![NRZ-Software-Datasheet-EN_US-9-L](/-/media/sites/default/files/datasheets/nrz-software/nrz-software-datasheet-en_us-9-l.jpg)
Contactez-nous
Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.
Appelez-nous au
Disponible de 9 h à 17 h CET jours ouvrables.
Télécharger
Télécharger des manuels, des fiches techniques, des logiciels, etc. :
Feedback
NRZ-M4 Optical Manufacturing TDEC Analysis Software
DSA8300 NRZ-M4 optical analysis software
Plus d’informations
- DSA8300 Digital Sampling Oscilloscope (Discontinued)
- Découvrez d'autres modèles Logiciel pour oscilloscopes, produits keithley, et RF
Lire en ligne :
![NRZ-Software-Datasheet](/-/media/datasheets/nrzsoftwaredatasheetenus1sjpg.jpg?h=179&iar=0&w=180)
The Tektronix NRZ-M4 application provides NRZ signaling analysis, including TDEC (Transmitter and Dispersion Eye Closure) measurement. The application brings together NRZ optical measurements in a simple and easy to use application. This application is designed to minimize the waveform analysis time which suits the manufacturing environment.
This application is intended to be installed on a PC and works by connecting to the sampling scope. Application allows you to acquire signal directly from the connected DSA8300 sampling oscilloscope and analyze the acquired waveform data.
Key features
-
Simultaneously analyze up to 4 optical channels
-
Characterization of 100Gbps Optical transceivers (SR4, LR4) devices with Mask margin measurements. Perform optimal mask fitting for better margin.
-
Support for Transmitter dispersion eye closure (TDEC) and Vertical eye closure penalty (VECP) measurements.
-
Support for 80C10C, 80C17, 80C18, 80C20 and 80C21 optical modules.
-
Signal characterization measurements such as Amplitude and Timing measurements
-
Support for Phase reference characterization clock for more accurate results.
-
Support for measurements at various population limits.
-
Show results as numeric and graphical display.
-
Display 2D eye diagrams with embedded mask
-
Save the analysis results to a file.
-
Run multiple instances of the application and connect each of them to different DSA8300s' and perform parallel analysis of multiple channels.
Measurement capability
Category | Measurements | |
---|---|---|
Amplitude measurements |
|
|
Timing measurements |
|
|
TDEC,VECP Measurment |
|
|
Mask Measurement | Mask Margin @ target hit ratio |
1IEEE 802.3bm, Section 95.8.5
Ordering information
Models
- DSA8300 400G-M4
- NRZ-M4 Optical Manufacturing Analysis Software, 4 channel TDECQ
- DSA83UP 400G-M4
- NRZ-M4 Upgrade for customers who already have a DSA8300
Computer requirements
The NRZ-M4 application is designed to run on a PC running Windows operating system. A high performance PC is recommended to minimize the computation time of waveform analysis.
-
Operating system: Microsoft Windows 10 (64 bit) operating system.
-
Screen resolution: 1920 x 1080 with scaling factor set to 100%.
Software requirements
The NRZ-M4 application requires the following software to be installed on the PC.
-
TekVISA: TekVISA version 4.2.0.10 is recommended. Installation is available during NRZ-M4 installation.
-
Matlab runtime: Matlab 2017b version 9.3 is required.
-
Scope Noise Characterization: Install the Scope Noise Characterization software on the DSA8300. This software is bundled with the NRZ-M4 application package.