연락처
텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능
전화
전화 문의
9:00am-6:00PM KST에 이용 가능
다운로드
매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.
피드백
PSPL5350 6 dB Power Divider, 50 GHz
PSPL5350 Datasheet
이 데이터 시트의 제품은 텍트로닉스에서 더 이상 판매하지 않습니다.
리퍼브 테스트 장비에 대한 Tektronix Encore를 확인하십시오.
이러한 제품에 대한 지원 및 보증 상태를 살펴보십시오.
The PSPL5350 6 dB Power Divider provides excellent amplitude and phase performance power division from DC to frequencies over 40 GHz. The outputs are nominally attenuated by 6 dB. All ports are impedance matched to 50 Ω when both outputs are terminated in 50 Ω. Power dividers are built using a three-resistor network. The resistors have 1% tolerances, resulting in precise 50 Ω impedance matches at any port. This divider is engineered to provide excellent amplitude and phase symmetry throughout the operating range, regardless of port selection. Maximum division symmetry is obtained when port 1 is used as input, with ports 2 and 3 providing the divided signal output.
Typical performance
Frequency responses from 40 MHz to 40 GHz, liniear sweep at 4 GHz/div
Specifications
| Parameter 1 | Value |
|---|---|
| Rise time | 8 ps, typical |
| Insertion Loss BW (-1.5 dB) | DC to >40 GHz |
| Insertion Loss, DC | 6.02 ± 0.08 dB max, DC |
| Insertion Loss, AC | 5.8 |
| Insertion Loss Asymmetry | 0.05 dB maximum, DC
|
| Phase Tracking | |
| Delay | 100 ps, typical |
| Input Impedance, DC | 50 ± 0.5 Ω max |
| Return Loss | >30 dB, 0 – 1 GHz
>17 dB, 1 – 15 GHz >12.5 dB, 15 – 40 GHz |
| Max Input Power, avg | 2.5 Watts, CW |
| Temperature Range | -55 to 90 °C @ 2.5 W, operating case temperature
linearly derated to 0 W @ 110 °C |
| Warranty | One Year |
- Mechanical dimensions
1 All parameters listed are typical unless max/min guaranteed limits are provided. The DC specs are based upon resistor tolerances and only when used with 50 Ω source and terminations.
Ordering information
Models
- PSPL5350
- Power Divider, 6 dB
Options
- PSPL5350 240JJJ
- 2.4 mm connectors, jacks (f)
- PSPL5350 292JJJ
- 2.92 mm connectors, jacks (f)