Arbitrary Waveform Generators: AWG4000 Series Datasheet

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Definitions

Specifications (not noted)

Product characteristics described in terms of specified performance with tolerance limits which are warranted/guaranteed to the customer. Specifications are checked in the manufacturing process and in the Performance Verification section of the product manual with a direct measurement of the parameter.

Typical (noted)

Product characteristics described in terms of typical performance, but not guaranteed performance. The values given are never warranted, but most units will perform to the level indicated. Typical characteristics are not tested in the manufacturing process or the Performance Verification section of the product manual.

Nominal (not noted)

Product characteristics described in terms of being guaranteed by design. Nominal characteristics are non-warranted, so they are not checked in the manufacturing process or the Performance Verification section of the product manual.

Model overview

Operation modes

Basic

DDS mode

Standard waveforms

Sine, Square, Pulse, Ramp, more (Noise, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine)

Run modes

Continuous, modulation, sweep, burst

Arbitrary waveforms

Sampling clock: 2.5 GS/s, fixed

Vertical resolution: 14-bit

Waveform length: 16,384 points

Advanced

AWG mode

Run modes

Continuous, sequencer, triggered, gated

Sampling clock

100 S/s to 2.5 GS/s, variable

Vertical resolution

14-bit

Waveform length

64 to 64 M points (1 M = 2²⁰) in multiple of 64 points for length < 320 points, in multiple of 16 points for length ≥ 320 points

Standard: 1 M points

Optional: 16 M, 32 M, 64 M points

Sequence length

1 to 16,384 entries

Sequence control

Repeat Waveform, Wait for Multiple Triggers (up to 7 triggers), Wait for Multiple Events (up to 7 events), Jump if Event (up to 7 events, synchronous or asynchronous), Jump to (synchronous or asynchronous)

Repeat count

1 to 2,097,151 or infinite

Jump timing

Synchronous or asynchronous

Digital waveform

Standard: 0-bit

Optional: 16 or 32-bit

Built-in standard waveforms

DC, Sine, Cosine, Triangle, Rectangle, Sawtooth, Increase-ramp, Decrease-ramp, Pulse, Sinc, Exponential, Sweep

Arbitrary waveforms

Formula, file, user defined

Additional

Noise, filter can be applied to the waveforms above

General characteristics - Basic mode

Connectors

SMAs for DC AMP on front panel

Output types

Single-ended or differential ¹

¹When using single-ended, terminate the other end with a 50 Ω SMA terminator.

Output impedance

50 Ω (Single-ended) or 100 Ω (differential)

Frequency range

Sine

1 μHz to 600 MHz

Square

1 μHz to 330 MHz

Pulse

1 μHz to 330 MHz

Ramp, Exponential Rise, Exponential Decay

1 μHz to 30 MHz

Sin(x)/X, Gausian, Lorentz, Haversine

1 μHz to 60 MHz

Arbitrary

1 μHz to 400 MHz

Frequency resolution

sine, square, pulse, arbitrary

1 μHz or 15 digits

Ramp, Sin(x)/X, Gausian, Lorentz, Exponential Rise, Exponential Decay, Haversine

1 μHz or 14 digits

Frequency accuracy

non-ARB

±10^-6 of setting

ARB

±10^-6 of setting ±1 μHz

Sine waves

Flatness (1 V_p-p, relative to 1 kHz)

DC to 600 MHz : ±0.5 dB

Harmonic Distortion (1 V_p-p)

1 μHz to ≤ 10 MHz: < -60 dBc

> 10 MHz to ≤ 50 MHz: < -55 dBc

> 50 MHz to ≤ 200 MHz: < -40 dBc

> 200 MHz to ≤ 600 MHz: < -28 dBc

Total Harmonic Distortion (1 V_p-p, typical)

10 Hz to 20 kHz: < 0.1%

Spurious (1 V_p-p)

1 μHz to ≤ 10 MHz: < -65 dBc

>10 MHz to ≤ 330 MHz: < -55 dBc

> 330 MHz to ≤ 500 MHz: < -50 dBc

> 500 MHz to ≤ 600 MHz: < -40 dBc

Phase Noise (1 V_p-p, 10 kHz offset, typical)

1 MHZ: < -115 dBc/Hz

10 MHZ: < -110 dBc/Hz

100 MHZ: < -105 dBc/Hz

600 MHZ: < -90 dBc/Hz

Square waves

Rise/fall time (typical)

1 ns

Overshoot (1 V_p-p, typical)

< 2%

Jitter (rms, typical)

50 ps

Pulse waves

Pulse width

1 ns to (Period - 1 ns)

Resolution

10 ps or 15 digits

Pulse duty

0.1% to 99.9% (limitations of pulse width apply)

Leading/trailing edge transition time

800 ps to 1000 s

Resolution

1 ps or 15 digits

Overshoot (1 V_p-p, typical)

< 2%

Jitter (rms, typical)

50 ps

Ramp waves

Linearity (< 10 kHz, 1 V_p-p, 100% Symmetry, typical)

≤ 0.1%

Symmetry

0% to 100%

Other waves

Noise bandwidth (-3 dB, typical)

400 MHz

Noise add

When activated, output signal amplitude is reduced to 50%

Level

0.0% to 50% of amplitude (V_p-p) setting

Resolution

0.1%

Arbitrary

Number of samples

2 to 16,384 

Analog bandwidth (-3 dB, typical)

400 MHz

Rise/fall time (typical)

≤ 800 ps

Jitter (rms, typical)

400 ps

DC

Range (50 Ω, single-ended)

-2.5 V to 2.5 V

Accuracy

±(1% of |setting| + 5 mV)

Amplitude

Range (50 Ω, single-ended)

1 μHz ~ 350 MHz: 5 mV_p-pto 5 V_p-p

350 MHz ~ 550 MHz: 5 mV_p-pto 3 V_p-p

550 MHz ~ 600 MHz: 5 mV_p-pto 2 V_p-p

Range (100 Ω, differential)

1 μHz ~ 350 MHz: 10 mV_p-pto 10 V_p-p

350 MHz ~ 550 MHz: 10 mV_p-pto 6 V_p-p

550 MHz ~ 600 MHz: 10 mV_p-pto 4 V_p-p

Accuracy (1 kHz sine wave, 0 V offset, > 5 mV_p-p amplitude, 50 Ω load)

±(1% of setting + 5 mV)

Resolution

1 mV_p-p or 4 digits

Units

V_p-p, V_rms, dBm (sine wave only), Volt (high/low settings)

Output impedance

Single-ended: 50 Ω

Differential: 100 Ω

Isolation

No isolation, all SMA and BNC connectors are connected to earth ground directly

Vocm

Range (50 Ω load, single-ended)

-2.5 V to +2.5 V

Range (High Z load, single-ended)

-5 V to +5 V

Accuracy (50 Ω load, single-ended)

±(1% of |setting| ±5 mV)

Resolution

1 mV or 4 digits

Offset

Range (50 Ω load, single-ended)

±(2.5 Vpk - Amplitude ÷ 2)

Range (High Z load, single-ended)

±(5 Vpk - Amplitude ÷ 2)

Accuracy (50 Ω load, single-ended)

±(1% of |setting| + 5 mV)

Resolution

1 mV or 4 digits

Window

Range (50 Ω, single-ended)

1 μHz ~ 350 MHz: -5 V to +5 V

350 MHz ~ 550 MHz: -4 V to +4 V

550 MHz ~ 600 MHz: -3.5 V to +3.5 V

Range (100 Ω, differential)

1 μHz ~ 350 MHz: -10 V to +10 V

350 MHz ~ 550 MHz: -8 V to +8 V

550 MHz ~ 600 MHz: -7 V to +7 V

Range (High Z, single-ended)

1 μHz ~ 350 MHz: -10 V to +10 V

350 MHz ~ 550 MHz: -8 V to +8 V

550 MHz ~ 600 MHz: -7 V to +7 V

Phase

Range

0⁰ to +360⁰

Accuracy (typical)

±(0.1% of setting ±0.01°)

Amplitude Modulation (AM)

Carrier waveforms

Standard waveforms (except Pulse, DC and Noise), ARB

Modulation source

Internal or external

Internal modulating waveforms

Sine, Square, Ramp, Noise, ARB

Modulating frequency

Internal: 500 μHz to 50 MHz

External: 10 MHz maximum

Depth

0.00% to 120.00%

Frequency Modulation (FM)

Carrier waveforms

Standard waveforms (except Pulse, DC and Noise), ARB

Modulation source

Internal or external

Internal modulating waveforms

Sine, Square, Ramp, Noise, ARB

Modulating frequency

Internal: 500 μHz to 50 MHz

External: 10 MHz maximum

Peak deviation

DC to 300 MHz

Phase Modulation (PM)

Carrier waveforms

Standard waveforms (except Pulse, DC and Noise), ARB

Modulation source

Internal or external

Internal modulating waveforms

Sine, Square, Ramp, Noise, ARB

Modulating frequency

Internal: 500 μHz to 50 MHz

External: 10 MHz maximum

Phase deviation range

0⁰ to 180⁰

Frequency Shift Keying (FSK)

Carrier waveforms

Standard waveforms (except Pulse, DC and Noise), ARB

Modulation source

Internal or external

Internal modulating waveforms

Square

Key rate

Internal: 500 μHz to 50 MHz

External: 10 MHz maximum

Hop frequency

1 μHz to 600 MHz

Number of keys

2 

Phase Shift Keying (PSK)

Carrier waveforms

Standard waveforms (except Pulse, DC and Noise), ARB

Modulation source

Internal or external

Internal modulating waveforms

Square

Key rate

Internal: 500 μHz to 50 MHz

External: 10 MHz maximum

Hop phase

-180° to +180°

Number of keys

2 

Pulse Width Modulation (PWM)

Carrier waveforms

Pulse

Modulation source

Internal or external

Internal modulating waveforms

Sine, Square, Ramp, Noise, ARB

Modulating frequency

Internal: 500 μHz to 50 MHz

External: 10 MHz maximum

Deviation range

0% to 50% of pulse period

Sweep

Type

Linear, Logarithmic, staircase, and user defined

Waveforms

Standard waveforms (except Pulse, DC and Noise), ARB

Sweep time

50 μs to 2000 s

Hold/return times

0 to (2000 s - 50 μs)

Sweep/hold/return time resolution

20 ns or 12 digits

Total sweep time accuracy (typical)

≤ 0.4%

Start/stop frequency range

Sine: 1 μHz to 600 MHz

Square: 1 μHz to 300 MHz

Trigger source

Internal/External/Manual

Burst

Waveforms

Standard waveforms (except DC and Noise), ARB

Type

Trigger or gated

Burst count

1 to 1,000,000 cycles or Infinite

Internal trigger delay

0 to 100 s

Internal trigger delay accuracy (typical)

±(0.1% setting + 5 ps)

Internal trigger rate

0 to 500 s

Internal trigger interval range

1 μs to 500 s

Internal trigger resolution

2 ns or 12 digits

General characteristics - Advanced mode

Analog outputs

Connector types

SMAs for AMP, DAC, and AC modes on front panel

Output types

AMP and DAC modes: single-ended or differential¹

AC mode: single-ended

Output impedance

50 Ω, single-ended

100 Ω, differential

Skew between positive and negative outputs (typical)

≤ 20 ps

¹When using single-ended, terminate the other end with a 50 Ω SMA terminator.

Skew control

(Between analog channels)

Range

0 to 240,000 ps

Resolution

10 ps

Accuracy (typical)

±(10% of setting + 20 ps)

Initial skew

< 200 ps from 1.25 GS/s to 2.5 GS/s

< 1 ns below 1.25 GS/s

Skew control

(Between analog channel and marker, analog channel to digital channels)

Range

0 to 101,790 ps

Resolution

78 ps

Accuracy (typical)

±(10% of setting + 140 ps)

Initial skew

< 1.4 ns from 1.25 GS/s to 2.5 GS/s

< 2 ns from 100 MS/s to 1.25 GS/s

< 4.5 ns below 100 MS/s

Calculated bandwidth (0.35 / rise or fall time, typical)¹

AMP

400 MHz

DAC

750 MHz

AC

750 MHz

¹Rise/fall time is 10% to 90% of transition time.

Amplitude

Range (single-ended, 50 Ω load)

AMP

0 to 5 V_p-p (doubled in case of differential or High Z load)

DAC

0 to 0.8 V_p-p (doubled in case of differential or High Z load)

AC

0 to 2 V_p-p (doubled in case of High Z load)

Accuracy

AMP, DAC (1 kHz sine, offset 0 V )

±(1% of setting + 5 mV_p-p)

AC (100 MHz sine, offset 0 V, typical )

±(2% of setting + 5 mV_p-p) - 0.1% of |setting| x temperature deviation ¹

Resolution

AMP, DAC, and AC

0.1 mV or 5 digits

¹Temperature deviation = room temperature - 23 °C, when room temperature is out of the range of 20 °C - 30 °C.

Offset

Range (single-ended, 50 Ω load)

AMP

-2.5 V to +2.5 V (doubled in case of differential or High Z load)

DAC

-0.35 V to +0.35 V (doubled in case of differential or High Z load)

Accuracy

AMP, DAC

±(1% of |setting| + 5 mV)

Resolution

AMP, DAC

10 mV or 3 digits

Vocm

Range (single-ended, 50 Ω load)

AMP

-2.5 V to +2.5 V (doubled in case of differential or High Z load)

DAC

-0.35 V to +0.35 V (doubled in case of differential or High Z load)

Accuracy

AMP

±(1% of setting + 5 mV)

DAC

±(6% of Vocm range + 5 mV)

Resolution

AMP, DAC

10 mV or 3 digits

Voltage window

Range (single-ended, 50 Ω load)

AMP

1 μHz to 300 MHz: -5 V to 5 V

> 300 MHz to 550 MHz: -4 V to 4 V

> 550 MHz to 600 MHz: -3.5 V to 3.5 V

(doubled in case of differential or High Z load)

DAC

-0.4 V to 0.4 V

(doubled in case of differential or High Z load)

AC

-1 V to 1 V

(doubled in case of High Z load)

Harmonic distortion

(Sine wave 32 points at 2.5 GS/s, 78.125 MHz, typical)

AMP (1 V_p-p single-ended)

< -56 dBc (single-ended or differential)

DAC (0.5 V_p-p single-ended)

< -60 dBc (single-ended or differential)

AC (1 V_p-p single-ended)

< -56 dBc

Spurious

(Sine wave 32 points at 2.5 GS/s, 78.125 MHz, typical)

AMP (1 V_p-p single-ended)

< -62 dBc (single-ended or differential)

DAC (0.5 V_p-p single-ended)

< -62 dBc (single-ended or differential)

AC (1 V_p-p single-ended)

< -55 dBc

SFDR

(Sine wave 32 points at 2.5 GS/s, 78.125 MHz, typical)

AMP (1 V_p-p single-ended)

< -56 dBc (single-ended or differential)

DAC (0.5 V_p-p single-ended)

< -60 dBc (single-ended or differential)

AC (1 V_p-p single-ended)

< -55 dBc

Rise/fall time

(10% to 90%, typical)

AMP

800 ps

DAC

450 ps

AC

450 ps

Overshoot (typical)

AMP

< 2%

DAC

< 1%

AC

< 2%

Level flatness (typical)

AMP (1 V_p-p Sine wave, relative to 1 kHz)

1 μHz to ≤ 10 MHz: < ±0.5 dBc

> 10 MHz to ≤ 50 MHz: < ±1 dBc

> 50 MHz to ≤ 150 MHz: < ±1.5 dBc

> 150 MHz to ≤ 300 MHz: < ±2 dBc

> 300 MHz to ≤ 350 MHz: < ±3 dBc

> 350 MHz to ≤ 400 MHz: < ±3.5 dBc

DAC (1 V_p-p Sine wave, relative to 1 kHz)

1 μHz to ≤ 10 MHz: < ±0.5 dBc

> 10 MHz to ≤ 100 MHz: < ±1 dBc

> 100 MHz to ≤ 200 MHz: < ±1.5 dBc

> 200 MHz to ≤ 300 MHz: < ±2 dBc

> 300 MHz to ≤ 350 MHz: < ±2.5 dBc

> 350 MHz to ≤ 450 MHz: < ±3 dBc

> 450 MHz to ≤ 550 MHz: < ±3.5 dBc

> 550 MHz to ≤ 650 MHz: < ±4 dBc

> 650 MHz to ≤ 750 MHz: < ±4.5 dBc

AC (1 V_p-p Sine wave, relative to 10 MHz)

10 MHz to ≤ 50 MHz: < ±0.5dBc

> 50 MHz to ≤ 150 MHz: < ±1 dBc

> 150 MHz to ≤ 200 MHz: < ±1.5 dBc

> 200 MHz to ≤ 300 MHz: < ±2 dBc

> 300 MHz to ≤ 450 MHz: < ±3 dBc

> 450 MHz to ≤ 550 MHz: < ±3.5 dBc

> 550 MHz to ≤ 650 MHz: < ±4.5 dBc

> 650 MHz to ≤ 750 MHz: < ±5 dBc

Phase noise

(Sine wave 32 points at 2.5 GS/s, 78.125 MHz, 10 kHz offset, typical)

AMP, DAC, AC

-110 dBc/Hz

Random jitter on clock pattern

(rms, typical)

AMP, DAC

< 5 ps

Total jitter on random pattern

(peak-to-peak at 625 Mb/s, PRBS 15 data pattern, typical)

AMP, DAC

< 150 ps

Digital outputs (Optional)

Connector type

FCI EYE® connector on front panel

Number of connectors

2 

Number of outputs

32-bits (16-bits x 2 groups)

Output impedance

100 Ω differential

Output type

LVDS

Rise/fall time (10% to 90%, typical)

600 ps

Initial skew between digital outputs (typical)

< 500 ps between group A and B

Jitter (peak-to-peak, 2.5 GS/s, 1.25 Gb/s, PN15 pattern, BER = 1e-12)

150 ps

Maximum update rate

1.25 Gbps (full speed mode, maximum 16-bit)

625 Mbps (low speed mode, maximum 32-bit)

Memory depth (optional)

Half of analog waveform length (full speed mode)

One fourth of analog waveform length (low speed mode)

Auxiliary input and output characteristics

Marker out

Connector type

SMA on front panel

Number of connectors

two, one for each analog output

Output impedance

50 Ω

Output level (into 50 Ω)

1 V to 2.5 V

Resolution

10 mV

Accuracy (typical)

±(2% setting + 10 mV)

Variable delay control

0 to 60606 ps

Resolution

78 ps

Accuracy (typical)

±(10% of setting + 140 ps)

Rise/fall time (10% to 90%, 2.5 V, typical)

800 ps

Total jitter on random pattern (peak-to-peak, 2.5 GS/s, 1.25 Gb/s, PN15 pattern, output level 2.5 V, BER = 1e-12)

155 ps

Trigger/Gate input

Connector

SMA on the Front Panel

Input impedance

1.1 kΩ

Slope/Polarity

Positive or negative selectable

Input damage level

< -15 V or > +15 V

Threshold control level

-10 V to 10 V

Resolution

50 mv

Threshold control accuracy (typical)

±(10% of |setting| + 0.2 V)

Input voltage swing

0.5 V_p-p minimum

Minimum pulse width

12 ns

Initial trigger/gate delay to Analog Output

Basic mode: 332.8 ns ±400 ps

Advanced mode: 20 ns + 2288 sampling clock cycles ±1 sampling clock cycle

Trigger In to output jitter (typical)

±2 sampling clock

Sync in/out

Connector type

Infiniband 4X connector on rear panel

Master to Slave delay (typical)

48.6 ns

Reference clock input

Connector type

SMA on rear panel

Input impedance

50 Ω, AC coupled

input voltage range

-5 dBm to 4 dBm sine or square wave

Damage level

+8 dBm or ±15 V_DC Max

Variable Input Frequency range

10 MHz to 80 MHz

Reference clock output

Connector type

SMA on rear panel

Output impedance

50 Ω, AC coupled

Frequency

10 MHz

Accuracy

± 1.0 x 10^-6

Aging

± 1.0 x 10^-6/year

Amplitude (typical)

1.6 V_p-pinto 50 Ω

3.2 V_p-pinto High Z

Jitter (rms, typical)

11.5 ps

External Sampling Clock input

Connector type

SMA on rear panel

Input impedance

50 Ω, AC coupled

Number of inputs

Two, one for each channel

Frequency range

1.25 GHz to 2.5 GHz

Input voltage range

-5 dBm to 4 dBm

Damage level

+8 dBm or ±15 V_DC Max

External Modulation input

Connector type

BNC on rear panel

Input impedance

10 KΩ

Number of inputs

Two, one for each channel

Bandwidth (typical)

10 MHz with 50 MS/s sampling rate

Input voltage range

-1 V to +1 V (except FSK, PSK)

FSK, PSK: 3.3 V

Vertical resolution

14-bit

CPU Module and peripherals

CPU

The 4^th generation Intel® Core™ i7/i5/i3 Processor

Memory

4 GB x 2, DDR3-DRAM

Hard disk drive

Removable hard disk drive, 500 Gbyte, 2.5-inch SATA

USB host ports

USB 2.0 x 2 on rear panel

USB 3.0 x 2 on front panel

USB device port

USB 2.0 x 1 on rear panel

Type B

LAN

10/100/1000 BASE-T on rear panel

Real time clock

CR2032 lithium battery with lifetime approximately 3 years

Display

Size

10.4 in. LCD, 210.4 mm (8.3 in.) x 157.8 mm (6.2 in.)

Resolution

1024 x 768 

Luminance (typical)

400 cd/m²

Touch screen

Built-in, resistive

Power supply

Source voltage and frequency

100 to 240 V_rms@ 50 - 60 Hz

115 V_rms@ 400 Hz

Power consumption

150 W maximum

Surge current

30 A peak (25 °C) for ≤ 5 line cycles, after product has been turned off for at least 30 s

Physical characteristics

Weight (typical)

Net weight

6.5 kg (14.2 lbs)

Net weight with packaging

11.5 kg (25.2 lbs)

Dimensions

Height

233 mm (9.17 in.)

Width

439 mm (17.28 in.)

Depth

199 mm (7.82 in.)

Dimensions with packaging (typical)

Height

498 mm (19.61 in.)

Width

457 mm (17.99 in.)

Depth

574 mm (22.60 in.)

EMC, environmental, and safety characteristics

Temperature

Operating

+5 °C to +50 °C (+41 °F to 122 °F)

Non-operating

-20 °C to +60 °C (-4 °F to 140 °F)

Humidity

Operating

8% to 90% relative humidity with a maximum wet bulb temperature of 29 °C at or below +50 °C, non-condensing

Non-operating

5% to 98% relative humidity with a maximum wet bulb temperature of 40 °C at or below +60 °C, non-condensing

Altitude

Operating

3,000 m (9,843 feet)

Non-operating

12,000 m (39,370 feet)

Regulatory

Safety

UL61010-1, CAN/CSA C22.2 No.61010-1, EN61010-1, IEC61010-1 

Emissions

CISPR 11, Class A, EN61000-3-2:2006, EN 61000-3-3:1995 

Immunity

EN 61326-1:2006, IEC 61000-4-2:2001, IEC 61000-4-3:2002, IEC 61000-4-4:2004, IEC 61000-4-5:2001, IEC 61000-4-6:2003, IEC 61000-4-11:2004 

Regional certifications

European union

EN61326-1 

Australia/New Zealand

CISPR 11:2003 

Ordering information

Models

AWG4162

Arbitrary Waveform Generator, 2 analog channels, 2.5 GS/s sampling rate, 14-bit resolution, 1 MSa arbitrary memory depth

Options

-MEM16

16 Mpts arbitrary memory

-MEM32

32 Mpts arbitrary memory

-MEM64

64 Mpts arbitrary memory

-DO16

16-bit digital outputs

-DO32

32-bit digital outputs

Instrument options

Power plug options

Opt. A0

North America power plug (115 V, 60 Hz)

Opt. A1

Universal Euro power plug (220 V, 50 Hz)

Opt. A2

United Kingdom power plug (240 V, 50 Hz)

Opt. A3

Australia power plug (240 V, 50 Hz)

Opt. A5

Switzerland power plug (220 V, 50 Hz)

Opt. A6

Japan power plug (100 V, 50/60 Hz)

Opt. A10

China power plug (50 Hz)

Opt. A11

India power plug (50 Hz)

Opt. A12

Brazil power plug (60 Hz)

Opt. A99

No power cord

Language options

Opt. L0

English overlay (default)

Opt. L1

French overlay

Opt. L3

German overlay

Opt. L5

Japanese overlay

Opt. L7

Simplified Chinese overlay

Opt. L8

Traditional Chinese overlay

Opt. L9

Korean overlay

Opt. L10

Russian overlay

Opt. L99

No overlay

Service options

Opt. C3

Calibration Service 3 Years

Opt. C5

Calibration Service 5 Years

Opt. D1

Calibration Data Report

Opt. D3

Calibration Data Report 3 Years (with Opt. C3)

Opt. D5

Calibration Data Report 5 Years (with Opt. C5)

Opt. G3

Complete Care 3 Years (includes loaner, scheduled calibration, and more)

Opt. G5

Complete Care 5 Years (includes loaner, scheduled calibration, and more)

Opt. R5

Repair Service 5 Years (including warranty)

Opt. R5DW

Repair Service Coverage 5 Years (includes product warranty period). 5-year period starts at time of instrument purchase

Accessories

Standard accessories

Power cord

Country specific

Quick start user manual

 

Software CD

CD containing all relevant software (ArbExpress, TekVISA, .Net, and system recovery)

Documentation CD

CD containing all relevant documentation

Calibration certificate

Certificate of traceable calibration

Accessory pouch

Captive bag to store accessories

200-5130-xx

Front cover

174-4401-00 

USB type A to type B cable – three feet

119-6107-xx

Touch-screen stylus

Optional accessories

RFX100

RFXpress software

AWG4SYNC

Synchronization cable

AWG4DIG16LVDS

Digital output cable (16-bit)

AWG4DIGSCKT

Connector mounted on DUT connects to LVDS cable (manufacture part number: U65-B12-40E0C, Amphenol)

AWG4HDDE

Hard Disk Drive

Recommended accessories

174-6193-00 

SMA cable

174-4401-00 

USB type A to type B cable – three feet

174-5194-00 

USB type A to type B cable – six feet

TEK-USB-488

GPIB-to-USB adapter

HCTEK54

Hard transit case

RMD5000

Rackmount kit

119-7083-xx

Mini keyboard (USB interface)

119-6297-xx

Full-size keyboard with 4-port USB hub

-

USB Mouse

Warranty

Instrument upgrades

Instrument upgrades