces and triggers, reducing the need to trigger on other I/O signals ​

• EMI-NF-PROBE near-field probe set for contact-less probing and manual troubleshooting
• TPP1000 probe for conducted probing

• Hex
• Binary
• Mixed Hex

• Flag
• Command Code
• Mask Value LSB MSB
• Mask Length
• DSFID
• Message LSB MSB
• Get Information Parameter Request
• Custom Request Parameter LSB MSB
• IC MFG Code
• Length
• Key ID
• CSI
• UID
• Data LSB MSB
• Optional AFI
• AFI
• Number Of Block
• First Block
• Error Code
• Information Flags
• VICC Memory Size
• SEL
• NVB
• Each Bit RFU
• Propriety Coding
• UID Size
• SAK
• Bit Frame AntiCollision
• Parity
• Response Code
• PARAM
• Data
• Pseudo Unique PICC Identifier
• Identifier
• Param1
• Param2
• Param3
• Param4
• Higher Layer INF
• Attrib Info
• Higher Layer Response
• CRC_B_APP
• Application Data
• Number of Applications
• Bit Rate Capability
• Max Frame Size
• Protocol Type
• Frame Waiting time Integer
• Application Data Coding
• NAD Frame Option
• CID Frame Option
• Start up Frame Guard Time
• SYNC
• BSt
• BRt
• BRS
• BSi
• BRi
• DIDi
• DIDt
• FSL
• General Byte
• NADi
• NADt
• nfcid2t
• nfcid3t
• nfcid3i
• PPi
• PPt
• PFB
• Payload (Polling)
• TO
• Extra Data
• CRC
• Error
• Unframed

NRZ Source(s)

Analog Channels

Digital Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-channel Thresholds

Recommended Probing

Differential

Bit Order

MSB First

LSB First

Polarity

Normal

Invert

Formats Available

Hex

Binary

Bus

Bus Only

Bus and Waveforms

Simultaneous display of bus and digital waveforms.

Results Table

Decoded packet data in a tabular view

Search On

Data Bytes [Maximum 5]

Maximum Clock/Data Rate

1Gbits/sec

Decode Display

Data (cyan packet)

Digital channels

Active Math channels

Active Reference channels

5 Gbps

Off

Binary

Mixed Hex

Bus and Waveforms

• Control Characters

  COM, EDB, END, FTS, IDL, PAD, SDP, SKP, STP, EIE, Any

• DLLP

  ACK/NAK, Power Management, Flow Control, Vendor Specific

• TLP

  Memory, I/O, Config, Message, Completion, Atomic Operation, Prefix

• Errors

  CRC, LCRC, ECRC, Frame Length, Disparity, Symbol, Packet

PSI5 Sources

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds

Recommended Probing

Sensor to ECU

Current probe with minimum current rating of less than 50mA - TCP2020, TCP202A

ECU to Sensor

Differential Voltage probe - TDP1000, TDP1500, and TAP1500

Direction

ECU to Sensor

Sensor to ECU

Mode

Slow (83.3 kbps)

Standard (125 kbps)

Fast (189 kbps)

Data A

10 - 24 bits

Data B

0 - 12 bits

Frame Control

0 - 4 bits

Status

0 - 3 bits

Sync Bit Period

1 us to 300 us

Sync Mode

Pulse Width

Tooth Gap

Data Format

Nibble

Byte

Decode Format

Hex

Binary

Mixed Hex

Bus

Bus only

Bus and Waveforms

Simultaneous displays bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Mark On

Direction - Sensor to ECU

Start [Start of packet]

Status

Data [Region B and Region A]

Block ID

Sensor Status [5 different status]

Errors [Parity CRC and any]

Direction - ECU to Sensor

Start [Start of packet]

Status

Data [4 or 8 bits]

Function Code

Sensor Address

Register Address

CRC Error

Message Field (Yellow Field)

Status (Yellow Field)

Frame Control (Yellow Field)

Data B (Cyan Field)

Data A (Cyan Field)

Parity or CRC (Purple Field)

Sensor Address (Yellow Field)

Function Code (Yellow Field)

Register Address (Yellow Field)

Data (Cyan Field)

CRC (Purple Field)

Error Type

Parity

CRC

Response Code (Sensor to ECU)

Digital channels

Active Math channels

Active Reference channels

Binary

Mixed Hex

OpCode

Physical Address

Register Address

Data

Error: Any, OpCode Error, Device Type Error

Clause (Green)

OpCode (Yellow)

Physical Address (Yellow)

Register Address (Yellow)

Device Type (Yellow)

Data/Address (Cyan)

Error: Any, OpCode Error,

Device Type Error (Red)

Digital channels

Active Math channels

Active Reference channels

Binary

Mixed Hex

Slave Address

Command

Payload: Master, Slave, Either

Errors: Any, Missing Ack, Parity

End

Start (Green)

Slave Address (Yellow)

Command (Yellow)

Master Payload (Cyan)

Master Parity (Purple)

End (Purple)

Turnaround (Purple)

Ack (Purple)

Slave Payload (Cyan)

Slave Parity (Purple)

• Select the SVID bus on which to trigger.
• Trigger On select the type of information on which to trigger.

• Start
• Slave Address
• Command
• Payload
• Errors

Analog channels

Digital channels(single-ended)

Active Math channels

Active Reference channels

Speed High Speed (480 Mb/s)

Full Speed (12 Mb/s)

Low Speed (1.5 Mb/s)

Mixed Hex

Hex

Binary

Mixed ASCII

Characteristic Description

Search On Sync

Reset

Suspend

Resume/Wake

Connect

Control Message

Port Reset

Port Configuration

Device Chirp

Host Chirp

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (HS only)

Special Packet: PRE (FS only), ERR, SPLIT, PING

Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (LS and FS only)

Start of packet (green bar)

Sync (green packet)

PID (yellow packet)

Token (address) (yellow packet)

Data (cyan packet)

CRC (purple packet)

Error (red packet)

End of packet (red bar)

Control Message (Yellow packet)

Zeros (Blue packet)

Ack (Purple packet)

Port Reset (Red Bar)

Port Configuration(Green Bar)

Connect (Green Bar)

Resume/Wake(Green Bar)

Device Chirp(Green Bar)

Host Chirp (Green Bar)

End Of reset(Red Bar)

Table view

* Depends on the Model

View more than 10000* points

Simultaneous Buses

* Depends on the Model

Analog channels

Digital channels(single-ended)

Active Math channels

Active Reference channels

Hex

Binary

Characteristic Description

Search On Sync

Reset

Suspend

Resume/Wake

Connect

Control Message

Port Reset

Port Configuration

Device Chirp

Host Chirp

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (HS only)

Special Packet: PRE (FS only), ERR, SPLIT, PING

Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (LS and FS only)

Sync Pattern

Packet Header

Packet Data

Packet Trailer

Error

Control Field (yellow packet)

Payload Field (cyan packet)

Parity

Manchester

When Packet View is ON

Sync Bits

Header

Data

Trailer

Errors

When Packet View is OFF

Data

Errors

Sync Bits

Header

Data

Trailer

Data

* Depends on the Model

* Depends on the Model

Analog channels

Math channels

Active Reference channels

Decode capability in for CSI/DSI protocols.

Decode capability for Escape mode.

Decode capability for High speed burst mode.

Decode capability for 8b9b line encoding in LPDT and HS mode.

Search capability for SoT/EoT

Search capability for long and short packets

Search capability for Escape mode

Search capability for Errors like ECC, CRC, and Any

Clock – Single Ended/Differential

Data – Single Ended

Single ended probe: No. of probes: 3 (D+ and D- by default)

Differential probe: No. of probes: Not supported

Hex

Binary

Mixed Hex

Mode

Data Type

Virtual Identifier

ECC

Data

CRC

End

Error

Control Field (yellow)

ECC/CRC (Green)

Pixel Fields (Red,Green,Blue,Yellow)

Data Symbol (cyan)

ECC

CRC

SOT Sync

SoT – It searches SoT of each transmission in HS mode

EoT – It searches EoT of each transmission in HS mode.

Data – Data search (HS/LP)

Scrambling – Search for scrambling mode command

Compression – Search for Compression mode command.

**Packets – Searches for Short and long packets

Escape – Search for Escape entry mode

STOP – Search for Escape mode exit

Errors – Search for CRC and ECC errors.

Table view

Simultaneous Buses

Analog channels

Digital channels

Active Math channels

Active Reference channels

8 [8-bit Control Word]

128 [16-bit Control Word]

Hex

Binary

Mixed Hex

Start (green vertical line)

Address (yellow field)

Frame Type (yellow field)

Code (yellow field)

Ns(yellow field) [Sequence number sent]

Nr(yellow field) [Sequence number received]

Poll/Final (yellow field)

Data(cyan field)

FCS(purple field)

Abort (red vertical line)

Start [Searches for Start event]

Data [Searches for Payload Data]

Abort [Searches for Abort]

Address

Broadcast [Broadcast Packets]

No Station [Packets not pertaining to secondary]

Station [Valid Station Address]

Unnumbered

Commands [Searches for Primary Commands]

Responses [Searches for Secondary Responses]

Both Information [Searches for information frames]

Supervisory [Searches for different receiver status]

Receive Frame Ready

Receive Frame Not Ready

Reject frame

Errors

FCS [Searches for Frame Check Sequence errorrs]

Out of Numeric Order [Searches for this frame]

Stop

Analog channels

Digital channels

Math channels

Active reference channels

Decode capability in for CSI/DSI protocols. Decode capability for Escape mode.

Decode capability for High speed burst mode.

Decode capability for Word/Symbol Mode.

Decode capability in single ended and differential mode

Search capability for SoT/EoT

Search capability for long and short packets Search capability for Escape mode

Search capability for CRC Errors

Search capability on Pixel value and Pixel number in CSI/DSI packet search

CSI

DSI

Word (16 Bit data word decode)

Symbol (Symbol level decode of cphy data)

Single Ended: No. of probes: 3

Differential: No. of probes: 5

Minimum BW of probe: As minimum bitrate of HS is set to 4 Mbps, almost all probe should work. But considering the general CPHY HS speed is about 1 GHz and speed can vary depending on customer, the probe need to based on what speed the end customer want to test.

Hex

Binary

Mixed Hex

Decoded packet data in a tabular view with columns containing:

Mode Data Type

Virtual Identifier

PHCCRC

Data CRC

Symbols

End

Error

Control Field (yellow) ECC/CRC (Green)

Pixel Fields (Red, Green, Blue, Yellow)

Data Symbol (cyan) Raw Fields (Cyan)

Word and Symbol Decode (cyan)

PHCRC

CRC

SOT Sync

CSI (CSI packet decode)

DSI (DSI packet decode in HS/LP)

Word (16 bit word decode)

Symbol Decode

Search On (CSI/DSI)

SoT – Searches SoT of each transmission in HS mode

EoT – Searches EoT of each transmission in HS mode.

Data – Data search (HS/LP)

Scrambling – Search for scrambling mode command

Compression – Search for Compression mode command.

**Packets – Searches for Short and long packets

Escape – Search for Escape entry mode

Errors – Search for CRC and PHCRC errors.

**Can select from the list of standard packet names

Analog channels

Digital Channels

Active Math channels

Active Reference channels

Decode capability in for 1-WIRE protocol.

Decode capability for Standard mode.

Decode capability for Overdrive mode.

Search capability for Reset, Presence events

Search capability for Command, Data

Search capability for different ROM packets such as Read/Match/Skip/Search ROM and Alarm based on the Standard or Overdrive mode chosen.

Search capability for CRC Error

Hex

Binary

Mixed Hex

Single Ended passive probe

Differential passive probe

Decoded packet data in a tabular view with columns containing:

Initialization

ROM Command

ROM Code

CRC

Command

Data

Error

ROM Command/ROM Code/Command (yellow) CRC (purple)

Reset/Presence event (Green)

End event (Red)

Search On 1-WIRE

Reset – Searches for the Reset event. Reset is the default trigger on condition.

Presence – Searches for the Presence event.

Command – Searches for Command.

Data – Searches for the Data.

Read ROM – Searches for the Family code and Serial number of Read ROM.

Match ROM – Searches for the Family code and Serial number of Match ROM.

Overdrive Match ROM – Searches for the Family code and Serial number of Match ROM.

Skip ROM – Searches for Skip ROM packet.

Overdrive Skip ROM – Searches for the Overdrive Skip ROM packet.

Search ROM – Searches for the ROM code.

Alarm Search – Searches for the Alarm packet.

CRC Error specifies the search condition as CRC Error.

• Analog channels- 1
• Active Reference channels- 1
• Digital channels
• Math channels

• Active Probes P7240
• TPP1500
• Low Voltage Single Ended Probes

Transmitting node transmits data to the communication bus, it transmits to encoding circuit after converting the data to UART format.

Binary

Mixed Hex

• Start
• Frame type
• Frame ID
• PTYPE ID
• Sleep

• Wakeup
• Counter
• DLC
• EXTDLC
• Data
• Frame Parity
• Ptype parity
• CRC
• Errors

• IFS (start event-vertical), Start bit and stop bit (Green)
• Frame ID (Yellow)
• IBS: (Dark blue)
• Data, Counter, wakeup, sleep, DLC, and EXTDLC (cyan)
• Parity and CRC (Purple)

• CRC
  • Parity
  • IBS
  • Frame error

• Start
• Frame
• Frame ID
• PTYPE
• DLC
• ExtDLC
• Network management: Wakeup and sleep
• Counter
• Data
• Errors: Parity, CRC, IBS, Frame.

• Analog channels
• Digital Channels
• Active Math channels
• Active Reference channels

• Decode capability for eSPI protocol.
• Decode capability for Single I/O mode with Alert as optional.
• Decode capability for Dual I/O mode with Alert as optional.
• Search capability for Start and End events
• Search capability for Status and Wait state
• Search capability for different channels: Channel Independent, Peripheral, OOB, Virtual Wire, and Flash Access based on command or response phase.

Further, search capability for Command phase based on different channel related command opcodes and Response phase based on with/without header.

Both phases support sub field search based on corresponding cycle type.

Search capability for Errors based on the phase: CRC/Cycle type/Command opcode/Defer/Fatal/Non-Fatal/No Response.

Binary

Mixed Hex

• Single mode (CMD and RSP on different lanes)
• Dual Mode (CMD and RSP on same lane)

(Clock, Chip Select, Command Input, Response Input + Alert)

1. Active Probes P7240
2. TPP1500
3. Low Voltage Single Ended Probes

• Protocol Search options (additional search options available under protocol decode):
  • Start and End Events
  • Wait States
  • Data
  • Errors – Invalid command type, Invalid cycle type, Fatal/Non-Fatal Errors.
• Decode formats in MIXED HEX.

• Command OpCode
• Cycle Type
• Header
• Address
• Data
• Response
• Status
• CRC
• Error
• PEC

Command OpCode, Response, Virtual Wire Count/Group/Index, Cycle Type, Tag, Length, Message Code, SMBus Slave address/Source address/Destination address/Source slave address/OpCode, Byte Count, MCTP, Destination Point, Source Point, SOM, EOM, PEC, Latency Scale, Message Tag, TO, PktSeq, Wait (Yellow)

Data, Double Word, Virtual Wire Data (Cyan)

CRC (Purple)

Stop, Response error, Unframed (Red)

Start: Enables to search the start event of the packet decode.

Channel Independent: Enables search on Channel Independent command and responses packets.

Peripheral Channel: Enables search on different types of Peripheral channel command and responses packets.

OOB Channel: Enables search on different Out-Of-Band (OOB) channel command and Responses packets.

Virtual Wire Channel: Enables search on different Virtual Wire channel command and responses packets.

Flash Access Channel: Enables search on different Flash access channel command and responses packets.

Wait: Enables to search on the wait state that appears after the TAR window.

End: Enables to search on the End events when the packet decode ends.

Phase: Select the type of phase between command and response for which to search.

Command: Enables search on the command opcode of different channels specified under the mark on.

Response: Enables to search on the response field.

Response With Header: Enables to search on the RSP opcode that consists of a Response Code and a Response Modifier.

Response Without Header: Enables to search on the RSP opcode that consists of a Response Code and a Response Modifier.

Command Opcode: Enables search on the command opcode of different channels.

Cycle Type: Enables search under command and response with header based on different cycle types for different channels.

Address: Enables search on the address field for different channels based on different commands and response with header classified based on cycle types.

Tag: Enables search on the tag field for different channels based on different commands and response with header classified based on cycle types.

Length: Enables search on the length field for different channels based on different commands and response with header classified based on cycle types.

SMBus Slave Address: Enables search on SMBus Slave address under the OOB channel.

Virtual Wire Count: Enables search on Virtual Wire Count for command and response with header under the virtual wire channel.

Virtual Wire Index: Enables search on Virtual Wire index for command and response with header under the virtual wire channel.

Virtual Wire Data: Enables search on Virtual Wire Data for command and response with header under the virtual wire channel.

Data Bytes: Sets the number of data bytes for which to search.

Data: Sets the data value for which to search. Searches based on command and response.

Status: Enables search on the status field of the response packets.

Error Type: Sets the error type for which to search based on command or response phase.

Peripheral, OOB, and Virtual Wire Channel

Ethernet sources

Analog channels

Digital channels

Active math channels

Active reference channels

Formats available

Hex

Binary

Mixed Hex

Signal Type

Single ended (default)

Differential

1. MAC Destination Address
2. MAC Source Address
3. VLAN Tag
4. EtherType
5. ECAT Header Length
6. Protocol Type
7. IP Source Address
8. IP Destination Address
9. Datagram Header
10. Publisher Header
11. Network Variable Header
12. Mailbox Header
13. Data
14. Working Counter
15. Service Data Detail

Frame Check Sequence

Decode display

Green: Start of frame

Yellow: MAC source address, MAC destination address, EtherType

Gray: TPID, TCI, UDP Source Port, UDP Destination Port, Length, Checksum, Command, Index, Position, Offset, Address, Reserved, Circulating Frame, More EtherCAT datagrams, IRQ, Working Counter, PublisherID, Network Variable Count, Channel, Priority, Type

Dark Pink: IP VersionHL, IP Service, IP Total Length, IP Identification, IP Flags, IP Fragment Offset, IP Time To Live , IP Protocol, IP Header Checksum, IP Source Address, IP Destination Address, Length, Reserved, Type, Padding, Hash, Quality

Cyan: Data, Detail, Publisher Header

Red: End

Start: Select to search on Start of Frame.

Protocol: Select to search on Protocol Types and then Frame type of each Protocol respectively.

IP Header: Select to search on IP Header based on Identification, Source, and Destination Address Values.

UDP Header: Set the 16-bit Source Port that you want to search.

MAC Address: Select to search on Packets having the combination of Source and Destination Address Values.

Tag Control Information: Sets the 16-bit tag control information that you want to search.

EtherCAT Header Length: Sets the 11-bit ethercat header length that you want to search.

Datagram: Select to search on sub-fields of datagram including Datagram Header, Data, and Working Counter.

Network Variable: Select to Search on sub-fields of network variable including Publisher Header, NV Header, and Data.

Mailbox: Select to search on sub-fields of mailbox including Mailbox Header, Service Data, and Error Reply Service Data.

FCS Error: Select to search on FCS Error if any.

End of Frame: Select to search on end of frames.

SMBus sources

Analog channels

Digital channels

Active math channels

Active reference channels

Salient features

Decode capability for SMBus protocol with PEC Byte as optional.

Search capability for Start, Repeated Start, Stop, and Idle events.

Search capability for addresses such as Host Address, Device Address, and Address.

Search capability for Command Code, Data and UDID Data.

Search capability for Errors – Any, ACK, NACK.

Formats available

Hex

Binary

Mixed

1. Protocol Type
2. Address
3. Read/Write
4. Command Code
5. Byte Count
6. Data
7. Acknowledgement

PEC

Decode Display

Green: Start, Repeated Start

Yellow: Address, Host Address, Device Address, Slave Address, Device Slave Address, Assigned Address, Targeted Slave Address, Read, Write, Read/Write, Command Code, Byte Count, Bit, Idle

Cyan: Data, Device Capabilities, Version Revision, Interface, Vendor ID, Device ID, Subsystem Vendor ID, Subsystem Device ID, Vendor Specific ID

Purple: PEC

Red: End

Start: Select to search on the start events.

Repeated Start: Select to search on the repeated start events.

Address: Sets the 7-bit address pattern that you want to search.

Host Address: Select to search on the host address.

Device Address: Set the 7-bit device address that you want to search.

Command Code: Sets the 8-bit command code that you want to search.

Data: Sets the data pattern that you want to search.

Data Bytes: Sets the number of data bytes that you want to search (1 to 8 bytes).

Field Bytes: Sets the field bytes as 1, 2, or 4 for UDID Data.

UDID Data: Sets the UDID data that you want to search.

Error Type: Sets the error bytes that you want to search. You can search on ANY, ACK, NACK, and PEC errors (PEC error search is available only when the PEC Byte in SMBus bus configuration is set as True).

Stop: Select to search on the stop events.

Idle: Select to search on the idle events.