Вопрос :
What does the data inside parenthesis in the WFM or WVR series error log mean?
Ответ :
Any data inside parentheses in the error log or status display screens is a short-hand notation designed to give you more detail about the nature of the error. In general, uppercase letters represent values exceeding their maximum allowed range and lowercase letters represent values falling below their minimum allowed range. Here are a few examples of these codes and how to interpret them for various error conditions:
RGB Gamut Error: (RrGgBb)
R = red > maximum allowed value
r = red < minimum allowed value
G = green > maximum allowed value
g = green < minimum allowed value
B = blue > maximum allowed value
b = blue < minimum allowed value
- = no error
Example: (R--gB-) = red > maximum AND green < minimum AND blue > maximum
Composite Gamut Error: (CcYy)
C = chrominance > maximum allowed value
c = chrominance < minimum allowed value
Y = luminance > maximum allowed value
y = luminance < minimum allowed value
- = no error
Example: (C--y) = chrominance > maximum AND luminance < minimum
Audio Presence: (12345678)
This tells us which channels of audio have data present
Example: (12--56--) = audio data present on channels 1, 2, 5 and 6 but not on any others
Stuck Bits: (0000000000)
0 = bit is stuck at zero
1 = bit is stuck at one
- = bit is not stuck
Example: (--------11) = the least two significant bits in the SDI stream are stuck at one (this or (--------00) are extremely common errors to see on 8-bit composite-to-SDI converters).
Эти часто задаваемые вопросы относятся к
Серия приборов не найдена
Прибор:
Идентификатор часто задаваемых вопросов 56036
Просмотреть все ЧЗВ »