Contactez-nous
Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.
Téléphone
Appelez-nous au
Disponible de 9 h à 17 h CET jours ouvrables.
Télécharger
Télécharger des manuels, des fiches techniques, des logiciels, etc. :
Feedback
PSPL5350 6 dB Power Divider, 50 GHz
PSPL5350 Datasheet
Les produits figurant sur cette fiche technique ne sont plus vendus par Tektronix.
Référez-vous à Tektronix Encore pour les équipements de test reconditionnés.
Consultez l'assistance et les informations de garantie pour ces produits.
PSPL5350 Datasheet
The PSPL5350 6 dB Power Divider provides excellent amplitude and phase performance power division from DC to frequencies over 40 GHz. The outputs are nominally attenuated by 6 dB. All ports are impedance matched to 50 Ω when both outputs are terminated in 50 Ω. Power dividers are built using a three-resistor network. The resistors have 1% tolerances, resulting in precise 50 Ω impedance matches at any port. This divider is engineered to provide excellent amplitude and phase symmetry throughout the operating range, regardless of port selection. Maximum division symmetry is obtained when port 1 is used as input, with ports 2 and 3 providing the divided signal output.
Typical performance
Frequency responses from 40 MHz to 40 GHz, liniear sweep at 4 GHz/div
Specifications
| Parameter 1 | Value |
|---|---|
| Rise time | 8 ps, typical |
| Insertion Loss BW (-1.5 dB) | DC to >40 GHz |
| Insertion Loss, DC | 6.02 ± 0.08 dB max, DC |
| Insertion Loss, AC | 5.8 |
| Insertion Loss Asymmetry | 0.05 dB maximum, DC
|
| Phase Tracking | |
| Delay | 100 ps, typical |
| Input Impedance, DC | 50 ± 0.5 Ω max |
| Return Loss | >30 dB, 0 – 1 GHz
>17 dB, 1 – 15 GHz >12.5 dB, 15 – 40 GHz |
| Max Input Power, avg | 2.5 Watts, CW |
| Temperature Range | -55 to 90 °C @ 2.5 W, operating case temperature
linearly derated to 0 W @ 110 °C |
| Warranty | One Year |
- Mechanical dimensions
1 All parameters listed are typical unless max/min guaranteed limits are provided. The DC specs are based upon resistor tolerances and only when used with 50 Ω source and terminations.
Ordering information
Models
- PSPL5350
- Power Divider, 6 dB
Options
- PSPL5350 240JJJ
- 2.4 mm connectors, jacks (f)
- PSPL5350 292JJJ
- 2.92 mm connectors, jacks (f)