Blog: #RADAR AND EW

Einträge

An RF engineer performing spectrum monitoring via a laptop PC while observing a radar system.

Capture Elusive RF Signals with Advanced Software for Handheld Spectrum Analyzers Tuesday, November 26, 2024 von: Alejandro Buritica

RF signals are more dynamic and unpredictable than ever, which presents new challenges for engineers. Even traditional vector spectrum analyzers struggle to capture transient or intermittent signals, leaving you without a complete picture of how your circuit or system is performing. Tektronix SignalVu-PC software now provides three advanced triggers enabling you to visualize, capture, and analyze …

#RFSignals #Radar&EW #Software #SpectrumAnalyzer

Wideband Oscilloscopes for MIMO radar testing being used by and engineer.

MIMO Radar System Testing Tools and Techniques Thursday, January 11, 2024 von: Dylan Stinson

Modern technologies such as MIMO require the need for wide bandwidth, phase coherent, multi-channel analysis. Antenna elements in a MIMO radar system operate independently to cover a wide, often 180-degree, field of view without the need for directivity adjustments. This significantly improves scan times. The MIMO radar employs time, frequency, or coding techniques in each transmit signal to …

#Oscilloscope #Radar&EW #Software #SpectrumAnalyzer

Pulse Radar Signal Analysis Wednesday, August 16, 2023 von: Dylan Stinson

Radar applications today, whether found in defense or in aerospace, increasingly require analysis across multiple channels. For AESA antenna, transmitter and receiver module calibration both synchronization and wide bandwidth capture is important and being able to synchronize multiple channels for efficient calibration can be challenging. Radar DSP and system integrator engineers working in FPGA …

#Radar&EW

The Need for Fully Configurable, Multi-Channel RF Analysis Tuesday, March 28, 2023 von: Koteshwara Raju

Engineers and researchers whose work involves MIMO, phased array, and beam forming need a signal analysis tool that offers wide bandwidth and multi-channel capability. Oscilloscopes would seem to be a good choice – except many are either not designed to analyze RF signals or are limited to analyzing a single RF channel at a time. But RF spectral and modulation analysis of multiple channels …

#Oscilloscope #RFSignals #Radar&EW #Software

4 Methods for Measuring Pulse Modulations in Radar Signals Friday, January 20, 2023 von: Tektronix Expert

Modern radar signals make use of intra-pulse modulation or modulation on pulse (MOP), such as a linear frequency modulation (LFM), or some form of phase modulation (such as a bi-phase Barker code) to improve range resolution. They also include modulation on pulse to occupy more bandwidth and thus decrease the probability of intercept (POI). Additionally, intra-pulse modulation can include some …

#Oscilloscope #RFSignals #Radar&EW

Radar emitting ships interact with each other

3 Radiation Hazards (RADHAZ) and How to Mitigate Risk Wednesday, September 8, 2021 von: Tektronix Expert

If you are involved in military, aerospace or defense and have been around radar and communication systems, with high-power RF transmitters and high-gain antennas, you are probably aware of the many risks associated with Radio Frequency Radiation (RFR) Hazards. RF emissions from these systems have the potential to cause catastrophic damage to operations and maintenance personnel, ordnance and …

#RFSignals #Radar&EW #SpectrumAnalyzer

Monitoring the wireless spectrum for interference

3 System Design Challenges with Spectrum Monitoring Tuesday, September 7, 2021 von: Tektronix Expert

The wireless spectrum is a finite commodity that is tightly regulated, managed and shared by all nations, manufacturers and citizens, who risk being fined if they are caught operating outside of what's regulated or licensed. The presence of interference or other signals of interest creeping into one's band of wireless spectrum is a daily occurrence to some and is of great concern to many who may …

#SpectrumAnalyzer #RFSignals #Radar&EW

Real-time Digital Signal Processing for Electronic Warfare Systems Monday, August 2, 2021 von: Tektronix Expert

Evaluating and characterizing wideband communications, radar and electronic warfare systems in real time is challenging. Lacking a commercial off-the-shelf (COTS) alternative, some radar test teams stream test data to an inherently non-deterministic computing device such as a PC or laptop, inevitably leading to lost or missing data with no ability to verify that data is being recorded as expected …

#RFSignals #Radar&EW #SpectrumAnalyzer

Setting up an Automated Drone Detection System Using Spectrum Analyzers Tuesday, May 25, 2021 von: Tektronix Expert

In a few short years, the number of drones, or unmanned aerial vehicles (UAVs), purchased has soared. In the US alone, the FAA projects the small model hobbyist UAV fleet will more than double from an estimated 1.1 million vehicles in 2017 to 2.4 million units by 2022. Worldwide, Teal Group’s World Civil UAS Market Profile and Forecast projected in 2018 that non-military UAS production (Commercial …

#RFSignals #Radar&EW #SpectrumAnalyzer #SpectrumView

Well defined pulses like these are a rarity in the real world.

Never Miss a Pulse Wednesday, December 2, 2020 von: Tektronix Expert

The RF pulse characteristics of a radar reveal a great deal about a its capability. Electronic Warfare (EW) and Electronic lntelligence (ELINT) experts specialize in the study of these pulsed signals. Pulse characteristics provide valuable information about the type of radar producing a signal and what its source might be; sailboat, battleship, passenger plane, bomber, missile, etc. But how do you …

#RFSignals #Software #Radar&EW