True RMS Multimeters with Autoranging Scope

Characteristics

Multimeter Capabilities

Resolution - 4000 count, 3364 digits

DC Voltage Ranges - 400.0 mV to 850 V

DC Volts Accuracy - ±(0.5% of reading + 5 counts)

True RMS AC Voltage Ranges - 400.0 mV to 600 V

AC Volts Accuracy -

50 to 60 Hz: ±(2% of reading + 5 counts)

500 Hz: ±(3% of reading + 5 counts)

Resistance Ranges - 400.0 ohm to 40.00 Megohm

Resistance Accuracy - ±(0.5% of reading + 2 counts); 40 Megohm ±(2% of reading + 5 counts)

Diode Test Range - 0 to 2 V

Continuity Check - Audible/visible indicators

Modes - Min, Max, Max-Min, Hold, Delta Hold

Oscilloscope Capabilities

Digitizers, Channels - Two

Maximum Sample Rate - 25 MS/s per channel

Bandwidth - DC to 5 MHz

Vertical Sensitivity - 5 mV to 500 V/div

Peak Detect - 40 ns

Record Length - 256 points

Reference Waveforms - 4 waveforms

Setup Storage - 4

Reference Screens - 1

Acquisition Modes - Sample, Spike Detect, Smooth, Roll, Dynamic Display DSP

Trigger Modes - Auto-Level, Auto, Normal, Single Shot

Operation Modes - Autorange, Manual, Single Shot, AC-Line Test

Cursors w/ Readouts - Delta V, Delta T, 1/Delta T

Measurements - Frequency, Period, Max, Min, Pk-Pk, Duty Cycle, RMS Power Factor, THDF

Waveform Math - Add, Subtract

Display Update Rate - Up to 500 waveforms/second

Physical Characteristics

Length: 211 mm (8.3 in.)

Width: 141 mm (5.6 in.)

Depth: 43 mm (1.7 in.)

Net Weight (including Battery): 1 kg

Operating Ambient Temperature - 0 to 50 °C

Display - 256 × 128 dot LCD

Power Source - 6 AA batteries

Battery Life - 4.5 hr typical (alkaline cells)

Safety

CSA, UL 3111, IEC 1010

EMI - CE rated for emissions