Question :
Installing KTTI Communication Modules DMM6510 DAQ6500
Answer :
1. Remove the Communication Accessory Cover from the rear panel of the instrument.
2. Insert the Accessory Card into the slot.
3. Line up the black connector on the rear of the card with the two tabs on the PCB inside the instrument.
4. Press firmly until the tabs are seated in the connector of the accessory card.
5. Tighten the screws on the accessory card panel to the rear panel of the instrument.
This FAQ Applies to:
Product Series: DAQ6510 Data Acquisition and Logging, Multimeter System Đồng hồ vạn năng Keithley DMM6500 6,5 chữ số với màn hình cảm ứng đồ họa
Product:
FAQ ID 714366
View all FAQs »