Contact us

Call

Call us at

Available 6:00 AM – 5:00 PM (PST) Business Days

Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

Feedback

Why do I get a flat line signal in Vectorscope Display Mode when I apply a 75% or 100% Color Bar Composite Video signal to Channel 1 of my TDS3000 series scope with TDS3VID or TDS3SDI Video module?

Question :

Why do I get a flat line signal in Vectorscope Display Mode when I apply a 75% or 100% Color Bar Composite Video signal to Channel 1 of my TDS3000 series scope with TDS3VID or TDS3SDI Video module?

Answer :

The TDS3VID, or TDS3SDI Vectorscope feature only supports Component Video signals. You must apply a Color Difference Component Analog Video signal, for example; Y,Pb,Pr to two input channels on the TDS3000/B Scope which uses XY mode to produce the Vectorscope display.

This FAQ Applies to:

Product Series: TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued) TDS3000C Digital Phosphor Oscilloscope (Discontinued)

Product:

FAQ ID 59016

View all FAQs »