![AFG30113021B3022B3101310232513252ArbitraryFunctionGenerators-2-N.jpg AFG30113021B3022B3101310232513252ArbitraryFunctionGenerators-2-N](/-/media/sites/default/files/media/image/afg30113021b3022b3101310232513252arbitraryfunctiongenerators-2-n.jpg)
Contactez-nous
Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.
Téléphone
Appelez-nous au
Disponible de 9 h à 17 h CET jours ouvrables.
Télécharger
Télécharger des manuels, des fiches techniques, des logiciels, etc. :
Feedback
Arbitrary/Function Generator AFG3000 Series (replaced by AFG3000C)
AFG 3011 / 3021B / 3022B / 3101 / 3102 / 3251 / 3252 (replaced by AFG3000C)
Les produits figurant sur cette fiche technique ne sont plus vendus par Tektronix.
Référez-vous à Tektronix Encore pour les équipements de test reconditionnés.
Consultez l'assistance et les informations de garantie pour ces produits.
Plus d’informations
- Générateur de fonctions arbitraires série AFG3000C
- Découvrez d'autres modèles Générateurs de fonctions arbitraires avec précision du signal
Lire en ligne :
![](/-/media/datasheets/afg30113021b3022b3101310232513252arbitraryfunctiongenerators1sjpg.jpg?h=85&iar=0&w=200)
AFG 3011 / 3021B / 3022B / 3101 / 3102 / 3251 / 3252 (replaced by AFG3000C)
This series has been replaced by AFG3000C.
*
Features & Benefits
- 10 MHz, 25 MHz, 100 MHz, or 240 MHz Sine Waveforms
- 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms
- Amplitude up to 20 Vp-p into 50 Ω Loads
- 5.6 in. Display for Full Confidence in Settings and Waveform Shape
- Multilanguage and Intuitive Operation Saves Setup Time
- Pulse Waveform with Variable Edge Times
- AM, FM, PM, FSK, PWM
- Sweep and Burst
- Dual-channel Models Save Cost and Bench Space
- USB Connector on Front Panel for Waveform Storage on Memory Device
- USB, GPIB, and LAN
- LabVIEW and LabWindows/IVI-C Drivers
Applications
- Electronic Test and Design
- Sensor Simulation
- Functional Test
- Education and Training
Product Description
Unmatched performance, versatility, intuitive operation, and affordability make the AFG3000 Series of Function, Arbitrary Waveform, and Pulse Generators the most useful instruments in the industry.
Superior Performance and Versatility
Users can choose from 12 different standard waveforms. Arbitrary waveforms can be generated up to 128 K in length at high sampling rates. On pulse waveforms, leading and trailing edge time can be set independently. External signals can be connected and added to the output signal. Dual-channel models can generate two identical or completely different signals. All instruments feature a highly stable time base with only ±1 ppm drift per year.
Intuitive User Interface Shows More Information at a Single Glance
A large screen shows all relevant waveform parameters and graphical wave shape at a single glance. This gives full confidence in the signal settings and lets you focus on the task at hand. Shortcut keys provide direct access to frequently used functions and parameters. Others can be selected conveniently through clearly structured menus. This reduces the time needed for learning and relearning how to use the instrument. Look and feel are identical to the world's most popular TDS3000 Oscilloscopes.
ArbExpress™ Software Included for Creating Waveforms with Ease
With this PC software waveforms can be seamlessly imported from any Tektronix oscilloscope, or defined by standard functions, equation editor, and waveform math.
Characteristics
AFG3000 Series Characteristics
Characteristic |
AFG3011 |
AFG3021B AFG3022B |
AFG3101 AFG3102 |
AFG3251 AFG3252 |
---|---|---|---|---|
Channels |
1 |
1 / 2 |
1 / 2 |
1 / 2 |
Waveforms |
Sine, Square, Pulse, Ramp, Triangle, Sin(x)/x, Exponential Rise and Decay, Gaussian, Lorentz, Haversine, DC, Noise |
|||
Sine Wave |
1 µHz to 10 MHz |
1 µHz to 25 MHz |
1 µHz to 100 MHz |
1 µHz to 240 MHz |
Sine wave in Burst Mode |
1 µHz to 5 MHz |
1 µHz to 12.5 MHz |
1 µHz to 50 MHz |
1 µHz to 120 MHz |
Effective maximum frequency out |
10 MHz |
25 MHz |
100 MHz |
240 MHz |
Amplitude Flatness (1 Vp-p) |
||||
<5 MHz |
±0.15 dB |
±0.15 dB |
±0.15 dB |
±0.15 dB |
5 MHz to 10 MHz |
±0.3 dB |
— |
— |
— |
5 MHz to 20 MHz |
— |
±0.3 dB |
±0.3 dB |
±0.3 dB |
20 MHz to 25 MHz |
— |
±0.5 dB |
±0.3 dB |
±0.3 dB |
25 MHz to 100 MHz |
— |
— |
±0.5 dB |
±0.5 dB |
100 MHz to 200 MHz |
— |
— |
— |
±1.0 dB |
200 MHz to 240 MHz |
— |
— |
— |
±2.0 dB |
Harmonic Distortion (1 Vp-p) |
||||
10 Hz to 20 kHz |
< -60 dBc |
< -70 dBc |
< -60 dBc |
< -60 dBc |
20 kHz to 1 MHz |
< -55 dBc |
< -60 dBc |
< -60 dBc |
< -60 dBc |
1 MHz to 5 MHz |
< -45 dBc |
< -50 dBc |
< -50 dBc |
< -50 dBc |
5 MHz to 10 MHz |
< -45 dBc |
< -50 dBc |
< -37 dBc |
< -37 dBc |
10 MHz to 25 MHz |
— |
< -40 dBc |
< -37 dBc |
< -37 dBc |
>25 MHz |
— |
— |
< -37 dBc |
< -30 dBc |
THD |
<0.2% (10 Hz – 20 kHz, 1 Vp-p) |
|||
Spurious (1 Vp-p) |
||||
10 Hz to 1 MHz |
< -60 dBc |
< -60 dBc |
< -60 dBc |
< -50 dBc |
1 MHz to 10 MHz |
< -50 dBc |
— |
— |
— |
1 MHz to 25 MHz |
— |
< -50 dBc |
< -50 dBc |
< -47 dBc |
>25 MHz |
— |
— |
< -50 dBc + 6 dBc/octave |
< -47 dBc + 6 dBc/octave |
Phase noise, typical |
< -110 dBc/Hz at 10 MHz, 10 kHz offset, 1 Vp-p |
< -110 dBc/Hz at 20 MHz, 10 kHz offset, 1 Vp-p |
||
Residual clock noise |
-63 dBm |
-63 dBm |
-57 dBm |
-57 dBm |
Square Wave |
1 µHz to 5 MHz |
1 µHz to 12.5 MHz |
1 µHz to 50 MHz |
1 µHz to 120 MHz |
Rise/Fall time |
≤50 ns |
≤18 ns |
≤5 ns |
≤2.5 ns |
Jitter (RMS), typical |
500 ps |
500 ps |
200 ps |
100 ps |
Ramp Wave |
1 µHz to 100 kHz |
1 µHz to 250 kHz |
1 µHz to 1 MHz |
1 µHz to 2.4 MHz |
Linearity, typical |
≤0.2% of peak output |
≤0.1% of peak output |
≤0.15% of peak output |
≤0.2% of peak output |
Symmetry |
0.0% to 100.0% |
0.0% to 100.0% |
||
Pulse Wave |
1 mHz to 5 MHz |
1 mHz to 12.5 MHz |
1 mHz to 50 MHz |
1 mHz to 120 MHz |
Pulse width |
80.00 ns to 999.99 s |
30.00 ns to 999.99 s |
8.00 ns to 999.99 s |
4.00 ns to 999.99 s |
Resolution |
10 ps or 5 digits |
|||
Pulse duty |
0.001% to 99.999% (Limitations of pulse width apply) |
|||
Edge transition time |
50 ns to 625 s |
18 ns to 625 s |
5 ns to 625 s |
2.5 ns to 625 s |
Resolution |
10 ps or 4 digits |
10 ps or 4 digits |
||
Lead delay |
|
|||
Range |
(Continuous Mode): 0 ps to Period (Triggered/Gated Burst Mode): 0 ps to Period – [Pulse Width + 0.8 * (Leading Edge Time + Trailing Edge Time)] |
|||
Resolution |
10 ps or 8 digits |
|||
Overshoot, typical |
<5% |
|||
Jitter (RMS), typical |
500 ps |
500 ps |
200 ps |
100 ps |
Other Waveforms |
1 µHz to 100 kHz |
1 µHz to 250 kHz |
1 µHz to 1 MHz |
1 µHz to 2.4 MHz |
Noise Bandwidth (-3 dB) |
10 MHz |
25 MHz |
100 MHz |
240 MHz |
Noise type |
White Gaussian |
|||
DC (into 50 Ω) |
-10 V to +10 V |
-5 V to +5 V |
-5 V to +5 V |
-2.5 V to +2.5 V |
Arbitrary Waveforms |
1 mHz to 5 MHz |
1 mHz to 12.5 MHz |
1 mHz to 50 MHz |
1 mHz to 120 MHz |
Arbitrary waveforms in Burst Mode |
1 mHz to 2.5 MHz |
1 mHz to 6.25 MHz |
1 mHz to 25 MHz |
1 mHz to 60 MHz |
Effective analog bandwidth (-3 dB) |
8 MHz |
34 MHz |
100 MHz |
225 MHz |
Nonvolatile memory |
4 waveforms |
4 waveforms |
4 waveforms |
4 waveforms |
Memory: Sample rate |
2 to 128 K: 250 MS/s |
2 to 128 K: 250 MS/s |
>16 K to 128 K: 250 MS/s 2 to 16 K: 1 GS/s |
>16 K to 128 K: 250 MS/s 2 to 16 K: 2 GS/s |
Vertical resolution |
14 bits |
14 bits |
14 bits |
14 bits |
Rise/Fall time |
≤80 ns |
≤20 ns |
≤8 ns |
≤3 ns |
Jitter (RMS) |
4 ns |
4 ns |
1 ns at 1 GS/s 4 ns at 250 MS/s |
500 ps at 2 GS/s 4 ns at 250 MS/s |
Amplitude, 50 Ω Load |
20 mVp-p to 20 Vp-p |
10 mVp-p to 10 Vp-p |
20 mVp-p to 10 Vp-p |
≤200 MHz: 50 mVp-p to 5 Vp-p >200 MHz: 50 mVp-p to 4 Vp-p |
Amplitude, Open Circuit |
40 mVp-p to 40 Vp-p |
20 mVp-p to 20 Vp-p |
40 mVp-p to 20 Vp-p |
≤200 MHz: 100 mVp-p to 10 Vp-p >200 MHz: 100 mVp-p to 8 Vp-p |
Accuracy |
±(2% of setting +2 mV) (1 kHz sine wave, 0 V offset, >20 mVp-p amplitude) |
±(1% of setting +1 mV) (1 kHz sine wave, 0 V offset, >10 mVp-p amplitude) |
||
Resolution |
0.1 mVp-p, 0.1 mVRMS, 1 mV, 0.1 dBm or 4 digits |
|||
Units |
Vp-p, VRMS, dBm (sine wave only) |
|||
Output impedance |
50 Ω |
|||
Load impedance setting |
Selectable: 50 Ω, 1Ω to 10.0 kΩ, High Z (Adjusts displayed amplitude according to selected load impedance) |
|||
Isolation |
42 Vpk maximum to earth |
|||
Short-circuit protection |
Signal outputs are robust against permanent shorts against floating ground |
|||
External voltage protection |
To protect signal outputs against external voltages use fuse adapter 013-0345-xx |
|||
DC offset range, 50 Ω load |
±(10 Vpk – Amplitudepp/2) |
±(5 Vpk – Amplitudepp/2) |
±5 Vpk DC |
±2.5 Vpk DC |
DC offset range, open circuit |
±(20 Vpk – Amplitudepp/2) |
±(10 Vpk – Amplitudepp/2) |
±10 Vpk DC |
±5 Vpk DC |
Accuracy |
±(2% of |setting| + 10 mV + 1% of amplitude (Vp-p)) |
±(1% of |setting| + 5 mV + 0.5% of amplitude (Vp-p)) |
||
Resolution |
1 mV |
Modulation
AM, FM, PM
Characteristic |
Description |
---|---|
Carrier Waveforms |
All, except Pulse, Noise, and DC |
Source |
Internal/External |
Internal Modulating Waveform |
Sine, square, ramp, noise, ARB (AM: maximum waveform length 4,096; FM/PM: maximum waveform length 2,048) |
Internal Modulating Frequency |
2 mHz to 50.00 kHz |
AM Modulation Depth |
0.0% to +120.0% |
Min FM Peak Deviation |
DC |
Max FM Peak Deviation |
See chart, below |
Modulation: Max FM Peak Deviation
Characteristic |
AFG3011 |
AFG3021B AFG3022B |
AFG3101 AFG3102 |
AFG3251 AFG3252 |
---|---|---|---|---|
Sine |
5 MHz |
12.5 MHz |
50 MHz |
120 MHz |
Square |
2.5 MHz |
6.25 MHz |
25 MHz |
60 MHz |
ARB |
2.5 MHz |
6.25 MHz |
25 MHz |
60 MHz |
Others |
50 kHz |
125 kHz |
500 kHz |
1.2 MHz |
PM Phase Deviation - 0.0° to +180.0°
Frequency Shift Keying
Characteristic |
Description |
---|---|
Carrier Waveforms |
All, except Pulse, Noise, and DC |
Source |
Internal/External |
Internal Modulating Frequency |
2 mHz to 1.000 MHz |
Number of Keys |
2 |
Pulse Width Modulation
Characteristic |
Description |
---|---|
Carrier Waveform |
Pulse |
Source |
Internal/External |
Internal Modulating Waveform |
Sine, square, ramp, noise, ARB (maximum waveform length 2,048) |
Internal Modulating Frequency |
2 mHz to 50.00 kHz |
Deviation |
0% to 50.0% of pulse period |
Sweep
Characteristic |
Description |
---|---|
Waveforms |
All, except Pulse, Noise, and DC |
Type |
Linear, logarithmic |
Sweep Time |
1 ms to 300 s |
Hold/Return Time |
0 ms to 300 s |
Max Total Sweep Time |
300 s |
Resolution |
1 ms or 4 digits |
Total Sweep Time Accuracy, typical |
≤0.4% |
Min Start/Stop Frequency |
All except ARB: 1 µHz ARB: 1 mHz |
Max Start/Stop Frequency |
See chart, below |
Sweep: Max Start/Stop Frequency
Characteristic |
AFG3011 |
AFG3021B AFG3022B |
AFG3101 AFG3102 |
AFG3251 AFG3252 |
---|---|---|---|---|
Sine |
10 MHz |
25 MHz |
100 MHz |
240 MHz |
Square |
5 MHz |
12.5 MHz |
50 MHz |
120 MHz |
ARB |
5 MHz |
12.5 MHz |
50 MHz |
120 MHz |
Others |
100 kHz |
250 kHz |
1 MHz |
2.4 MHz |
Burst
Characteristic |
Description |
---|---|
Waveforms |
All, except Noise and DC |
Type |
Triggered, gated (1 to 1,000,000 cycles or Infinite) |
Internal Trigger Rate |
1 μs to 500.0 s |
Gate and Trigger Sources |
Internal, external, remote interface |
Auxiliary Inputs
Characteristic |
Description |
---|---|
Modulation Inputs Channel 1, Channel 2 |
|
Input range |
All except FSK: ±1 V FSK: 3.3 V logic level |
Impedance |
10 kΩ |
Frequency range |
DC to 25 kHz (122 kS/s) |
External Triggered/Gated Burst Input |
|
Level |
TTL compatible |
Impedance |
10 kΩ |
Pulse width |
100 ns minimum |
Slope |
Positive/Negative, selectable |
Trigger delay |
0.0 ns to 85.000 s |
Resolution |
100 ps or 5 digits |
Jitter (RMS), typical |
Burst: <500 ps (Trigger input to signal output) |
10 MHz Reference Input |
|
Impedance |
1 kΩ, AC coupled |
Required Input Voltage Swing |
100 mVp-p to 5 Vp-p |
Lock Range |
10 MHz ±35 kHz |
External Channel 1 Add Input |
AFG3101, AFG3102, AFG3251, AFG3252 only |
Impedance |
50 Ω |
Input range |
-1 V to +1 V (DC + peak AC) |
Bandwidth |
DC to 10 MHz (-3 dB) at 1 Vp-p |
Auxiliary Outputs
Characteristic |
Description |
---|---|
Channel 1 Trigger Output |
|
Level |
Positive TTL level pulse into 1 kΩ |
Impedance |
50 Ω |
Jitter (RMS), typical |
AFG3011/21B/22B: 500 ps AFG3101/02: 200 ps AFG3251/52: 100 ps |
Max Frequency |
4.9 MHz (4.9 MHz to 50 MHz: A fraction of the frequency is output; >50 MHz: no signal is output) |
10 MHz Reference Out |
AFG3101, AFG3102, AFG3251, AFG3252 only |
Impedance |
50 Ω, AC coupled |
Amplitude |
1.2 Vp-p into 50 Ω load |
Common Characteristics
Characteristic |
Description |
||
---|---|---|---|
Frequency Setting Resolution |
1 μHz or 12 digits |
||
Phase (except DC, Noise, Pulse) |
|||
Range |
-180° to +180° |
||
Resolution |
0.01° (sine), 0.1° (other waveforms) |
||
Internal Noise Add |
When activated, output signal amplitude is reduced to 50% |
||
Level |
0.0% to 50% of amplitude (Vp-p) setting |
||
Resolution |
1% |
||
Main Output |
50 Ω |
||
Effective Frequency Switching Speed |
2 ms using remote control (sequencing not available) |
||
Internal Frequency Reference |
|||
Stability |
All except ARB: ±1 ppm, 0 °C to 50 °C ARB: ±1 ppm ± 1 µHz, 0 °C to 50 °C |
||
Aging |
±1 ppm per year |
||
Remote Programming |
GPIB, LAN 10BASE-T / 100BASE-TX, USB 1.1 Compatible with SCPI-1999.0 and IEEE 488-2 standards |
||
Configuration times, typical |
USB |
LAN |
GPIB |
Function change |
95 ms |
103 ms |
84 ms |
Frequency change |
2 ms |
19 ms |
2 ms |
Amplitude change |
60 ms |
67 ms |
52 ms |
Select user ARB |
88 ms |
120 ms |
100 ms |
Data download time for 4000 point waveform data, typical |
20 ms |
84 ms |
42 ms |
Power Source |
100 to 240 V, 47 to 63 Hz, or 115 V, 360 to 440 Hz |
||
Power Consumption |
Less than 120 W |
||
Warm-up Time, typical |
20 minutes |
||
Power-on Self Calibration, typical |
<16 s |
||
Acoustic Noise, typical |
<50 dBA |
||
Display |
AFG3021B: 5.6 in. Monochrome LCD All others: 5.6 in. Color LCD |
||
User Interface and Help Language |
English, French, German, Japanese, Korean, Simplified and Traditional Chinese, Russian (user selectable) |
Physical Characteristics
Benchtop Configuration
Dimensions |
mm |
in. |
---|---|---|
Height |
156.3 |
6.2 |
Width |
329.6 |
13.0 |
Depth |
168.0 |
6.6 |
Weight |
kg |
lb. |
Net |
4.5 |
9.9 |
Shipping |
5.9 |
12.9 |
Environmental and Safety Characteristics
Characteristic |
Description |
---|---|
Temperature |
|
Operating |
0 °C to +50 °C |
Nonoperating |
-30 °C to +70 °C |
Humidity |
|
Operating |
≤ +40 °C: ≤80% > +40 °C to 50 °C: ≤60% |
Altitude |
Up to 10,000 ft./3,000 m |
EMC Compliance |
|
European Union |
EN 61326:1997 Class A EN 61000-3-2:2000, and EN 61000-3-3:1995 IEC 61000-4-2:1999, -4-3:2002, -4-4:2004, -4-5:2005, -4-6:2003, -4-11:2004 |
Australia |
EN 61326:1997 |
Safety |
UL 61010-1:2004 CAN/CSA C22.2 No. 61010-1:2004 IEC 61010-1:2001 |
Ordering Information
AFG3011, AFG3021B, AFG3022B, AFG3101, AFG3102, AFG3251, AFG3252
Arbitrary/Function Generator
Includes: Quick-start user manual, power cord, USB cable, CD-ROM with programmer manual, service manual, LabView and IVI drivers, CD-ROM with ArbExpress™ software, and NIST-traceable calibration certificate. Please specify power plug when ordering.
International Power Plugs
Option |
Description |
---|---|
Opt. A0 |
North America power |
Opt. A1 |
Universal EURO power |
Opt. A2 |
United Kingdom power |
Opt. A3 |
Australia power |
Opt. A5 |
Switzerland power |
Opt. A6 |
Japan power |
Opt. A10 |
China power |
Opt. A11 |
India power |
Opt. A99 |
No power cord or AC adapter |
Note: Includes front-panel overlay.
Manual Options
Option |
Description |
---|---|
Opt. L0 |
English (071-1631-xx) |
Opt. L1 |
French (071-1632-xx) |
Opt. L2 |
Italian (071-1669-xx) |
Opt. L3 |
German (071-1633-xx) |
Opt. L4 |
Spanish (071-1670-xx) |
Opt. L5 |
Japanese (071-1634-xx) |
Opt. L7 |
Simple Chinese (071-1635-xx) |
Opt. L8 |
Traditional Chinese (071-1636-xx) |
Opt. L9 |
Korean (071-1637-xx) |
Opt. L10 |
Russian (071-1638-xx) |
Opt. L99 |
No manual |
Service
Option |
Description |
---|---|
Opt. C3 |
Calibration Service 3 Years |
Opt. C5 |
Calibration Service 5 Years |
Opt. CA1 |
Single calibration event or coverage for the designated calibration interval, whichever comes first |
Opt. D1 |
Calibration Data Report |
Opt. D3 |
Calibration Data Report 3 Years (with Opt. C3) |
Opt. D5 |
Calibration Data Report 5 Years (with Opt. C5) |
Opt. R5 |
Repair Service 5 Years |
Opt. SILV200 |
Standard Warranty Extended to 5 Years (AFG3011, AFG3021B, AFG3022B, AFG3101, and AFG3102) |
Opt. SILV400 |
Standard Warranty Extended to 5 Years (AFG3251 and AFG3252) |
Warranty
Three-year warranty on parts and labor.
Recommended Accessories
Accessory |
Description |
---|---|
Rackmount Kit |
RM3100 |
Fuse adapter, BNC-P to BNC-R |
013-0345-xx |
Fuse set, 3 pcs, 0.125 A. |
159-0454-xx |
BNC cable shielded, 3 ft. |
012-0482-xx |
BNC cable shielded, 9 ft. |
012-1256-xx |
GPIB cable, double shielded |
012-0991-xx |
![AFG30113021B3022B3101310232513252ArbitraryFunctionGenerators-2-N.jpg AFG30113021B3022B3101310232513252ArbitraryFunctionGenerators-2-N](/-/media/sites/default/files/media/image/afg30113021b3022b3101310232513252arbitraryfunctiongenerators-2-n.jpg)
BNC Fuse Adapter and 0.125 A Fuse