Collaboration with Anritsu enables industry leading receiver verification, complementing a world-class transmitter and reference clock test suite
BEAVERTON, Ore., February 26, 2021 -- Tektronix, Inc., a leading global provider of test and measurement solutions, in collaboration with Anritsu, introduced today a new PCI EXPRESS® 5.0 transceiver (Base and CEM) and reference clock solution, becoming the first company to offer early CEM fixtures for pre-compliance testing. The collaboration between Tektronix and Anritsu enables industry-leading receiver verification, complementing a world-class transmitter and reference clock test suite.
PCI EXPRESS continues to extend its industry leadership as the dominant high-speed serial computer bus by doubling bandwidth every three years and exceeding the target with the aggressive introduction of the 5.0 Base Specification (128 GB/s). This rapid development pace is expected to continue as PCI-SIG®, the standard-setting body for peripheral component I/O data transfers, announced the PCI EXPRESS 6.0 specification (256 GB/s) to be delivered in 2021 and include multi-level PAM4 signaling.
“As the first company to offer CEM testing fixtures for PCIe Gen5, we are proud to help our customers once again speed the pace of innovation, giving them a leg up on competition,” says Chris Witt, Tektronix vice president and general manager.
The server/storage industry is rapidly transitioning to PCI EXPRESS 5.0 due to new requirements imposed by 400G ethernet, cloud AI and modeling (co-processors), storage capacity, and NAND-based storage. This rapid progression brings an entirely new problem set for test and measurement traditionally split into Base silicon level validation and CEM compliance testing with the PCI-SIG.
“Electronics designers today demand future-proofing to protect their innovations' longevity into tomorrow,” says Takeshi Shima, vice president of Anritsu corporation. “Providing a solution through Gen6 gives our customers a sense of our commitment to stay with them on the cutting edge of development.”
“As PCIe becomes faster and more complex with the emergence of the Gen5 standard, engineers are faced with new design challenges, shorter time-to-market windows, new standards specifications to understand and apply, and new compliance testing requirements,” says David Bouse, PCI EXPRESS systems engineer at Tektronix. “It is vital to have a comprehensive test equipment and software solution in place prior to workshop certification. Our PCIe 5.0 test and debug solution can easily guide the engineer through compliance testing and debug to ensure their design meets new standards with a high degree of confidence.”
The PCI EXPRESS 5.0 transceiver and reference clock solution from Tektronix was developed and continues to be aligned with the 5.0 Base specification, 5.0 CEM specification, and 5.0 test specifications.
Key features include:
- PCI EXPRESS 5.0 (32 GT/s) automated Base & CEM Transmitter solution running on DPO700000SX series real time oscilloscope and MP1900A Signal Quality Analyser-R series (BERT) from Anritsu
- New Receiver automation software from Tektronix with highly efficient algorithms for stressed eye calibration at 32 GT/s & 16GT/s.
- State-of-the-art tool support including SigTest Phoenix with highly parallelized processing to reduce overall test time
- Multiple form factors (M.2 & U.2) and Clocking Architectures (CC, SRNS, SRIS)
- Follows real time evolution of the 5.0 Base specification with 32 GT/s uncorrelated jitter and pulse width jitter measurements implemented to optimize A/D range and minimize noise
- Addresses the increasing challenges of 100 MHz reference clock jitter and signal integrity measurements through full integration with the Silicon Labs “PCIe Clock Jitter” tool and Tektronix’s DPOJET tool
- Industry first pre compliance test fixtures for PCIe 5.0 CEM testing
Availability
The Tektronix PCI EXPRESS solution is now available worldwide for use with DPO/MSO70000SX/DX.
Contact a Tektronix representative for pricing and additional details or visit uk.tek.com/pci-express.
About Anritsu
Anritsu Company is the United States subsidiary of Anritsu Corporation, a global provider of innovative communications test and measurement solutions for 120 years. Anritsu's "2020 VISION" philosophy engages customers as true partners to help develop wireless, optical, microwave/RF, and digital solutions for R&D, manufacturing, installation, and maintenance applications, as well as multidimensional service assurance solutions for network monitoring and optimization. Anritsu also provides precision microwave/RF components, optical devices, and high-speed electrical devices for communication products and systems. The company develops advanced solutions for 5G, M2M, IoT, as well as other emerging and legacy wireline and wireless communication markets. With offices throughout the world, Anritsu has approximately 4,000 employees in over 90 countries. To learn more, visit www.anritsu.com and follow Anritsu on Facebook, LinkedIn, Twitter, and YouTube. More information on the MP1900A Signal Quality Analyzer-R series (BERT) is here.
About Tektronix
Tektronix, Inc., headquartered in Beaverton, Oregon, delivers innovative, precise and easy-to-operate test, measurement and monitoring solutions that solve problems, unlock insights and drive discovery globally. Tektronix has been at the forefront of the digital age for over 70 years. More information on our products and solutions is available at uk.tek.com.
Follow us on LinkedIn, Facebook, Twitter, YouTube and Instagram, and to stay connected. Learn more from our engineers on the Tektronix blog and read our latest announcements in our Newsroom.
Tektronix is a registered trademark of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies.
Media Contact: Editorial Contact:
Tektronix Napier Partnership Limited
Petra Quaedvlieg Rhianna Bull
T: +49-221 94 77 277 T: +44 1243 531123
[email protected] [email protected]
Tek.com www.napierb2b.com