What do I need to know to make my own cable for a CTM-10?

Q: What do I need to know to make my own cable for a CTM-10?

Product(s) : PCI/ISA Plug-In Board: CTM-10 Question : What do I need to know to make my own cable for a CTM-10? Answer: Revisions of the &quot;CTM-10 and CTM-05/A Users Guide&quot; (P/N 87570) prior to Rev D had an incorrect pin-out diagram (figure 4-2 and figure B-1). With Rev D of this User's Guide, the correct pinout diagram is provided. The latest revision of this manual is available from the Keithley web site. Â©Copyright 2003, Keithley Instruments, Inc.

Вопрос :

Ответ :

Product(s) :

PCI/ISA Plug-In Board: CTM-10

Question : What do I need to know to make my own cable for a CTM-10?

Answer: Revisions of the "CTM-10 and CTM-05/A Users Guide" (P/N 87570) prior to Rev D had an incorrect pin-out diagram (figure 4-2 and figure B-1). With Rev D of this User's Guide, the correct pinout diagram is provided.
The latest revision of this manual is available from the Keithley web site.

Эти часто задаваемые вопросы относятся к

Серия приборов не найдена

Прибор:

Идентификатор часто задаваемых вопросов 69941

Просмотреть все ЧЗВ »