연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

2470 Graphical SourceMeter SMU Instrument Datasheet

추가 정보

온라인으로 읽기:

The 2470 High Voltage SourceMeter® Source Measure Unit (SMU) Instrument brings advanced Touch, Test, Invent® technology right to your fingertips. It combines an innovative graphical user interface (GUI) with capacitive touchscreen technology to make testing intuitive and minimize the learning curve to help engineers and scientists learn faster, work smarter, and invent easier. With its 1100 V and 10 fA capability, the 2470 is optimized for characterizing and testing high voltage, low leakage devices, materials, and modules, such as silicon carbide (SiC), gallium nitride (GaN), power MOSFETs, transient suppression devices, circuit protection devices, power modules, batteries, and much more. These new capabilities, combined with Keithley’s decades of expertise in developing high precision, high-accuracy SMU instruments, make the 2470 a “go-to instrument” for high-voltage source and low-current measurement applications in the lab and in the test rack.

2001 SPECIFIED CALIBRATION INTERVALS

Key Features

  • Wide coverage up to 1100 V / 1 A DC 20 W max.
  • 10 fA measure resolution
  • 0.012% basic measure accuracy with 6½-digit resolution
  • Five-inch, high resolution capacitive touch screen GUI
  • Source and sink (4-quadrant) operation
  • SCPI and TSP® scripting programming modes
  • TSP-Link for multi-channel I-V testing
  • Front panel input banana jacks; rear panel high-voltage input triaxial connections
  • Built-in context-sensitive help
  • Front-panel USB 2.0 memory I/O port for transferring data, test scripts, and test configurations

Learn Faster; Work Smarter;Invent Easier

The 2470 features a five-inch, full-color, high resolution touchscreen that supports intuitive operation, helps operators become familiar with the instrument quickly, and optimizes overall speed and productivity. A simple icon-based menu structure reduces the number of steps required to configure a test by as much as 50 percent and eliminates the cumbersome multi-layer menu structures typically used on soft-key instruments. Built-in, contextsensitive help supports intuitive operation and minimizes the need to review a separate manual. These capabilities, combined with the 2470’s high versatility, simplify its operation in both basic and advanced measurement applications, regardless of the user’s previous experience in working with SMU instruments.

2001 SPECIFIED CALIBRATION INTERVALS
2470 main home screen.
2001 SPECIFIED CALIBRATION INTERVALS
2470 icon-based menu.

All-in-One SMU Instrument

The 2470, Keithley’s fourth generation of SourceMeter SMUs, leverages the proven capabilities of the original 2410 High Voltage SourceMeter SMU Instrument. SMU instruments offer a highly flexible, four-quadrant voltage and current source/load coupled with precision voltage and current measurements. This all-in-one instrument has the capabilities of a:

  • Precision power supply with V and I readback
  • True current source
  • Digital multimeter (DCV, DCI, ohms, and power with 6½-digit resolution)
  • Precision electronic load
  • Trigger controller
2001 SPECIFIED CALIBRATION INTERVALS
2470 power envelope.

Ease of Use Beyond the Touchscreen

In addition to its five-inch color touchscreen, the 2470 front panel offers a variety of features that enhance its speed, user-friendliness, and learnability, including a USB 2.0 memory I/O port, a HELP key, a rotary navigation/control knob, a front/rear input terminal selector button, and banana jacks for basic bench applications. The USB 2.0 memory port simplifies storing test results and instrument configurations, uploading test scripts into the instrument, and installing system upgrades. All front-panel buttons are backlit to enhance visibility in low-light environments.

2001 SPECIFIED CALIBRATION INTERVALS
2470 front panel with high-resolution, capacitive touchscreen.

Four Quick Setup modes simplify instrument setup. With one touch, the instrument can be quickly configured for various operating modes without the need to configure the instrument indirectly for this operation.

2001 SPECIFIED CALIBRATION INTERVALS
One-touch Quickset modes speed measurement setups and minimize the time to measurements.

Comprehensive Built-in Connectivity

Rear panel access to rear-input connectors, remote control interfaces (GPIB, USB 2.0, and LXI/Ethernet), a D-sub 9-pin digital I/O port (for internal/external trigger signals and handler control), instrument interlock connector, and TSP-Link® connectors make it simple to configure multiple instrument test solutions and eliminate the need to invest in additional adapter accessories.

2001 SPECIFIED CALIBRATION INTERVALS
Rear panel connections are optimized for signal integrity and speed system setup.

Convert Raw Data to Information

A full graphical plotting window converts raw data and displays it immediately as useful information, such as semiconductor I-V curves and waveforms. Using the 2470’s Sheet view, test data can also be displayed in tabular form. The instrument supports exporting data to a spreadsheet for further analysis, dramatically improving productivity for research, benchtop testing, device qualification, and debugging.

2001 SPECIFIED CALIBRATION INTERVALS
Built-in data display, charting, and spreadsheet export functions simplify converting test results into useful information.

TriggerFlow® Building Blocks for Instrument Control and Execution

The 2470 incorporates Keithley’s TriggerFlow triggering system, which provides user control of instrument execution. TriggerFlow diagrams are created in much the same way that flow charts are developed, using four building blocks:

  • Wait – Waits for an event to occur before the flow continues
  • Branch – Branches when a condition has been satisfied
  • Action – Initiates an action in the instrument, for example, measure, source, delay, set digital I/O, etc.
  • Notify – Notifies other equipment that an event has occurred
2001 SPECIFIED CALIBRATION INTERVALS
TriggerFlow building blocks allow creating triggering models that range from very simple to highly complex.

A TriggerFlow model using a combination of these building blocks can be created from the front panel or by sending remote commands. With the TriggerFlow system, users can build triggering models from very simple to complex with up to 63 block levels. The 2470 also includes basic triggering functions, including immediate, timer, and manual triggering.

Unmatched System Integration and Programming Flexibility

When a 2470 is configured into a multi-channel I-V test system, its embedded Test Script Processor (TSP®) allows it to run test scripts, so users can create powerful measurement applications with significantly-reduced development times. TSP technology also offers channel expansion without a mainframe. Keithley’s TSP-Link® channel expansion bus can connect multiple 2470s and other TSP instruments, including Keithley’s other graphical SourceMeter instruments (2450, 2460, 2461), Keithley’s DMM7510, DMM6500, and DAQ6510 graphical multimeters, Series 2600B System SourceMeter SMU instruments, and Series 3700A Switch/Multimeter systems, in a master-subordinate configuration that operates as one integrated system. The TSP-Link expansion bus supports up to 32 units per GPIB or IP address, making it easy to scale a system to fit an application’s particular requirements.

Parallel Test Capability

The TSP technology in the 2470 supports testing multiple devices in parallel to meet the needs of device research, advanced semiconductor lab applications, and even high throughput production test. This parallel testing capability allows each instrument in the system to run its own complete test sequence, creating a fully multi-threaded test environment. The number of tests that can be run in parallel on a graphical SourceMeter can be as high as the number of instruments in the system.

2001 SPECIFIED CALIBRATION INTERVALS
The 2470 is the ideal addition to your development bench for designing today’s high power devices and components.
2001 SPECIFIED CALIBRATION INTERVALS
KickStart start-up software lets users be ready to make measurements in minutes.

Typical Applications

Ideal for current/voltage characterization and functional test of a wide range of today’s modern electronics and devices, including:

  • Devices
    • – Power semiconductors and materials: SiC,GaN, power MOSFETs, power diodes
    • – IGBT
    • – Thyristors, SCRs
    • – Transient suppression devices
    • – Circuit protection devices: TVS, MOVs,fuses, etc.
    • – Connectors, switches, relays
    • – Power management modules
    • – Batteries
  • Tests
    • – I-V characterization
    • – Forward voltage
    • – Breakdown voltage
    • – Leakage current
    • – Isolation
    • – Hi-Pot
    • – Dielectric withstanding
2001 SPECIFIED CALIBRATION INTERVALS
KickStart start-up software lets users be ready to make measurements in minutes.

Instrument Control Start-up Software

KickStart instrument control/start-up software enables users to start making measurements in minutes withoutprogramming. In most cases, users merely need to make some quick measurements, graph the data, and store the data to disk for later analysis in software environments such as Excel. KickStart offers:

  • Configure and control up to four SMU instruments for DC or Pulsed I-V test in either the same app, same project, or a combination of the two.
  • Create tests by mixing any of these SMU instruments:2400 Graphical Series, 2400 Standard Series (DC only), 2600B Series, 2651A, 2657A, and 6430 SourceMeter®SMU (DC only) instruments.
  • Differentiate SMU instrument channels and their measurement data using labels that are relevant to your device or module.
  • Native X-Y graphing, panning, and zooming; screenshot capturing of graphs.
  • Spreadsheet/tabular viewing of data; export data for further analysis.
  • Annotating of tests; save test setups.
  • GPIB, USB 2.0, Ethernet compliance.

Optional Apps Tailored for your Characterization Needs

The 2470 is an excellent tool to define nearly any DC test you choose for characterizing materials, electronic devices and modules. For more specific needs, Keithley offers oninstrument software apps that alter the 2470’s behavior, fitting your instrument to your needs. These apps can be installed directly to your 2470 by connecting to Keithley’s KickStart instrument control software and opening the relevant app in KickStart.

I-V Tracer App

Curve tracing analysis is a critical task for many users in the semiconductor development supply chain. Engineers and technicians both hold the traditional curve tracer as the simplest, fastest method for generating characteristic I-V curves on a device. They are heavily used by engineers in failure analysis and incoming inspection to qualify parts, identify counterfeit devices, and to quickly identify the location of a failure on damaged devices. SMUs have typically been limited to predefined sweeps with longer set up times than curve tracers — until I-V Tracer.

Keithley’s I-V Tracer app leverages the touchscreen and front-panel knob of the 2470 to allow precise, live control over the SMU output while viewing I-V results of 2 terminal devices. At each individual output level current and voltage are measured and plotted. The small footprint of the SMU enables portable bench top use, reserving high power (kW) traditional curve tracers for special cases. The power envelope of the 2470 allows it to comfortably operate in the low power range of traditional curve tracers like the Tektronix 576 and Tektronix 370A, while offering enhanced low current measurements.

2001 SPECIFIED CALIBRATION INTERVALS
I-V Tracer home screen

Once installed, I-V Tracer exists on the SMU itself, meaning I-V tracer can be used wherever your SMU can go, without a continuous remote connection. It can also integrate with KickStart to enable simple data collection and comparison on the PC, simplifying the preparation of reports used in failure analysis or teaching labs at colleges and universities.

I-V Tracer capabilities with the 2470:

  • Use the full power envelope of the 2470 (max 1000 V or 1 A)
  • 1000 V range allows careful tracing into reverse breakdown behavior
  • Trace by sourcing voltage or current, positive or negative
  • 2 or 4-wire sense
  • Compare mode for verifying against a reference device
  • Reading table view to see exact measurements
  • Easily copy curves and settings to your PC with KickStart

Simplified Programming with Ready-to-Use Instrument Drivers

For those who prefer to create their own customized application software, native National Instruments LabVIEW® drivers, and IVI-C and IVICOM drivers are available at tek.com/keithley

Voltage Specifications1, 2,
Source Measure3
Range4 Resolution Accuracy5 23 °C ± 5 °C,
1 Year ±(% setting + volts)
Noise (RMS)<10 Hz Resolution Input Resistance Accuracy 23 °C ± 5 °C,
1 Year ±(% reading + volts)
200.0000 mV 5 µV 0.015% + 200 µV 2 µV 100 nV > 10 GΩ 0.012% + 200 µV
2.000000 V 50 µV 0.020% + 300 µV 10 µV 1 µV > 10 GΩ 0.012% + 300 µV
20.00000 V 500 µV 0.015% + 2.4 mV 100 µV 10 µV > 10 GΩ 0.015% + 1 mV
200.0000 V 5 mV 0.015% + 24 mV 1 mV 100 µV > 10 GΩ 0.015% + 10 mV
1000.000 V 50 mV 0.02% + 100 mV 20 mV 10 mV > 10 GΩ 0.015% + 50 mV

Temperature Coefficient 20 V and 1000 V ranges: ± (0.15 × accuracy specification)/°C, 0 °C to 18 °C and 28 °C to 50 °C
200 mV and 2 V ranges: ±(0.30 x accuracy specification)/°C, 0 °C to 18 °C and 28 °C to 50 °C


Current Specifications1, 2
Source Measure3
Range4 Resolution Accuracy523 °C ± 5 °C,
1 Year ±(% setting + amps)
Noise (RMS)<10 Hz Resolution Voltage Burden Accuracy23 °C ± 5 °C,
1 Year ±(% reading + amps)
10.00000 nA6 500 fA 0.100% + 200 pA 500 fA 10 fA <100 µV 0.10% + 250 pA
100.0000 nA6 5 pA 0.060% + 250 pA 500 fA 100 fA <100 µV 0.060% + 300 pA
1.000000 μA 50 pA 0.025% + 400 pA 5 pA 1 pA < 100 µV 0.025% + 300 pA
10.00000 μA 500 pA 0.025% + 1.5 nA 40 pA 10 pA <100 µV 0.025% + 700 pA
100.0000 μA 5 nA 0.020% + 15 nA 400 pA 100 pA <100 µV 0.02% + 6 nA
1.000000 mA 50 nA 0.020% + 150 nA 5 nA 1 nA <100 µV 0.02% + 60 nA
10.00000 mA 500 nA 0.020% + 1.5 μA 40 nA 10 nA <100 µV 0.02% + 600 nA
100.0000 mA 5 μA 0.025% + 15 μA 100 nA 100 nA <100 µV 0.025% + 6 μA
1.000000 A 50 μA 0.067% + 900 μA 10 μA 1 μA <100 µV 0.03% + 500 μA

Temperature Coefficient ± (0.15 × accuracy specification)/°C, 0 °C to 18 °C and 28 °C to 50 °C


Notes

1. Speed = 1 PLC.

2. All specifications are guaranteed with output ON.

3. Accuracies apply to 2-wire and 4-wire modes when properly zeroed. For the 200 mV and 1 A ranges, the voltage burden may exceed the specification in 2-wire mode.

4. Maximum display and programming ranges are 5% overrange for voltage, except for the 1000 V range, which is 10% overrange (1100 V), and 5% overrange for current (for example,1.05 A on the 1 A range).

5. For sink mode, 1 µA to 100 mA range, accuracy is ±(0.5% + offset × 3). For 1 A range, accuracy ± (0.15% x accuracy specification))/°C on 20 V and 1000 V ranges ±(1.5% + offset × 3) .

6. Rear-panel triaxial connections only


Resistance Measurement Accuracy (Local Or Remote Sense)7, 8, 9
Range Default Resolution10 Default Test Current Normal Accuracy 23 °C ± 5 °C,
1 Year ± (% reading + ohms)
Enhanced Accuracy11 23 °C ± 5 °C,
1 Year ± (% reading + ohms)
< 2.000000 Ω12 1 µΩ User-defined Source IACC+ Meas VACC Meas IACC + Meas VACC
20.00000 Ω 10 µΩ 100 mA 0.098% + 0.003 Ω 0.073% + 0.001 Ω
200.0000 Ω 100 µΩ 10 mA 0.077% + 0.03 Ω 0.053% + 0.01 Ω
2.000000 kΩ 1 mΩ 1 mA 0.066% + 0.3 Ω 0.045% + 0.1 Ω
20.00000 kΩ 10 mΩ 100 µA 0.063% + 3 Ω 0.043% + 1 Ω
200.0000 kΩ 100 mΩ 10 µA 0.065% + 30 Ω 0.046% + 10 Ω
2.000000 MΩ 1 Ω 1 µA 0.11% + 300 Ω 0.049% + 100 Ω
20.00000 MΩ 10 Ω 1 µA 0.11% + 1 kΩ 0.052% + 500 Ω
200.0000 MΩ 13 100 Ω 100 nA 0.655% + 10 kΩ 0.349% + 5 kΩ
>200.0000 MΩ12, 13 - User-defined Source IACC+ Meas VACC Meas IACC+ Meas VACC
Temperature Coefficient ± (0.15 × accuracy specification)/°C 0 °C to 18 °C and 28 °C to 50 °C
Source Current, Measure Resistance Mode Total uncertainty = I source accuracy + V measure accuracy (4-wire remote sense)
Source Voltage, Measure Resistance Mode Total uncertainty = V source accuracy + I measure accuracy (4-wire remote sense)
Guard Output Impedance ≥ 300 Ω typical

Notes

7. Speed = 1 PLC.

8. All specifications are guaranteed with output ON.

9. Accuracies apply to 2-wire and 4-wire modes when properly zeroed.

10. Measure resolution 6.5 digits.

11. Source readback enabled; offset compensation on.

12. Source current, measure resistance or source voltage, measure resistance only.

13. Rear-panel triaxial connections only.


Supplemental Specifications
Overrange 105% of range for 200 mV to 200 V, source and measure ranges; 110% of range for 1000 V, source and measure ranges
Regulation
    Voltage Line: 0.01% of range
Load: 0.01% of range + 100 µV
  
    Current Line: 0.01% of range
Load: 0.01% of range + 100 pA
Source Limits
    Voltage Source Current Limit Bipolar current limit set with a single value
Minimum value is 10% of range
  
    Current Source Voltage Limit Bipolar voltage limit set with a single value
Minimum value is 10% of range
Voltage Limit/Current Limit Accuracy Add 0.3% of range and ±0.02% of reading to base specification
Overshoot
    Voltage Source <0.1% typical
Step size = Full scale, resistive load, 20 V range, 10 mA current limit
  
    Current Source <0.1% typical
Step size = Full scale, resistive load of 10 kΩ, 1 mA range, 20 V voltage limit
Range Change Overshoot Overshoot into a fully resistive 100 kΩ load, 10 Hz to 20 MHz bandwidth, adjacent ranges: 250 mV typical
Output Settling Time Time required to reach 0.1% of final value after command is processed and output slew: 20 V range,100 mA current limit: < 200 µs typical
Maximum Slew Rate14 0.2 V/µs, 200 V range, 100 mA limit into a 2 kΩ load (typical)
0.5 V/µs, 1000 V range, 10 mA limit into a 100 kΩ load (typical)
Overvoltage Protection User-selectable values, 10% tolerance; factory default = none
Voltage Source Noise 10 Hz to 20 MHz (RMS): 4 mV typical into a resistive load
Common Mode Voltage 250 V DC
Common Mode Isolation > 1 GΩ, < 1000 pF
Noise Rejection (typical)
NPLC NMRR CMRR
0.01 - 60 dB
0.1 - 60 dB
1 60 dB 100 dB*

* Except lowest two current ranges ~90dB.

Load Impedance
    Normal Mode 20 nF typical
  
    High-Capacitance Mode Stable into 1 μF typical (specification only valid for ranges ≥100 μA)
Maximum Voltage Drop Between Force and Sense Terminals 5 V
Maximum Sense Lead Resistance 1 MΩ for rated accuracy
Sense Input Impedance > 10 GΩ
Guard Offset Voltage < 300 µV typical

Notes

14. High capacitance mode off.


System Measurement Speeds15

Reading rates (readings per second) typical for 60 Hz (50 Hz), script (TSP) programmed

NPLC Trigger Origin Measure to Memory Measure to GPIB Measure to USB Measure to LAN Source Measure Sweep to Memory Source measure sweep to GPIB Source Measure Sweep to USB Source Measure Sweep to LAN
0.01 Internal 3150 (2800) 2760 (2570) 2825 (2570) 2740 (2530) 1710 (1620) 1620 (1540) 1630 (1540) 1620 (1540)
0.01 External 2170 (2050) 2120 (2003) 2170 (2010) 2100 (1990) 1670 (1590) 1580 (1500) 1590 (1510) 1580 (1510)
0.10 Interna 540 (460) 530 (450) 530 (450) 530 (450) 470 (410) 460 (400) 470 (400) 470 (400)
0.10 External 500 (430) 490 (420) 500 (425) 480 (420) 450 (400) 460 (390) 460 (390) 410 (350)
1.00 Internal 59 (49 58 (49) 59 (49) 59 (49) 58 (48) 58 (48) 58 (48) 57 (48)
1.00 External 58 (48) 57 (48) 58 (48) 58 (48) 57 (48) 57 (48) 57 (48) 55 (48)

Reading rates (readings per second) typical for 60 Hz (50 Hz), SCPI programmed16

NPLC Trigger Origin Measure to Memory Measure to GPIB Measure to USB Measure to LAN Source Measure Sweep to memory Source Measure Sweep to GPIB Source Measure Sweep to USB Source Measure Sweep to LAN
0.01 Internal 3040 (2800) 3000 (2760) 3000 (2760) 3010 (2710) 1710 (1630) 1610 (1544) 1440 (1380) 1690 (1590)
0.01 External 2320 (2165) 2290 (2140) 2340 (2150) 2290 (2130) 1680 (1590) 1560 (1525) 1410 (1360) 1660 (1560)
0.10 Internal 540 (460) 540 (450) 540 (460) 540 (450) 540 (410) 470 (410) 450 (390) 470 (410)
0.10 External 510 (440) 510 (430) 510 (440) 510 (430) 470 (400) 470 (400) 450 (390) 470 (400)
1.00 Internal 59 (49) 59 (49) 59 (49) 59 (49) 58 (48) 58 (48) 57 (48) 58 (48)
1.00 External 58 (49) 58 (49) 58 (49) 58 (49) 58 (49) 58 (48) 57 (47) 58 (48)

Notes

15. Reading rates applicable for voltage or current measurements, autozero off, autorange off, filter off, binary reading format, and source readback off.

16. SCPI programming mode.


General Characteristics (default mode unless specified)

Factory Default Standard Power-Up SCPI Mode
Source Output Modes Fixed DC Level, Memory/Configuration List (mixed function), Stair (linear and log).
Memory Buffer >5,000,000 readings with selected measured values and timestamp.
Real-Time Clock Lithium battery backup (3 yr. + battery life).
Remote Interfaces
GPIB IEEE-488.1 compliant. Supports IEEE-488.2 common commands and status model topology.
USB Device (rear panel, type B) 2.0 Full Speed USBTMC.
USB Host (front panel, type A) USB 2.0, support for flash drives, FAT32.
Ethernet RJ-45 (10/100BT).
Digital I/O Interface:
Lines 6 Input/Output user defined for digital I/O or triggering.
Connector 9-pin female D.
Input Signal Levels 0.7 V (maximum logic low), 3.7 V (minimum logic high).
Input Voltage Limits -0.25 V (Abs. minimum), +5.25 V (Abs. maximum).
Maximum Source Current +2.0 mA @ >2.7 V (per pin).
Maximum Sink Current -50 mA at 0.7 V (per pin, solid-state fuse protected)
5V Power Supply Pin Limited to 500 mA @ >4 V (solid-state fuse protected).
Handler User definable Start of Test, End of Test, 4 category bits.
Programmability SCPI or TSP command sets.
TSP Mode Embedded Test Script Processor (TSP) accessible from any host interface.
IP Configuration Static or DHCP.
Expansion Interface The TSP-Link expansion interface allows TSP enabled instruments to trigger and communicate with each other.
LXI Compliance 1.5 LXI Device Specification 2016.
Display 5 inch capacitive touch, color TFT WVGA (800×480) with LED backlight.
Input Signal Connections Front: Banana. Rear: High-voltage triaxia.
Interlock Active High Input.
Cooling Forced air, variable speed.
Over Temperature Protection Internally sensed temperature overload puts unit in standby mode.
Power Supply 100 V to 240 V RMS, 50–60 Hz (automatically detected at power up).
VA Rating 190 volt-amps max.
Altitude Maximum 2000 meters above sea level.
EMC Conforms to European Union EMC Directive.
Safety NRTL listed to UL61010-1 and UL61010-2-30. Conforms with European Union Low Voltage Directive.
Vibration MIL-PRF-28800F Class 3 Random.
Warm-Up 1 hour to rated accuracies.
Dimensions With bumpers and handle: 106 mm high × 255 mm wide × 425 mm deep (4.18 in × 10.05 in × 16.75 in).
Without bumpers and handle: 88 mm high × 213 mm wide × 403 mm deep (3.46 in × 8.39 in × 15.87 in.)
Weight With bumpers and handle: 4.54 kg (10 lb).
Without bumpers and handle: 4.08 kg (9.0 lb).
Environment Operating: 0 °C to 50 °C, 70% relative humidity up to 35 °C; derate 3% relative humidity/°C, 35 °C to 50 °C.
Storage: -25 °C to 65 °C.
Pollution Category: 2

SourceMeter® is a registered trademark of Keithley Instruments LLC. All other trademarks are the property of their respective owners.

Ordering Information

2470 1000 V, 1 A, 20 W SourceMeter SMU Instrument

Supplied Accessories

8608 High Performance Test Leads
USB-B-1 USB Cable, Type A to Type B, 1 m (3.3 ft)
CS-1616-3 Safety Interlock Mating Connector
17469460X TSP-Link/Ethernet Cable
Documentation available at www.tek.com/keithley
2470 QuickStart Guide
Test Script Builder Software (available at www.tek.com/keithley)
LabVIEW and IVI Drivers (available at www.tek.com/keithley)

Available Accessories

Probe
8606 High Performance Modular Probe Kit
Cables, Connectors, Adapters
TRX-1100V-BAN HV Triax to Banana Adapter. Converts the 4 triax connectors on the rear panel to 5 banana jacks
TRX-1100V-* 3-slot HV Low Noise Triax Cable (0.5 m, 1 m, 2 m, 3 m lengths available)
TRX-1100V-CONN 3-Slot HV Male Triax Cable Connector
TRX-1100V-PCBCONN 3-Slot HV Female Triax PC Board Mount Connector
TRX-1100V-FFBARREL 3-Slot 1100 V Triax FemaleE to Female Barrel Interconnect
TRX-1100V-FMFTEE 3-Slot 1100 V Triax Male to Dual Female Tee Adapter
TRX-1100V-FFFTEE 3-Slot 1100 V Triax Female to Dual Female Tee Adapter
TRX-1100V-TBC 3-Slot 1100 V Triax Female Bulkhead Connector
CS-1616-3 Safety Interlock Mating Connector
Communication Interfaces and Cables
7007-1 Shielded GPIB Cable, 1 m (3.3 ft)
KPCI-488LPA IEEE-488 Interface for PCI Bus
KUSB-488B IEEE-488 USB-to-GPIB Interface Adapter
Rack Mount Kits
4299-8 Single Fixed Rack Mount Kit
4299-9 Dual Fixed Rack Mount Kit
Software Options
I-V Tracer Graphical SMU Curve Tracer Software
Kickstart Instrument Control Software

Available Services

2470-3Y-EW 1 Year Factory Warranty extended to 3 years from date of shipment
2470-5Y-EW 1 Year Factory Warranty extended to 5 years from date of shipment
C/2470-3Y-17025 KeithleyCare® 3 Year ISO 17025 Calibration Plan
C/2470-3Y-DATA KeithleyCare 3 Year Calibration w/Data Plan
C/2470-3Y-STD KeithleyCare 3 Year Std. Calibration Plan
C/2470-5Y-17025 KeithleyCare 5 Year ISO 17025 Calibration Plan
C/2470-5Y-DATA KeithleyCare 5 Year Calibration w/Data Plan
C/2470-5Y-STD KeithleyCare 5 Year Std. Calibration Plan
C/NEW DATA Calibration Data for New Units
C/NEW DATA ISO ISO-17025 Calibration Data for New Units

Warranty Information

Warranty Summary This section summarizes the warranties of the 2470. For complete warranty information, refer to the Tektronix warranty page at www.tek.com/service/warranties/warranty-2. Any portion of the product that is not manufactured by Keithley is not covered by this warranty and Keithley will have no duty to enforce any other manufacturer's warranties.
Hardware Warranty Keithley Instruments, Inc. warrants the Keithley manufactured portion of the hardware for a period of one year from defects in materials or workmanship; provided that such defect has not been caused by use of the Keithley hardware which is not in accordance with the hardware instructions. The warranty does not apply upon any modification of Keithley hardware made by the customer or operation of the hardware outside the environmental specifications.
Software Warranty Keithley warrants for the Keithley produced portion of the software or firmware will conform in all material respects with the published specifications for a period of ninety (90) days; provided the software is used on the product for which it is intended in accordance with the software instructions. Keithley does not warrant that operation of the software will be uninterrupted or error-free, or that the software will be adequate for the customer's intended application. The warranty does not apply upon any modification of the software made by the customer.