Question :
Can my oscilloscope operate on 400Hz power?
Answer :
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope.
If you're having trouble finding your answer or can't find the manual, please call our Technical Support Center and an Application Engineer will guide you to the right manual.
Model | Power Source |
|---|---|
MSO/DPO2000/B | 400Hz at 115VACRMS |
MSO/DPO3000 | 400Hz at 115VACRMS |
MDO3000 | 400Hz at 115VACRMS |
MSO/DPO4000/B | 400Hz at 115VACRMS |
MDO4000/B/C | 400Hz at 115VACRMS |
MSO/DPO5000/B | 400Hz at 115VACRMS |
DPO7000/C | 400Hz at 115VACRMS |
MSO/DSA/DPO70000/B/C/D/DX/SX | 400Hz at 115VACRMS |
TDS1000B | 90 to 132 VACRMS, 360 to 440 Hz |
TDS2000/B/C | 90 to 132 VACRMS, 360 to 440 Hz |
TBS1000 | 90 to 132 VACRMS, 360 to 440 Hz |
TDS3000B | 47 Hz to 440 Hz from 90 to 250 VACRMS |
TDS3000C | 45 Hz to 440 Hz from 100 to 120 VACRMS |
TDS5000/B | 115 VRMS ±10%, 360 to 440 Hz |
THS700 | not rated for 400 Hz operation |
TPS2000/B | not rated for 400 Hz operation |
This FAQ Applies to:
Product Series: Máy hiện sóng lưu trữ số TPS2000B Máy hiện sóng lân quang số TDS3000C (Ngừng sản xuất) MSO3000 / DPO3000 DPO7000 MCA3000 Máy hiện sóng miền hỗn hợp MDO3024 Máy hiện sóng tín hiệu hỗn hợp MSO/DPO4000 (Ngừng sản xuất) Máy hiện sóng tín hiệu hỗn hợp MSO/DPO5000B Máy hiện sóng lưu trữ kỹ thuật số TDS2000C (Ngừng sản xuất) Máy hiện sóng miền hỗn hợp MDO4000C
Product:
FAQ ID 63266
View all FAQs »