Current Language
×
Russian (Russia)

Выберите язык:

Включить меню
Current Language
×
Russian (Russia)

Выберите язык:

Загрузить

Загрузить руководства, технические описания, программное обеспечение и т. д.:

ТИП ЗАГРУЗКИ
МОДЕЛЬ ИЛИ КЛЮЧЕВОЕ СЛОВО

Обратная связь

IsoVu® Isolated Probes – Connectivity Options


IsoVu Isolated Probes – Connectivity Options

The best performance from the IsoVu measurement system is achieved when an MMCX connector is inserted close to the test points. MMCX connectors are an industry standard and are available from many electronic component distributors. These connectors offer high signal fidelity. The solid metal body and gold contacts provide a well-shielded signal path. The mating MMCX interface offers a snap-on connection with a positive retention force for a stable, hands free connection. The disengage force provides a safe, stable connection for high voltage applications. When an MMCX connector cannot be used, Tektronix offers the below adaptors to connect the sensor tip cables.

2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS

Sensor Tips for IsoVu

Various attenuation high performance Sensor Tips with MMCX, Square Pin, or Wide Square Pin connectors (please reference the IsoVu datasheet or call your Tektronix representative to select the appropriate sensor tip for your application)

Square Pin to MMCX Adapter, 0.100" Spacing (131-9717-xx)

Adapt an MMCX IsoVu tip to standard 0.100" spaced, 0.025" square pins

Square Pin to MMCX Adapter, 0.062" Spacing (131-9677-xx)

Adapt an MMCX IsoVu tip to 0.062" spaced, 0.016" square pins. Perfect for probing across 0402 sense resistors.

Probe Tip Tripod Support (352-1170-xx)

Qty. 2

2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS

Lead, MMCX to IC Grabber (196-3546-xx)

Adapt an MMCX IsoVu tip to springloaded IC Grabbers

Lead, Square Pin to IC Grabber (196-3547-xx)

Adapt 0.100" spaced square pins to spring-loaded IC Grabbers

Lead, Wide Square Pin to Banana Jack (020-3189-xx)

Adapt 0.200" spaced square pins to standard banana jacks (FLAC285 Alligator Clamps included)

MMCX Y-Lead (TPR4KIT)

Adapt an MMCX IsoVu tip to YLead

2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS

Spare Pins for 0.062" Spaced Test Points (020-3169-xx)

Spare 0.016" round pins for creating a test point across an 0402 SMT package.

Solder Aid for 0.062" Spaced Square Pins (003-1946-xx)

Holds 0.016" square pins in place when soldering a test point across an 0402 SMT package.

Flexible Tripod with Quick Release (352-1171-xx)

MMCX Accessory Performance Graphs

2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS

SQPIN Accessory Performance Graphs

2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS

WSQPIN Accessory Performance Graphs

2001 SPECIFIED CALIBRATION INTERVALS 2001 SPECIFIED CALIBRATION INTERVALS

Find more valuable resources at TEK.COM


Copyright © Tektronix. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies.

09/2019 51W-61629-0