연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

제품 지원 및 다운로드

텍트로닉스 제품 지원 센터

'텍크놀로지(Tek-nology)'를 개발하는 일은 행복하지만, 동시에 매우 바쁘다는 걸 알고 있습니다. 이에. 텍트로닉스는 현재 출시되는 모든 제품과 단종된 여러 제품에 대한 설명서와 데이터 시트, 소프트웨어를 쉽게 다운로드할 수 있도록 제품 지원 센터를 만들었습니다. 사용 중인 제품명을 입력해 주시기만 하면 텍스로닉스가 보유하고 있는 모든 정보를 알려 드리겠습니다.

모델 입력:
Search by Product Category (optional)

  1. 위 필드에 텍트로닉스 또는 Keithley 제품의 모델 또는 제품 시리즈 이름을 입력하십시오.

  2. 입력하면 검색 필드에 관련 제품명이 표시됩니다.

  3. 결과 목록에서 해당 제품명을 선택합니다.

  4. 이동을 클릭하여 사용 중인 제품에 제공되는 지원 정보를 확인하십시오.

검색 팁: 최대한 많은 결과를 보려면 사용 중인 제품의 기본 모델 이름을 선택하십시오. 목록에 표시될 수 있는 특정 옵션이나 구성은 선택하지 마십시오.

선택한 제품 모델은 현재 구입할 수 있으며, 다음 지원 정보도 제공됩니다.

  • 데이터 시트 참고자료 번호: 릴리즈 날짜
    TriMode™ Probe Family
    The TDP7700 Series TriMode probes datasheet provides an overview of the product's features, important specifications, and ordering information.     		51W-61352-7
  • IsoVu 전류 및 전압 프로브를 사용한 하이사이드 더블 펄스 스위칭 손실 확인
    이 동영상은 와이드 밴드갭 SiC 및 GaN 전력 컨버터를 작업하는 엔지니어를 위해 정확한 하이사이드 이중 펄스 측정을 시연합니다. 애플리케이션 엔지니어인 Seamus Brokaw는 IsoVu™ 절연 전류 프로브, 절연 전압 프로브, 더블 펄스 테스트 애플리케이션 소프트웨어를 실행하는 5 시리즈 B MSO를 사용합니다. 그는 테스트 설정, 프로브 …
    기간: 13분 11초
    멀티 채널 스펙트럼 분석
    Being able to see the frequency content of a signal is extremely useful for troubleshooting.  Being able to see multiple channels of spectrum analysis, synchronized with signals in the time domain …
    기간: 4m 55s
    Powering Our Electrified Future
    3-phase Motor Drive Measurement Demonstration
    Watch this demonstration of a three-phase power system highlighting the ability of 5 or 6 Series B MSO oscilloscopes to precisely measure the performance of switching power converters and control …
    기간: 3:24
    Ripple noise measurement of Power supply
    기간:
    Comparing phase on RADAR pulses with the 6 Series MSO
    Comparing phase on RADAR pulses with the 6 Series MSO
    An AWG70002B was used to create a pair of 20us wide RF pulse trains at 3.85GHz. One pulse train has a constant/unchanging phase – this is our reference and is applied to Ch1. The other pulse …
    기간: 3m 29s
    Automotive millimeter-wave radar signal analysis
    기간:
    How to control Tek Scope over LAN
    How to Control a Tektronix Oscilloscope Over a LAN
    Learn how to use the eScope function to remotely control a Tektronix oscilloscope over a network without any special software. This video shows how to find the IP address of the scope and use a …
    기간: 2:14
    Leveraging HSI with Python
    This video discusses the new Tektronix Python libraries - TekHSI and tm_data_types, how to install the new TekHSI Python libraries, some programming examples and how these new libraries compare to …
    기간: 10m 43s
    What is HSI?
    Watch this demo video to learn how Tektronix High Speed Interface (HSI) can boost performance speed to be much faster than traditional VISA- and SCPI-based waveform data transfer.
    기간: 6m 7s
    How Pre-Compensation Improves Signal Fidelity
    For RF design engineers, validation and verification engineers, or radar and EW systems engineers working on wideband radar systems, satellite communications systems, and other high-bandwidth RF …
    기간: 03:36
    TekScope 2.12 - What's New
    TekScope v2.12 includes a built-in screenshot capture feature, HSI enhancements supporting 2.5Gbps USB to ethernet adapters, digital power management, protocol decodes and more.  Watch this short …
    기간: 2m 22s
    Making Power Rail Measurements
    Making Power Rail Measurements
    See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO …
    기간: 0h 6m 15s
    Double Pulse Testing - Energy Loss Measurements
    The switching performance of power semiconductors is often characterized using double pulse tests. This testing is now being widely applied to GaN and SiC MOSFETs. This video explains how to use …
    기간: 7 minutes
    Wide Bandgap Device Validation
    Wide Bandgap Applications
    Wide Bandgap power devices (SiC and GaN) offer significant benefits and are smaller, faster and more efficient than their silicon counterpart. But they also present several validation challenges …
    기간: 24:07
    Time Domain Reflectometry Measurements and Analysis with 4, 5 and 6 Series MSO Oscilloscopes
    This video demonstrates Time Domain Reflectometry (TDR) measurements using a 6 Series MSO oscilloscope.  (TDR measurements are also available on 4 and 5 Series MSOs.) Having TDR measurements on …
    기간: 7
    Tektronix tm_devices V1.4 - What's New
    Watch this video to learn what's new in V1.4 of tm_devices - the Tektronix device management package that enables better control and usage of test & measurement devices in Python scripts.
    기간: 3m 47s
    Work and collaborate almost anywhere with the 5 Series B MSO
    Work and collaborate almost anywhere with the 5 Series B MSO
    Control your oscilloscope and analyze your measurements at home.  Learn how to connect to a 5 Series B MSO remotely, save measurements, and analyze waveforms on your PC.   Note: A 5 Series MSO is …
    기간: 04:32
    Connect to an Oscilloscope Using tm_devices
    Combining the power of Python and Tektronix oscilloscopes makes complex testing procedures more efficient, accurate and customizable. This short video shows how to use tm_devices, the Tektronix …
    기간: 2m 5s
    Multi-Channel Wireless Modulation Analysis
    See how oscilloscopes such as the 6 Series B MSO Mixed Signal oscilloscope are enabled by advanced features of Tektronix SignalVu-PC software to provide RF spectral and modulation analysis across …
    기간: 5:08
    CAN XL Decoding and Triggering with an Oscilloscope
    CAN XL is a third generation of CAN bus, designed to bridge gaps between existing CAN standards and higher data-rate standards such as Automotive Ethernet.  This short video shows how to set up …
    기간: 3m 45s
    Measuring Frequency Settling Time
    Frequency settling time, an essential measurement in the design and evaluation of programmable oscillators, phase locked loop circuits, RF synthesizers and more, becomes much easier when the …
    기간: 14:12
    1000BASE-T Gigabit Ethernet Testing with Disturber
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) transmitter (Tx) testing with a disturber.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software.  …
    기간: 6:38
    Exploring the Integrated Arbitrary Function Generator - 2, 4, 5, 6 Series MSOs
    Having an arbitrary/function generator built into your oscilloscope is useful and convenient. Learn about the AFG outputs available in 2, 4, 5 and 6 Series MSOs.
    기간: 4m 56s
    Logic and Mixed Signal Analysis
    Built-in logic analysis on mixed signal oscilloscopes expand visibility into digital systems. This video gives a quick overview of the logic probe, settings, triggering and searches.
    기간: 3m 4s
    Advanced Power Supply Measurements and Analysis with Tektronix Oscilloscopes
    Learn how the Advanced Power Supply Measurements and Analysis package for Tektronix oscilloscopes simplifies analysis of power conversion systems with automated power quality, harmonics, switching …
    기간: 7m 46s
    CAN Bus Decoding and Triggering
    This video covers the basics of CAN bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    기간: 5m 16s
    Oscilloscope Measurements on 3 Phase PWM Systems
    Making measurements on the PWM outputs of inverters and motor drives is challenging. Learn about automated 3-phase power measurement packages on 4, 5 and 6 Series B MSO oscilloscopes that deliver …
    기간: 7m 26s
    SPI Bus Decoding and Triggering
    This video covers the basics of SPI bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    기간: 5m 18s
    I2C Bus Decoding and Triggering
    This video covers the basics of I2C bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    기간: 5m 12s
    1000BASE-T Gigabit Ethernet Return Loss Demo
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) return loss testing.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software.  Hardware includes a …
    기간: 4:40
    1000BASE-T Gigabit Ethernet Testing Demo
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) testing.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress software to perform the testing.  Hardware includes a Tektronix …
    기간: 6:32
    RF Analysis on 4_5_6 Series MSOs
    Overview of RF Analysis on Tektronix 4, 5 and 6 Series Mixed Signal Oscilloscopes
    Learn about the many types of RF analysis available on the 4, 5 and 6 Series MSOs, enabled by the patented integrated digital downconverters behind each channel. This overview touches on …
    기간: 1:51
    Python_Programming
    Test Automation and Python Programming
    Customers across all industries and applications are using automation to extend the capabilities of their oscilloscopes.  Here we cover what you need to get started programming scopes in Python.  …
    기간: 31:09
    TekScope V2-4 - Whats New
    Watch this short video to learn about the new features in TekScope version 2.4, including TekScope Basic – a new free tier license, maintenance licenses, fast frames with improved support, a new …
    기간: 4m 39s
    Electric Vehicle Charging - What's Ahead?
    With electric vehicles (EVs) increasingly becoming mainstream, the industry must create a convenient and reliable EV charging network to ensure driving adoption. Watch as we discuss what's coming …
    기간: 26:18
    Gain Insights with the Spectrogram Feature of Spectrum View
    See how you can get more insight to transient and dynamic behavior of the spectral content of your signals. Using the new spectrogram feature, an enhancement of the RF vs time option for Spectrum …
    기간: 7:15
    Decoding Near Field Communications (NFC) on 4, 5 and 6 Series MSOs
    How to use Tektronix 4, 5 and 6 Series MSO oscilloscopes to decode and analyze Near Field Communications (NFC) wirelessly, using a near field probe and the RFNFC package on the instrument.
    기간: 6:02
    What Is Driving the Power Electronics Market?
    Gain new insights into the field of power electronics including market overviews and an overview of new device technologies from Dr. Ana Villamor, Team Lead Analyst for power electronics, Yole …
    기간: 28:44
    SignalVu Spectrum Analysis Software
    Hear an overview of SignalVu, Tektronix's RF and vector signal analysis platform. Tektronix' spectrum analyzers and oscilloscopes combined with SignalVu uniquely allows you to view live spectral …
    기간: 00:12:51
    Automotive Multigigabit Ethernet Webinar
    Autonomous driving and connected vehicle are driving higher speed in-vehicle networks, such as Automotive Ethernet. This webinar offers insights into the new measurement requirements for the …
    기간: 55:37
    Ground Loops: What Are They, Why Should We Care, and How Can They Be Fixed?
    Power rail noise is one of the most significant sources of jitter in high-speed systems, phase noise in RF systems, and noise in A/D and D/A converters.  Semiconductor manufacturers are responding …
    기간: 27:30
    Double Pulse Testing: Smart Probing OR Cable Monster?
    Watch as we discuss techniques for properly testing Silicon Carbide (SiC) devices.  We'll review considerations for creating a double pulse test setup.  We offer an overview of basic equipment …
    기간: 30:05
    How Silicon Carbide Is Powering the Electric Vehicle Revolution
    Silicon carbide (SiC) MOSFETs are supplanting silicon IGBTs in the drivetrain inverter of battery electric vehicles. While today SiC claims only around 5% of the market, with the vast majority of …
    기간: 30:07
    Automotive Ethernet Signal Separation Demo
    Automotive Ethernet 100BASE-T1 Signal Separation and Protocol Decoding Demo
    A demonstration of 100BASE-T1 Automotive Ethernet protocol decoding on a 6 Series MSO oscilloscope.  This video shows how full-duplex 100BASE-T1 can be separated and decoded without breaking the …
    기간: 5:21
    Jitter-from-Power_Supply
    Signal and Power Integrity
    Watch as panelists discuss emerging technologies and the feedback loop between signal integrity and power integrity. See how to combine jitter and power integrity analysis into a formidable tool …
    기간: 35:32
    Measuring Bode/Control Loop Response of a Power Supply
    This explains how to use an oscilloscope equipped with control loop response measurement capability to measure the frequency response (Bode Plot) of a power supply control loop. A Bode plot …
    기간: 01:39
    How to Measure Power Rail Current with a Shunt Resistor
    How to Measure Power Rail Current with a Shunt Resistor
    Make extremely accurate power rail measurements using two Tektronix power rail probes, a Keithley DMM6500 touchscreen Digital Multimeter, and ultra-low-noise 6 Series mixed signal oscilloscope …
    기간: 0h 1m 46s
    SignalVu-PC Multi-Channel RF and Pulse Analysis
    See how RF design and validation engineers working on MIMO, phased-array and beam-forming systems can make fast, accurate pulse and phase measurements on as many as 8 channels using SignalVu-PC …
    기간: 4m 37s
    MIL-STD-1553 bus support
    MIL-STD-1553 bus support
    Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering …
    기간: 0h 3m 14s
    Simplify Multi-Channel RF Generation and Analysis
    Watch our Mixed-Signal Oscilloscope capturing multiple RF channels and performing RF analysis of radar pulses. Here we're taking advantage of the high-bandwidth and independent digital …
    기간: 57s
    USB4 Receiver Test Solution
    USB4 Receiver Test Solution
    Learn about our USB4 receiver testing solution which offers comprehensive coverage for compliance requirements outlined by the USB Implementers Forum or USB-IF to give you confidence that your …
    기간: 6m 24s
    Low amplitude RF emission analysis with RF vs Time Triggering
    Low amplitude RF emission analysis with RF vs Time Triggering
    See how the RF vs Time hardware triggering capability (Spectrum View) on the 4, 5, and 6 Series MSO oscilloscopes can capture a low amplitude RF emission.  This video focuses on the low amplitude …
    기간: 4:23
    Tektronix Automotive Radar
    When making radar measurements, it is critical to have  synchronous measurements by a single digitizer. Watch our short video in which Alex Krauska, Solutions Engineer, demonstrates making four …
    기간: 2m 12s
    Latency Measurement: CAN to Ethernet
    Webinar: Automotive Wired and Wireless & RF Communication
    Learn about the domain/zonal controllers and discuss what changes it will bring for in-vehicle network architectures, highlighting some of the testing challenges measurement requirements. 
    기간: 57:08
    MIPI D-PHY C-PHY M-PHY
    MIPI C-PHY D-PHY Webinar
    MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobile applications.  Oscilloscope-based protocol layer validation enables isolating …
    기간: 31:33
    Automotive Ethernet PAM3 and Signal Separation Introduction
    Automotive Ethernet PAM3 and Signal Separation Introduction
    Automotive Ethernet with PAM3 introduces new test challenges. Tektronix' new, innovative, non-intrusive Signal Separation simplifies Automotive Ethernet testing and set-up, providing advanced …
    기간: 0h 8m 3s
    TekExpress Demo Multigigabit Ethernet
    A demonstration of TekExpress Automotive Ethernet, an automated application, for Automotive Multigigabit Ethernet (IEEE802.3ch) Compliance Testing.
    기간: 6:56
    Mixed Domain Analysis
    Spectrum View for Mixed Domain Analysis
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length and enables their Spectrum …
    기간: 29:31
    tekscope 1-44 - whats new
    TekScope V1.44 - What's New
    Watch this video learn about the new features in TekScope version 1.44, including RF analysis capabilities, added support for the MSO2000 and MSO2000B oscilloscopes, user interface improvements …
    기간: 8m 8s
    Triggering on an ASK Amplitude Shift-Keying Signal with Spectrum View
    Triggering on an ASK (Amplitude Shift-Keying) Signal with Spectrum View
    Watch this short demo of RF vs Time hardware trigger to see how an ASK (Amplitude Shift-Keying) signal changes over time.  The Spectrum View capability on the 4, 5 and 6 Series MSO oscilloscopes …
    기간: 3:16
    Time Correlated, Multi-Channel Analog/Digital/RF Signal Analysis Workshop
    In this workshop, Tektronix Senior Applications engineer Alan Wolke demonstrates how to perform time correlated multi-domain signal analysis across multiple channels with the Tektronix 6 Series B …
    기간: 34:07
    Spread Spectrum Clock Analysis With RF vs Time Triggering
    Spread Spectrum Clock Analysis With RF vs Time Triggering
    See how to stabilize a hardware trigger on the up-down chirp pattern of a spread spectrum clock using a Frequency Deviation vs. Time trigger.  The Spectrum View capability on the 4, 5 and 6 Series …
    기간: 2:14
    Observing the Step Load Response of a Power Supply
    After checking the gain and phase margin of a power supply control loop, observing the response of the supply to a step load change lets you watch the control loop in action. In this example, a …
    기간: 01:38
    Measuring Power Supply Rejection Ratio (PSRR)
    Example of the use of an oscilloscope to measure Power Supply Rejection Ratio, in this case for a linear voltage regulator. Power Supply Rejection Ratio or Power Supply Ripple Rejection (PSRR) is …
    기간: 01:34
    Measuring Negative Resistance of a DC-DC Converter
    Example of how to determine the EMI filter stability and the Middlebrook Criterion. The Middlebrook Criterion is a method for determining if the input filter of a switching mode power supply will …
    기간: 03:13
    Measuring Impedance Using TDR Techniques on an Oscilloscope
    Examples showing how to use Time Domain Reflectometry (TDR) to measure impedance and length of cables and PCB traces as well as printed circuit board dielectric constant and fault location. You …
    기간: 05:42
    Measuring an Inductor with DC Bias
    This video shows an example of using a line injector and oscilloscope to measure frequency dependent inductance with a 1 A DC Bias current applied to the inductor. Power supplies include inductors …
    기간: 01:49
    Finding root cause of EMI signals with Spectrum View
    Finding root cause of EMI signals with Spectrum View
    See how to track down the source of transient RF/EMI emissions with Spectrum View and the RF vs Time triggering capabilities. Clearly determine which PCB signals are causing EMI emissions so that …
    기간: 4:21
    Capturing a Clock Frequency Glitch With RF vs Time Trigger
    See how an edge trigger on the RF Frequency Deviation vs Time trace isolates and captures a short duration transient in the frequency of a clock signal.  The Spectrum View capability on the 4, 5 …
    기간: 1:55
    Advanced Power Measurements with Tektronix Oscilloscopes and Picotest Accessories
    Advanced Power Measurements with Tektronix Oscilloscopes and Picotest Accessories
    This Picotest video gives a quick overview of the many power-related measurements that can be made using a Tektronix oscilloscope and Picotest accessories. Advanced power supply tests, such as …
    기간: 1m 49s
    700 uΩ Active 2-Port Impedance Measurements
    Example of the use of an oscilloscope and signal source to measure sub-milliohm impedance of an active power plane. Source: Arbitrary/function generator (built into 6 Series MSO) …
    기간: 01:39
    Power Integrity Demo at embeddedworld2019
    Power Integrity Demo at embeddedworld2019
    Are you seeing ALL the noise from your power rails? Lee Morgan, Technical Marketing Manager in EMEA, demos one of our power integrity setups with a 6 Series MSO, our new Power Rail Probes, and an …
    기간: 0h 1m 27s
    Tips, Tricks, and Traps - Sharing Test Data across the Bench and into the Cloud Webinar
    This webinar compares different methods of untethering your instrument data from your bench. Accessing your data locally and remotely is discussed, from custom Python code to automatic cloud …
    기간: 46m 31s
    TekDrive Scope Collaboration in the Cloud Webinar
    TekDrive is a file sharing platform for storing, sharing, and collaborating on waveform and analysis data in a much more convenient, efficient, secure, and useful way. In this webinar, you will …
    기간: 47m
    Using Spectrum Time to View Turn On in Frequency Domain
    Digitizers and Software for High Energy Physics
    Watch as we demonstrate the use of digitizers having high signal integrity and software being used to reliably enable single shot and high-energy physics tests.
    기간: 41:56
    5G Vector Analysis MIMO-OTA Webinar
    Webinar on applications and trends and solving problems making measurements in 5G MIMO using a scope for wideband analysis.  A demonstration shows time and frequency correlation for a power …
    기간: 35:33
    The Science Behind The Low Noise
    The Science Behind The Low Noise
    What's the big deal with low noise? We talked to our engineers about how they achieved ground-breaking noise performance in the 6 Series Mixed Signal Oscilloscope.
    기간: 0h 6m 58s
    Tips and techniques for setting up your Tektronix 4_5 or 6 Series MSO display
    Tips and techniques for setting up your Tektronix 4 Series, 5 Series or 6 Series MSO display
    Watch how easy it can be to setup and analyze waveform behavior using the highly intuitive touch interface. Setting up your measurement and debugging your system has never been easier with the …
    기간: 1:51
    Practical techniques workshop for Mixed Signal Oscilloscopes
    Tektronix Sr. Applications Engineer Alan Wolke leads a workshop on practical tips and techniques for Mixed Signal Oscilloscopes using the Tektronix 6 Series B MSO. - How to remotely access your …
    기간: 37:32
    Power Supply Rejection Ratio on an Oscilloscope
    Power Supply Rejection Ratio on an Oscilloscope
    Learn how to get optimal results from your power supply design by checking the power supply rejection ratio. This video covers how DC-DC  converters or low voltage drop-out regulators (LDOs) …
    기간: 0h 8m 55s
    How to use Callouts on 4 5 6 Series MSOs
    How to use Callouts on the 4 Series, 5 Series and 6 Series Mixed Signal Oscilloscopes
    Learn how to annotate test results and methods with “Callouts” for easily documenting important information when sharing data across a team, recreating a measurement at a later date, or delivering …
    기간: 1:42
    How to Use Oscilloscope Visual Triggers Build complex waveform triggers simply by drawing shapes
    How to Use Oscilloscope Visual Triggers Build complex waveform triggers simply by drawing shapes
    Learn how to quickly capture bursts just by drawing a couple of boxes, and how to apply logic and add more shapes to capture increasingly complex waveforms. See how visual triggers work on the 5 …
    기간: 4m 5s
    How to change the font size on the 4 Series 5 Series or 6 Series MSO display
    How to change the font size on the 4 Series, 5 Series or 6 Series MSO display
    Watch how to easily change the font size used on your 4/5/6 Series MSO with just a few clicks. This will make it easier to read measurement values at a distance from your scope or maximize the …
    기간: 1:27
    Finding anomalies on a 6 Series B MSO Oscilloscope
    Finding anomalies on a 6 Series B MSO Oscilloscope
    Learn how fast waveform update rates help uncover intermittent signal anomalies, and advanced triggering and search techniques can determine how often they occur.   For more information on the new …
    기간: 2m 6s
    Getting SignalVu PC running on 5_6 Series MSOs
    How to get up and running with SignalVu-PC on the 5 and 6 Series MSO
    Learn how to configure and get started with SignalVu-PC software and 5 and 6 Series MSOs for vector signal analysis.
    기간: 2:42
    Analyzing turn on behavior of a spread spectrum clock with Spectrum View on 4_5_6 Series
    Analyzing turn on behavior of a spread spectrum clock with Spectrum View on 4, 5 and 6 Series
    See how Spectrum View provides ease-of-use and the ability to achieve optimal views in both RF and Time domains simultaneously when analyzing the turn on behavior of a spread spectrum clock.  This …
    기간: 2:32
    A New Way of Performing Multi-Channel Spectrum Analysis on an Oscilloscope
    A New Way of Performing Multi-Channel Spectrum Analysis on an Oscilloscope
    If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels …
    기간: 0h 6m 0s
    TekScope Datalogging
    TekScope Datalogging
    TekScope PC software, combined with Tektronix oscilloscopes, makes it easy to log waveform data, waveform images and measurements on your PC.  Simply set the logging interval, count, and hit Start …
    기간: 5m 29s
    TDR techniques Eliminate Power Integrity Issues
    TDR Measurements for Power Integrity
    See how you can use TDR (Time Domain Reflectometry) techniques to better understand power integrity issues and more quickly eliminate issues, like ripple, from your system designs.
    기간: 25:29
    SpectrumAndTimeDomain
    Spectrum View Spectrum Analysis and How it Differs from Traditional Oscilloscope FFTs (1 of 3)
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length. This enables their Spectrum …
    기간: 3:35
    RF Triggering
    Triggering on RF Frequency Changes with Spectrum View Spectrum Analysis (3 of 3)
    See how Spectrum View's triggering functionality can be used together with the independent control of time and frequency domains to capture infrequent anomalies.  Additional videos: Spectrum View …
    기간: 7:19
    Multi-Channel Spectrum View
    Using Spectrum View Spectrum Analysis on Multiple Channels (2 of 3)
    For complex troubleshooting, Spectrum View is available on multiple channels.  With all Spectrum Time indicators locked and moving together you can see time correlated spectrums across all …
    기간: 4:56
    Cable Pre-Compensation
    Improve Waveform Quality with Pre-Compensation
    See how the pre-compensation feature found on Tektronix Arbitrary Waveform Generators can correct for the negative effects of cables, components, and fixtures on the amplitude and phase of high …
    기간: 6:05
    Beamforming
    MIMO Processing for Beamforming Analysis
    See how the 4, 5, and 6B Series of MSO oscilloscopes provide a platform for multichannel test and measurement of MIMO systems through extension of MATLAB® algorithms for analysis of channel …
    기간: 24:54
    Measuring Sub-milliohm Impedance
    Making VNA Measurements Confidently
    Get tips on measuring sub-milliohm impedance on a board at low frequencies across surface mount capacitors. See how this VNA measurement is made using a Tektronix 6B Series MSO oscilloscope …
    기간: 15:36
    Looking at Analog Digital and Serial Data Simultaneously with a 6 Series B MSO
    Looking at Analog, Digital and Serial Data Simultaneously with a 6 Series B MSO
    See how a 6 Series B MSO can display a decoded serial bus, analog waveforms, and digital timing information for a rich view of your systems. This video shows a decoded SPI bus.   For more …
    기간: 2:06
    High Speed Serial and Jitter Test for 6 Series B MSO
    High Speed Serial and Jitter Test for 6 Series B MSO
    This demonstration shows the very quick jitter summary on the 6 Series B MSO, which includes an eye diagram, TIE histogram and spectrum, and bathtub plot.   For more information on the new 6 …
    기간: 01:58
    Demonstration of Automated Automotive Ethernet Compliance Test System
    Demonstration of Automated Automotive Ethernet Compliance Test System
    Test automation may be used to check automotive Ethernet transmitters for compliance with the BroadR-Reach, 100BASE-T1 (P802.3bw), and 1000BASE-T1 (802.3bp) standards. This demonstration shows the …
    기간: 0h 4m 52s
    Demonstration of Low Noise and High Resolution of 6 Series B MSO
    Demonstration of Low Noise and High Resolution of 6 Series B MSO
    This demonstration shows the clean capture of a small detail with extremely low noise, even on a signal that spans hundreds of volts.   For more information on the new 6 Series B MSO visit here.
    기간: 01:54
    Cross-Domain Troubleshooting
    Cross-Domain Troubleshooting
    Watch this demonstration showing how the 6 Series B MSO oscilloscope offers the industry’s best solution for debugging with the ability to optimize fully correlated RF (spectrum) and time-domain …
    기간: 4:38
    5G Validation & System Debug
    5G Validation and System Debug
    Learn how to perform multi-domain signal analysis of 5G base station and user equipment systems.  See the benefits of using a mixed domain oscilloscope for analyzing RF amplifier performance.  …
    기간: 6:47
    Adjacent Channel Power
    5G New Radio Vector Signal Analysis
    Watch to learn how you can simplify several 3GPP 5G New Radio transmitter tests. You’ll see how to verify transmitter characteristics including power, power dynamics, signal quality and RF …
    기간: 8:50
    MIMO analysis of RF, analog and digital
    5G Over the Air Measurement
    See how MIMO analysis of RF, analog and digital can be performed simultaneously for easy analysis and correlation between both the frequency and time domain while addressing the unmet needs of the …
    기간: 51:53
    6 Series MSO Channel-to-Channel Phase Measurements
    Channel-to-channel Phase Measurements using a 4, 5 or 6 Series MSO
    This quick demonstration shows in real-time how phase relationships change based on the relative position of antennas. The phase-coherent digital downconverters (DDCs) in a 6 Series MSO …
    기간: 2:09
    TekScope Version 1-40 - Whats New
    TekScope Version 1.40 - What's New?
    Watch this video to learn about the new features in TekScope version 1.40, including continuous acquisition, license expiration notification, and IMDA-MECH and WBG-DPT in the pro automotive and …
    기간: 7m 19s
    2-Port Shunt Through Impedance Measurement
    Example of how to measure 2-Port shunt impedance on your (Voltage Regulator Module) VRM. Power plane impedance is the most common power integrity assessment, and the 2-port shunt through method is …
    기간: 01:48
기술 지원 문의 부품 요청 지원 포럼
Looking for a Manual for very old Tektronix product? View this link : Find legacy Manuals