연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

Why does the amplitude of my signal cut to half+ or even less then half+ when I add noise?

질문:

Why does the amplitude of my signal cut to half+ or even less then half+ when I add noise?

답변:

Adding noise in the AFG 3000 uses a power splitter to add the noise to the signal. When you are at the highest amplitude levels of your AFG 3000, it must reduce the amplitude of the signal, in order to be able to add noise. It will halve the amplitude, because theoretically the noise could be as high as half the amplitude, and so the AFG 3000 must accommodate that possibility. Because the noise is Gaussian, however, it rarely is that high in amplitude, so measuring peak to peak will not necessarily show double the voltage.


FAQ ID 56266

모든 FAQ 보기 »